power: supply: rt9756: Add Richtek RT9756 smart cap divider charger

Add support for RT9756 smart cap divider charger.

The RT9759 is a high efficiency and high charge current charger. The
maximum charge current is up to 8A. It integrates a dual-phase charge
pump core with ADC monitoring.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/f682812069b6be2138bfdae2ff9a9c84994d5b64.1761894605.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

drivers/power/supply/Kconfig

@@ -931,6 +931,21 @@ config CHARGER_RT9471
 	  This driver can also be built as a module. If so, the module will be
 	  called rt9471.
 
+config CHARGER_RT9756
+	tristate "Richtek RT9756 smart cap divider charger driver"
+	depends on I2C
+	select REGMAP_I2C
+	select LINEAR_RANGES
+	help
+	  This adds support for Richtek RT9756 smart cap divider charger driver.
+	  It's a high efficiency and high charge current charger. the device
+	  integrates smart cap divider topology with 9-channel high speed
+	  ADCs that can provide input and output voltage, current and
+	  temperature monitoring.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called rt9756.
+
 config CHARGER_CROS_USBPD
 	tristate "ChromeOS EC based USBPD charger"
 	depends on CROS_USBPD_NOTIFY

drivers/power/supply/Makefile

@@ -64,6 +64,7 @@ obj-$(CONFIG_CHARGER_RT5033)	+= rt5033_charger.o
 obj-$(CONFIG_CHARGER_RT9455)	+= rt9455_charger.o
 obj-$(CONFIG_CHARGER_RT9467)	+= rt9467-charger.o
 obj-$(CONFIG_CHARGER_RT9471)	+= rt9471.o
+obj-$(CONFIG_CHARGER_RT9756)	+= rt9756.o
 obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
 obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o