Merge branch 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem update from Bryan Wu.

* 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits)
  leds-lp8788: forgotten unlock at lp8788_led_work
  LEDS: propagate error codes in blinkm_detect()
  LEDS: memory leak in blinkm_led_common_set()
  leds: add new lp8788 led driver
  LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS
  leds: max8997: Simplify max8997_led_set_mode implementation
  leds/leds-s3c24xx: use devm_gpio_request
  leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert DAC124S085 LED driver to devm_kzalloc()
  leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert TCA6507 LED driver to devm_kzalloc()
  leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9532 LED driver to devm_kzalloc()
  leds: convert LT3593 LED driver to devm_kzalloc()
  leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9633 LED driver to devm_kzalloc()
  ...

Documentation/leds/00-INDEX

@@ -6,3 +6,5 @@ leds-lp5521.txt
 	- notes on how to use the leds-lp5521 driver.
 leds-lp5523.txt
 	- notes on how to use the leds-lp5523 driver.
+leds-lm3556.txt
+	- notes on how to use the leds-lm3556 driver.

Documentation/leds/leds-blinkm.txt

@@ -0,0 +1,80 @@
+The leds-blinkm driver supports the devices of the BlinkM family.
+
+They are RGB-LED modules driven by a (AT)tiny microcontroller and
+communicate through I2C. The default address of these modules is
+0x09 but this can be changed through a command. By this you could
+dasy-chain up to 127 BlinkMs on an I2C bus.
+
+The device accepts RGB and HSB color values through separate commands.
+Also you can store blinking sequences as "scripts" in
+the controller and run them. Also fading is an option.
+
+The interface this driver provides is 2-fold:
+
+a) LED class interface for use with triggers
+############################################
+
+The registration follows the scheme:
+blinkm-<i2c-bus-nr>-<i2c-device-nr>-<color>
+
+$ ls -h /sys/class/leds/blinkm-6-*
+/sys/class/leds/blinkm-6-9-blue:
+brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+/sys/class/leds/blinkm-6-9-green:
+brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+/sys/class/leds/blinkm-6-9-red:
+brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+(same is /sys/bus/i2c/devices/6-0009/leds)
+
+We can control the colors separated into red, green and blue and
+assign triggers on each color.
+
+E.g.:
+
+$ cat blinkm-6-9-blue/brightness
+05
+
+$ echo 200 > blinkm-6-9-blue/brightness
+$
+
+$ modprobe ledtrig-heartbeat
+$ echo heartbeat > blinkm-6-9-green/trigger
+$
+
+
+b) Sysfs group to control rgb, fade, hsb, scripts ...
+#####################################################
+
+This extended interface is available as folder blinkm
+in the sysfs folder of the I2C device.
+E.g. below /sys/bus/i2c/devices/6-0009/blinkm
+
+$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/
+blue  green  red  test
+
+Currently supported is just setting red, green, blue
+and a test sequence.
+
+E.g.:
+
+$ cat *
+00
+00
+00
+#Write into test to start test sequence!#
+
+$ echo 1 > test
+$
+
+$ echo 255 > red
+$
+
+
+
+as of 6/2012
+
+dl9pf <at> gmx <dot> de
+

Documentation/leds/leds-lm3556.txt

@@ -0,0 +1,85 @@
+Kernel driver for lm3556
+========================
+
+*Texas Instrument:
+ 1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
+* Datasheet: http://www.national.com/ds/LM/LM3556.pdf
+
+Authors:
+	Daniel Jeong
+	Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com)
+
+Description
+-----------
+There are 3 functions in LM3556, Flash, Torch and Indicator.
+
+FLASH MODE
+In Flash Mode, the LED current source(LED) provides 16 target current levels
+from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
+CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
+or by pulling the STROBE pin HIGH.
+LM3556 Flash can be controlled through sys/class/leds/flash/brightness file
+* if STROBE pin is enabled, below example control brightness only, and
+ON / OFF will be controlled by STROBE pin.
+
+Flash Example:
+OFF     : #echo 0 > sys/class/leds/flash/brightness
+93.75 mA: #echo 1 > sys/class/leds/flash/brightness
+... .....
+1500  mA: #echo 16 > sys/class/leds/flash/brightness
+
+TORCH MODE
+In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
+REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
+hardware TORCH input.
+LM3556 torch can be controlled through sys/class/leds/torch/brightness file.
+* if TORCH pin is enabled, below example control brightness only,
+and ON / OFF will be controlled by TORCH pin.
+
+Torch Example:
+OFF     : #echo 0 > sys/class/leds/torch/brightness
+46.88 mA: #echo 1 > sys/class/leds/torch/brightness
+... .....
+375 mA  : #echo 8 > sys/class/leds/torch/brightness
+
+INDICATOR MODE
+Indicator pattern can be set through sys/class/leds/indicator/pattern file,
+and 4 patterns are pre-defined in indicator_pattern array.
+According to N-lank, Pulse time and N Period values, different pattern wiill
+be generated.If you want new patterns for your own device, change
+indicator_pattern array with your own values and INDIC_PATTERN_SIZE.
+Please refer datasheet for more detail about N-Blank, Pulse time and N Period.
+
+Indicator pattern example:
+pattern 0: #echo 0 > sys/class/leds/indicator/pattern
+....
+pattern 3: #echo 3 > sys/class/leds/indicator/pattern
+
+Indicator brightness can be controlled through
+sys/class/leds/indicator/brightness file.
+
+Example:
+OFF      : #echo 0 > sys/class/leds/indicator/brightness
+5.86 mA  : #echo 1 > sys/class/leds/indicator/brightness
+........
+46.875mA : #echo 8 > sys/class/leds/indicator/brightness
+
+Notes
+-----
+Driver expects it is registered using the i2c_board_info mechanism.
+To register the chip at address 0x63 on specific adapter, set the platform data
+according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
+
+Example:
+	static struct i2c_board_info __initdata board_i2c_ch4[]	= {
+		{
+			 I2C_BOARD_INFO(LM3556_NAME, 0x63),
+			 .platform_data = &lm3556_pdata,
+		 },
+	};
+
+and register it in the platform init function
+
+Example:
+	board_register_i2c_bus(4, 400,
+				board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4));

Documentation/leds/ledtrig-oneshot.txt

@@ -0,0 +1,59 @@
+One-shot LED Trigger
+====================
+
+This is a LED trigger useful for signaling the user of an event where there are
+no clear trap points to put standard led-on and led-off settings.  Using this
+trigger, the application needs only to signal the trigger when an event has
+happened, than the trigger turns the LED on and than keeps it off for a
+specified amount of time.
+
+This trigger is meant to be usable both for sporadic and dense events.  In the
+first case, the trigger produces a clear single controlled blink for each
+event, while in the latter it keeps blinking at constant rate, as to signal
+that the events are arriving continuously.
+
+A one-shot LED only stays in a constant state when there are no events.  An
+additional "invert" property specifies if the LED has to stay off (normal) or
+on (inverted) when not rearmed.
+
+The trigger can be activated from user space on led class devices as shown
+below:
+
+  echo oneshot > trigger
+
+This adds the following sysfs attributes to the LED:
+
+  delay_on - specifies for how many milliseconds the LED has to stay at
+             LED_FULL brightness after it has been armed.
+             Default to 100 ms.
+
+  delay_off - specifies for how many milliseconds the LED has to stay at
+              LED_OFF brightness after it has been armed.
+              Default to 100 ms.
+
+  invert - reverse the blink logic.  If set to 0 (default) blink on for delay_on
+           ms, then blink off for delay_off ms, leaving the LED normally off.  If
+           set to 1, blink off for delay_off ms, then blink on for delay_on ms,
+           leaving the LED normally on.
+           Setting this value also immediately change the LED state.
+
+  shot - write any non-empty string to signal an events, this starts a blink
+         sequence if not already running.
+
+Example use-case: network devices, initialization:
+
+  echo oneshot > trigger # set trigger for this led
+  echo 33 > delay_on     # blink at 1 / (33 + 33) Hz on continuous traffic
+  echo 33 > delay_off
+
+interface goes up:
+
+  echo 1 > invert # set led as normally-on, turn the led on
+
+packet received/transmitted:
+
+  echo 1 > shot # led starts blinking, ignored if already blinking
+
+interface goes down
+
+  echo 0 > invert # set led as normally-off, turn the led off

MAINTAINERS

@@ -1529,6 +1529,11 @@ W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
 
+BLINKM RGB LED DRIVER
+M:	Jan-Simon Moeller <jansimon.moeller@gmx.de>
+S:	Maintained
+F:	drivers/leds/leds-blinkm.c
+
 BLOCK LAYER
 M:	Jens Axboe <axboe@kernel.dk>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git

drivers/leds/Kconfig

@@ -200,6 +200,13 @@ config LEDS_LP5523
 	  Driver provides direct control via LED class and interface for
 	  programming the engines.
 
+config LEDS_LP8788
+	tristate "LED support for the TI LP8788 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_LP8788
+	help
+	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
+
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
 	depends on LEDS_CLASS
@@ -415,6 +422,14 @@ config LEDS_MAX8997
 	  This option enables support for on-chip LED drivers on
 	  MAXIM MAX8997 PMIC.
 
+config LEDS_LM3556
+	tristate "LED support for LM3556 Chip"
+	depends on LEDS_CLASS && I2C
+	select REGMAP_I2C
+	help
+	  This option enables support for LEDs connected to LM3556.
+	  LM3556 includes Torch, Flash and Indicator functions.
+
 config LEDS_OT200
 	tristate "LED support for the Bachmann OT200"
 	depends on LEDS_CLASS && HAS_IOMEM
@@ -422,6 +437,14 @@ config LEDS_OT200
 	  This option enables support for the LEDs on the Bachmann OT200.
 	  Say Y to enable LEDs on the Bachmann OT200.
 
+config LEDS_BLINKM
+	tristate "LED support for the BlinkM I2C RGB LED"
+	depends on LEDS_CLASS
+	depends on I2C
+	help
+	  This option enables support for the BlinkM RGB LED connected
+	  through I2C. Say Y to enable support for the BlinkM LED.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	depends on LEDS_CLASS
@@ -443,6 +466,20 @@ config LEDS_TRIGGER_TIMER
 
 	  If unsure, say Y.
 
+config LEDS_TRIGGER_ONESHOT
+	tristate "LED One-shot Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to blink in one-shot pulses with parameters
+	  controlled via sysfs.  It's useful to notify the user on
+	  sporadic events, when there are no clear begin and end trap points,
+	  or on dense events, where this blinks the LED at constant rate if
+	  rearmed continuously.
+
+	  It also shows how to use the led_blink_set_oneshot() function.
+
+	  If unsure, say Y.
+
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
 	depends on IDE_GD_ATA
@@ -497,7 +534,7 @@ config LEDS_TRIGGER_TRANSIENT
 	depends on LEDS_TRIGGERS
 	help
 	  This allows one time activation of a transient state on
-	  GPIO/PWM based hadrware.
+	  GPIO/PWM based hardware.
 	  If unsure, say Y.
 
 endif # NEW_LEDS

drivers/leds/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
+obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
@@ -47,12 +48,15 @@ obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_RENESAS_TPU)		+= leds-renesas-tpu.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
+obj-$(CONFIG_LEDS_LM3556)		+= leds-lm3556.o
+obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
 obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
 obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
 obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o

drivers/leds/led-class.c

@@ -53,7 +53,7 @@ static ssize_t led_brightness_store(struct device *dev,
 
 	if (state == LED_OFF)
 		led_trigger_remove(led_cdev);
-	led_set_brightness(led_cdev, state);
+	__led_set_brightness(led_cdev, state);
 
 	return size;
 }
@@ -82,7 +82,12 @@ static void led_timer_function(unsigned long data)
 	unsigned long delay;
 
 	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
-		led_set_brightness(led_cdev, LED_OFF);
+		__led_set_brightness(led_cdev, LED_OFF);
+		return;
+	}
+
+	if (led_cdev->flags & LED_BLINK_ONESHOT_STOP) {
+		led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
 		return;
 	}
 
@@ -100,7 +105,21 @@ static void led_timer_function(unsigned long data)
 		delay = led_cdev->blink_delay_off;
 	}
 
-	led_set_brightness(led_cdev, brightness);
+	__led_set_brightness(led_cdev, brightness);
+
+	/* Return in next iteration if led is in one-shot mode and we are in
+	 * the final blink state so that the led is toggled each delay_on +
+	 * delay_off milliseconds in worst case.
+	 */
+	if (led_cdev->flags & LED_BLINK_ONESHOT) {
+		if (led_cdev->flags & LED_BLINK_INVERT) {
+			if (brightness)
+				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+		} else {
+			if (!brightness)
+				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+		}
+	}
 
 	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
 }
@@ -203,7 +222,7 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 #endif
 
 	/* Stop blinking */
-	led_brightness_set(led_cdev, LED_OFF);
+	led_set_brightness(led_cdev, LED_OFF);
 
 	device_unregister(led_cdev->dev);
 

drivers/leds/led-core.c

@@ -24,14 +24,6 @@ EXPORT_SYMBOL_GPL(leds_list_lock);
 LIST_HEAD(leds_list);
 EXPORT_SYMBOL_GPL(leds_list);
 
-static void led_stop_software_blink(struct led_classdev *led_cdev)
-{
-	/* deactivate previous settings */
-	del_timer_sync(&led_cdev->blink_timer);
-	led_cdev->blink_delay_on = 0;
-	led_cdev->blink_delay_off = 0;
-}
-
 static void led_set_software_blink(struct led_classdev *led_cdev,
 				   unsigned long delay_on,
 				   unsigned long delay_off)
@@ -53,7 +45,7 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 
 	/* never off - just set to brightness */
 	if (!delay_off) {
-		led_set_brightness(led_cdev, led_cdev->blink_brightness);
+		__led_set_brightness(led_cdev, led_cdev->blink_brightness);
 		return;
 	}
 
@@ -61,13 +53,12 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 }
 
 
-void led_blink_set(struct led_classdev *led_cdev,
-		   unsigned long *delay_on,
-		   unsigned long *delay_off)
+static void led_blink_setup(struct led_classdev *led_cdev,
+		     unsigned long *delay_on,
+		     unsigned long *delay_off)
 {
-	del_timer_sync(&led_cdev->blink_timer);
-
-	if (led_cdev->blink_set &&
+	if (!(led_cdev->flags & LED_BLINK_ONESHOT) &&
+	    led_cdev->blink_set &&
 	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
 		return;
 
@@ -77,12 +68,49 @@ void led_blink_set(struct led_classdev *led_cdev,
 
 	led_set_software_blink(led_cdev, *delay_on, *delay_off);
 }
+
+void led_blink_set(struct led_classdev *led_cdev,
+		   unsigned long *delay_on,
+		   unsigned long *delay_off)
+{
+	del_timer_sync(&led_cdev->blink_timer);
+
+	led_cdev->flags &= ~LED_BLINK_ONESHOT;
+	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+
+	led_blink_setup(led_cdev, delay_on, delay_off);
+}
 EXPORT_SYMBOL(led_blink_set);
 
-void led_brightness_set(struct led_classdev *led_cdev,
+void led_blink_set_oneshot(struct led_classdev *led_cdev,
+			   unsigned long *delay_on,
+			   unsigned long *delay_off,
+			   int invert)
+{
+	if ((led_cdev->flags & LED_BLINK_ONESHOT) &&
+	     timer_pending(&led_cdev->blink_timer))
+		return;
+
+	led_cdev->flags |= LED_BLINK_ONESHOT;
+	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+
+	if (invert)
+		led_cdev->flags |= LED_BLINK_INVERT;
+	else
+		led_cdev->flags &= ~LED_BLINK_INVERT;
+
+	led_blink_setup(led_cdev, delay_on, delay_off);
+}
+EXPORT_SYMBOL(led_blink_set_oneshot);
+
+void led_set_brightness(struct led_classdev *led_cdev,
 			enum led_brightness brightness)
 {
-	led_stop_software_blink(led_cdev);
-	led_cdev->brightness_set(led_cdev, brightness);
+	/* stop and clear soft-blink timer */
+	del_timer_sync(&led_cdev->blink_timer);
+	led_cdev->blink_delay_on = 0;
+	led_cdev->blink_delay_off = 0;
+
+	__led_set_brightness(led_cdev, brightness);
 }
-EXPORT_SYMBOL(led_brightness_set);
+EXPORT_SYMBOL(led_set_brightness);

drivers/leds/led-triggers.c

@@ -99,7 +99,7 @@ ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
 EXPORT_SYMBOL_GPL(led_trigger_show);
 
 /* Caller must ensure led_cdev->trigger_lock held */
-void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
+void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 {
 	unsigned long flags;
 
@@ -112,15 +112,15 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
 		if (led_cdev->trigger->deactivate)
 			led_cdev->trigger->deactivate(led_cdev);
 		led_cdev->trigger = NULL;
-		led_brightness_set(led_cdev, LED_OFF);
+		led_set_brightness(led_cdev, LED_OFF);
 	}
-	if (trigger) {
-		write_lock_irqsave(&trigger->leddev_list_lock, flags);
-		list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
-		write_unlock_irqrestore(&trigger->leddev_list_lock, flags);
-		led_cdev->trigger = trigger;
-		if (trigger->activate)
-			trigger->activate(led_cdev);
+	if (trig) {
+		write_lock_irqsave(&trig->leddev_list_lock, flags);
+		list_add_tail(&led_cdev->trig_list, &trig->led_cdevs);
+		write_unlock_irqrestore(&trig->leddev_list_lock, flags);
+		led_cdev->trigger = trig;
+		if (trig->activate)
+			trig->activate(led_cdev);
 	}
 }
 EXPORT_SYMBOL_GPL(led_trigger_set);
@@ -153,24 +153,24 @@ EXPORT_SYMBOL_GPL(led_trigger_set_default);
 
 /* LED Trigger Interface */
 
-int led_trigger_register(struct led_trigger *trigger)
+int led_trigger_register(struct led_trigger *trig)
 {
 	struct led_classdev *led_cdev;
-	struct led_trigger *trig;
+	struct led_trigger *_trig;
 
-	rwlock_init(&trigger->leddev_list_lock);
-	INIT_LIST_HEAD(&trigger->led_cdevs);
+	rwlock_init(&trig->leddev_list_lock);
+	INIT_LIST_HEAD(&trig->led_cdevs);
 
 	down_write(&triggers_list_lock);
 	/* Make sure the trigger's name isn't already in use */
-	list_for_each_entry(trig, &trigger_list, next_trig) {
-		if (!strcmp(trig->name, trigger->name)) {
+	list_for_each_entry(_trig, &trigger_list, next_trig) {
+		if (!strcmp(_trig->name, trig->name)) {
 			up_write(&triggers_list_lock);
 			return -EEXIST;
 		}
 	}
 	/* Add to the list of led triggers */
-	list_add_tail(&trigger->next_trig, &trigger_list);
+	list_add_tail(&trig->next_trig, &trigger_list);
 	up_write(&triggers_list_lock);
 
 	/* Register with any LEDs that have this as a default trigger */
@@ -178,8 +178,8 @@ int led_trigger_register(struct led_trigger *trigger)
 	list_for_each_entry(led_cdev, &leds_list, node) {
 		down_write(&led_cdev->trigger_lock);
 		if (!led_cdev->trigger && led_cdev->default_trigger &&
-			    !strcmp(led_cdev->default_trigger, trigger->name))
-			led_trigger_set(led_cdev, trigger);
+			    !strcmp(led_cdev->default_trigger, trig->name))
+			led_trigger_set(led_cdev, trig);
 		up_write(&led_cdev->trigger_lock);
 	}
 	up_read(&leds_list_lock);
@@ -188,20 +188,20 @@ int led_trigger_register(struct led_trigger *trigger)
 }
 EXPORT_SYMBOL_GPL(led_trigger_register);
 
-void led_trigger_unregister(struct led_trigger *trigger)
+void led_trigger_unregister(struct led_trigger *trig)
 {
 	struct led_classdev *led_cdev;
 
 	/* Remove from the list of led triggers */
 	down_write(&triggers_list_lock);
-	list_del(&trigger->next_trig);
+	list_del(&trig->next_trig);
 	up_write(&triggers_list_lock);
 
 	/* Remove anyone actively using this trigger */
 	down_read(&leds_list_lock);
 	list_for_each_entry(led_cdev, &leds_list, node) {
 		down_write(&led_cdev->trigger_lock);
-		if (led_cdev->trigger == trigger)
+		if (led_cdev->trigger == trig)
 			led_trigger_set(led_cdev, NULL);
 		up_write(&led_cdev->trigger_lock);
 	}
@@ -211,58 +211,80 @@ EXPORT_SYMBOL_GPL(led_trigger_unregister);
 
 /* Simple LED Tigger Interface */
 
-void led_trigger_event(struct led_trigger *trigger,
+void led_trigger_event(struct led_trigger *trig,
 			enum led_brightness brightness)
 {
 	struct list_head *entry;
 
-	if (!trigger)
+	if (!trig)
 		return;
 
-	read_lock(&trigger->leddev_list_lock);
-	list_for_each(entry, &trigger->led_cdevs) {
+	read_lock(&trig->leddev_list_lock);
+	list_for_each(entry, &trig->led_cdevs) {
 		struct led_classdev *led_cdev;
 
 		led_cdev = list_entry(entry, struct led_classdev, trig_list);
 		led_set_brightness(led_cdev, brightness);
 	}
-	read_unlock(&trigger->leddev_list_lock);
+	read_unlock(&trig->leddev_list_lock);
 }
 EXPORT_SYMBOL_GPL(led_trigger_event);
 
-void led_trigger_blink(struct led_trigger *trigger,
-		       unsigned long *delay_on,
-		       unsigned long *delay_off)
+static void led_trigger_blink_setup(struct led_trigger *trig,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off,
+			     int oneshot,
+			     int invert)
 {
 	struct list_head *entry;
 
-	if (!trigger)
+	if (!trig)
 		return;
 
-	read_lock(&trigger->leddev_list_lock);
-	list_for_each(entry, &trigger->led_cdevs) {
+	read_lock(&trig->leddev_list_lock);
+	list_for_each(entry, &trig->led_cdevs) {
 		struct led_classdev *led_cdev;
 
 		led_cdev = list_entry(entry, struct led_classdev, trig_list);
-		led_blink_set(led_cdev, delay_on, delay_off);
+		if (oneshot)
+			led_blink_set_oneshot(led_cdev, delay_on, delay_off,
+					      invert);
+		else
+			led_blink_set(led_cdev, delay_on, delay_off);
 	}
-	read_unlock(&trigger->leddev_list_lock);
+	read_unlock(&trig->leddev_list_lock);
+}
+
+void led_trigger_blink(struct led_trigger *trig,
+		       unsigned long *delay_on,
+		       unsigned long *delay_off)
+{
+	led_trigger_blink_setup(trig, delay_on, delay_off, 0, 0);
 }
 EXPORT_SYMBOL_GPL(led_trigger_blink);
 
+void led_trigger_blink_oneshot(struct led_trigger *trig,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off,
+			       int invert)
+{
+	led_trigger_blink_setup(trig, delay_on, delay_off, 1, invert);
+}
+EXPORT_SYMBOL_GPL(led_trigger_blink_oneshot);
+
 void led_trigger_register_simple(const char *name, struct led_trigger **tp)
 {
-	struct led_trigger *trigger;
+	struct led_trigger *trig;
 	int err;
 
-	trigger = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+	trig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
 
-	if (trigger) {
-		trigger->name = name;
-		err = led_trigger_register(trigger);
+	if (trig) {
+		trig->name = name;
+		err = led_trigger_register(trig);
 		if (err < 0) {
-			kfree(trigger);
-			trigger = NULL;
+			kfree(trig);
+			trig = NULL;
 			printk(KERN_WARNING "LED trigger %s failed to register"
 				" (%d)\n", name, err);
 		}
@@ -270,15 +292,15 @@ void led_trigger_register_simple(const char *name, struct led_trigger **tp)
 		printk(KERN_WARNING "LED trigger %s failed to register"
 			" (no memory)\n", name);
 
-	*tp = trigger;
+	*tp = trig;
 }
 EXPORT_SYMBOL_GPL(led_trigger_register_simple);
 
-void led_trigger_unregister_simple(struct led_trigger *trigger)
+void led_trigger_unregister_simple(struct led_trigger *trig)
 {
-	if (trigger)
-		led_trigger_unregister(trigger);
-	kfree(trigger);
+	if (trig)
+		led_trigger_unregister(trig);
+	kfree(trig);
 }
 EXPORT_SYMBOL_GPL(led_trigger_unregister_simple);
 

drivers/leds/leds-88pm860x.c

@@ -209,7 +209,7 @@ static int pm860x_led_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	data = kzalloc(sizeof(struct pm860x_led), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_led), GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 	strncpy(data->name, res->name, MFD_NAME_SIZE - 1);
@@ -220,7 +220,6 @@ static int pm860x_led_probe(struct platform_device *pdev)
 	data->port = pdata->flags;
 	if (data->port < 0) {
 		dev_err(&pdev->dev, "check device failed\n");
-		kfree(data);
 		return -EINVAL;
 	}
 
@@ -233,13 +232,10 @@ static int pm860x_led_probe(struct platform_device *pdev)
 	ret = led_classdev_register(chip->dev, &data->cdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
-		goto out;
+		return ret;
 	}
 	pm860x_led_set(&data->cdev, 0);
 	return 0;
-out:
-	kfree(data);
-	return ret;
 }
 
 static int pm860x_led_remove(struct platform_device *pdev)
@@ -247,7 +243,6 @@ static int pm860x_led_remove(struct platform_device *pdev)
 	struct pm860x_led *data = platform_get_drvdata(pdev);
 
 	led_classdev_unregister(&data->cdev);
-	kfree(data);
 
 	return 0;
 }

drivers/leds/leds-adp5520.c

@@ -119,7 +119,8 @@ static int __devinit adp5520_led_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
-	led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL);
+	led = devm_kzalloc(&pdev->dev, sizeof(*led) * pdata->num_leds,
+				GFP_KERNEL);
 	if (led == NULL) {
 		dev_err(&pdev->dev, "failed to alloc memory\n");
 		return -ENOMEM;
@@ -129,7 +130,7 @@ static int __devinit adp5520_led_probe(struct platform_device *pdev)
 
 	if (ret) {
 		dev_err(&pdev->dev, "failed to write\n");
-		goto err_free;
+		return ret;
 	}
 
 	for (i = 0; i < pdata->num_leds; ++i) {
@@ -179,8 +180,6 @@ err:
 		}
 	}
 
-err_free:
-	kfree(led);
 	return ret;
 }
 
@@ -200,7 +199,6 @@ static int __devexit adp5520_led_remove(struct platform_device *pdev)
 		cancel_work_sync(&led[i].work);
 	}
 
-	kfree(led);
 	return 0;
 }
 

drivers/leds/leds-asic3.c

@@ -99,12 +99,13 @@ static int __devinit asic3_led_probe(struct platform_device *pdev)
 
 	ret = mfd_cell_enable(pdev);
 	if (ret < 0)
-		goto ret0;
+		return ret;
 
-	led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL);
+	led->cdev = devm_kzalloc(&pdev->dev, sizeof(struct led_classdev),
+				GFP_KERNEL);
 	if (!led->cdev) {
 		ret = -ENOMEM;
-		goto ret1;
+		goto out;
 	}
 
 	led->cdev->name = led->name;
@@ -115,15 +116,12 @@ static int __devinit asic3_led_probe(struct platform_device *pdev)
 
 	ret = led_classdev_register(&pdev->dev, led->cdev);
 	if (ret < 0)
-		goto ret2;
+		goto out;
 
 	return 0;
 
-ret2:
-	kfree(led->cdev);
-ret1:
+out:
 	(void) mfd_cell_disable(pdev);
-ret0:
 	return ret;
 }
 
@@ -133,8 +131,6 @@ static int __devexit asic3_led_remove(struct platform_device *pdev)
 
 	led_classdev_unregister(led->cdev);
 
-	kfree(led->cdev);
-
 	return mfd_cell_disable(pdev);
 }
 

drivers/leds/leds-atmel-pwm.c

@@ -46,7 +46,8 @@ static int __devinit pwmled_probe(struct platform_device *pdev)
 	if (!pdata || pdata->num_leds < 1)
 		return -ENODEV;
 
-	leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
+	leds = devm_kzalloc(&pdev->dev, pdata->num_leds * sizeof(*leds),
+			GFP_KERNEL);
 	if (!leds)
 		return -ENOMEM;
 
@@ -108,7 +109,6 @@ err:
 			pwm_channel_free(&leds[i].pwmc);
 		}
 	}
-	kfree(leds);
 
 	return status;
 }
@@ -129,7 +129,6 @@ static int __exit pwmled_remove(struct platform_device *pdev)
 		pwm_channel_free(&led->pwmc);
 	}
 
-	kfree(leds);
 	platform_set_drvdata(pdev, NULL);
 	return 0;
 }

drivers/leds/leds-bd2802.c

@@ -677,7 +677,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 	struct bd2802_led_platform_data *pdata;
 	int ret, i;
 
-	led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
+	led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL);
 	if (!led) {
 		dev_err(&client->dev, "failed to allocate driver data\n");
 		return -ENOMEM;
@@ -697,7 +697,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 	ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00);
 	if (ret < 0) {
 		dev_err(&client->dev, "failed to detect device\n");
-		goto failed_free;
+		return ret;
 	} else
 		dev_info(&client->dev, "return 0x%02x\n", ret);
 
@@ -729,9 +729,6 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 failed_unregister_dev_file:
 	for (i--; i >= 0; i--)
 		device_remove_file(&led->client->dev, bd2802_attributes[i]);
-failed_free:
-	kfree(led);
-
 	return ret;
 }
 
@@ -746,7 +743,6 @@ static int __exit bd2802_remove(struct i2c_client *client)
 		bd2802_disable_adv_conf(led);
 	for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
 		device_remove_file(&led->client->dev, bd2802_attributes[i]);
-	kfree(led);
 
 	return 0;
 }

drivers/leds/leds-da903x.c

@@ -108,7 +108,7 @@ static int __devinit da903x_led_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	led = kzalloc(sizeof(struct da903x_led), GFP_KERNEL);
+	led = devm_kzalloc(&pdev->dev, sizeof(struct da903x_led), GFP_KERNEL);
 	if (led == NULL) {
 		dev_err(&pdev->dev, "failed to alloc memory for LED%d\n", id);
 		return -ENOMEM;
@@ -129,15 +129,11 @@ static int __devinit da903x_led_probe(struct platform_device *pdev)
 	ret = led_classdev_register(led->master, &led->cdev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register LED %d\n", id);
-		goto err;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, led);
 	return 0;
-
-err:
-	kfree(led);
-	return ret;
 }
 
 static int __devexit da903x_led_remove(struct platform_device *pdev)
@@ -145,7 +141,6 @@ static int __devexit da903x_led_remove(struct platform_device *pdev)
 	struct da903x_led *led = platform_get_drvdata(pdev);
 
 	led_classdev_unregister(&led->cdev);
-	kfree(led);
 	return 0;
 }
 

drivers/leds/leds-dac124s085.c

@@ -69,7 +69,7 @@ static int dac124s085_probe(struct spi_device *spi)
 	struct dac124s085_led	*led;
 	int i, ret;
 
-	dac = kzalloc(sizeof(*dac), GFP_KERNEL);
+	dac = devm_kzalloc(&spi->dev, sizeof(*dac), GFP_KERNEL);
 	if (!dac)
 		return -ENOMEM;
 
@@ -102,7 +102,6 @@ eledcr:
 		led_classdev_unregister(&dac->leds[i].ldev);
 
 	spi_set_drvdata(spi, NULL);
-	kfree(dac);
 	return ret;
 }
 
@@ -117,7 +116,6 @@ static int dac124s085_remove(struct spi_device *spi)
 	}
 
 	spi_set_drvdata(spi, NULL);
-	kfree(dac);
 
 	return 0;
 }

drivers/leds/leds-gpio.c

@@ -178,7 +178,8 @@ static struct gpio_leds_priv * __devinit gpio_leds_create_of(struct platform_dev
 	if (!count)
 		return NULL;
 
-	priv = kzalloc(sizeof_gpio_leds_priv(count), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev, sizeof_gpio_leds_priv(count),
+			GFP_KERNEL);
 	if (!priv)
 		return NULL;
 
@@ -215,7 +216,6 @@ static struct gpio_leds_priv * __devinit gpio_leds_create_of(struct platform_dev
 err:
 	for (count = priv->num_leds - 2; count >= 0; count--)
 		delete_gpio_led(&priv->leds[count]);
-	kfree(priv);
 	return NULL;
 }
 
@@ -239,8 +239,9 @@ static int __devinit gpio_led_probe(struct platform_device *pdev)
 	int i, ret = 0;
 
 	if (pdata && pdata->num_leds) {
-		priv = kzalloc(sizeof_gpio_leds_priv(pdata->num_leds),
-				GFP_KERNEL);
+		priv = devm_kzalloc(&pdev->dev,
+				sizeof_gpio_leds_priv(pdata->num_leds),
+					GFP_KERNEL);
 		if (!priv)
 			return -ENOMEM;
 
@@ -253,7 +254,6 @@ static int __devinit gpio_led_probe(struct platform_device *pdev)
 				/* On failure: unwind the led creations */
 				for (i = i - 1; i >= 0; i--)
 					delete_gpio_led(&priv->leds[i]);
-				kfree(priv);
 				return ret;
 			}
 		}
@@ -277,7 +277,6 @@ static int __devexit gpio_led_remove(struct platform_device *pdev)
 		delete_gpio_led(&priv->leds[i]);
 
 	dev_set_drvdata(&pdev->dev, NULL);
-	kfree(priv);
 
 	return 0;
 }

drivers/leds/leds-lm3530.c

@@ -386,28 +386,24 @@ static int __devinit lm3530_probe(struct i2c_client *client,
 
 	if (pdata == NULL) {
 		dev_err(&client->dev, "platform data required\n");
-		err = -ENODEV;
-		goto err_out;
+		return -ENODEV;
 	}
 
 	/* BL mode */
 	if (pdata->mode > LM3530_BL_MODE_PWM) {
 		dev_err(&client->dev, "Illegal Mode request\n");
-		err = -EINVAL;
-		goto err_out;
+		return -EINVAL;
 	}
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		dev_err(&client->dev, "I2C_FUNC_I2C not supported\n");
-		err = -EIO;
-		goto err_out;
+		return -EIO;
 	}
 
-	drvdata = kzalloc(sizeof(struct lm3530_data), GFP_KERNEL);
-	if (drvdata == NULL) {
-		err = -ENOMEM;
-		goto err_out;
-	}
+	drvdata = devm_kzalloc(&client->dev, sizeof(struct lm3530_data),
+				GFP_KERNEL);
+	if (drvdata == NULL)
+		return -ENOMEM;
 
 	drvdata->mode = pdata->mode;
 	drvdata->client = client;
@@ -425,7 +421,7 @@ static int __devinit lm3530_probe(struct i2c_client *client,
 		dev_err(&client->dev, "regulator get failed\n");
 		err = PTR_ERR(drvdata->regulator);
 		drvdata->regulator = NULL;
-		goto err_regulator_get;
+		return err;
 	}
 
 	if (drvdata->pdata->brt_val) {
@@ -458,9 +454,6 @@ err_create_file:
 err_class_register:
 err_reg_init:
 	regulator_put(drvdata->regulator);
-err_regulator_get:
-	kfree(drvdata);
-err_out:
 	return err;
 }
 
@@ -474,7 +467,6 @@ static int __devexit lm3530_remove(struct i2c_client *client)
 		regulator_disable(drvdata->regulator);
 	regulator_put(drvdata->regulator);
 	led_classdev_unregister(&drvdata->led_dev);
-	kfree(drvdata);
 	return 0;
 }