linuxmsm/laptops-kernel
0
0
Fork 0
mirror of https://github.com/linux-msm/laptops-kernel.git synced 2026-08-13 14:19:53 -07:00
Code Issues Packages Projects Releases Wiki Activity

PCI: exynos: Split into Synopsys part and Exynos part

Browse Source 
Exynos PCIe IP consists of Synopsys specific part and Exynos
specific part. Only core block is a Synopsys Designware part;
other parts are Exynos specific.

Also, the Synopsys Designware part can be shared with other
platforms; thus, it can be split two parts such as Synopsys
Designware part and Exynos specific part.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
This commit is contained in:
Jingoo Han
2013-08-12 12:18:20 -06:00
committed by Bjorn Helgaas
parent 5477a33b51
commit 4b1ced841b
6 changed files with 1000 additions and 866 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/devicetree/bindings/pci/designware-pcie.txt
+3
View File
@@ -18,6 +18,7 @@ Required properties:
- interrupt-map-mask and interrupt-map: standard PCI properties
to define the mapping of the PCIe interface to interrupt
numbers.
- num-lanes: number of lanes to use
- reset-gpio: gpio pin number of power good signal
Example:
@@ -41,6 +42,7 @@ SoC specific DT Entry:
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 53>;
num-lanes = <4>;
};
pcie@2a0000 {
@@ -60,6 +62,7 @@ SoC specific DT Entry:
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 56>;
num-lanes = <4>;
};
Board specific DT Entry:
arch/arm/boot/dts/exynos5440.dtsi
+2
View File
@@ -248,6 +248,7 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 53>;
num-lanes = <4>;
};
pcie@2a0000 {
@@ -267,5 +268,6 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 56>;
num-lanes = <4>;
};
};
drivers/pci/host/Makefile
+2 -1
View File
@@ -1,2 +1,3 @@
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
drivers/pci/host/pci-exynos.c
+530
View File
File diff suppressed because it is too large Load Diff
drivers/pci/host/pcie-designware.c
+398 -865
View File
File diff suppressed because it is too large Load Diff
drivers/pci/host/pcie-designware.h
+65
View File
@@ -0,0 +1,65 @@
/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct pcie_port_info {
u32 cfg0_size;
u32 cfg1_size;
u32 io_size;
u32 mem_size;
phys_addr_t io_bus_addr;
phys_addr_t mem_bus_addr;
};
struct pcie_port {
struct device *dev;
u8 root_bus_nr;
void __iomem *dbi_base;
u64 cfg0_base;
void __iomem *va_cfg0_base;
u64 cfg1_base;
void __iomem *va_cfg1_base;
u64 io_base;
u64 mem_base;
spinlock_t conf_lock;
struct resource cfg;
struct resource io;
struct resource mem;
struct pcie_port_info config;
int irq;
u32 lanes;
struct pcie_host_ops *ops;
};
struct pcie_host_ops {
void (*readl_rc)(struct pcie_port *pp,
void __iomem *dbi_base, u32 *val);
void (*writel_rc)(struct pcie_port *pp,
u32 val, void __iomem *dbi_base);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
void (*host_init)(struct pcie_port *pp);
};
extern unsigned long global_io_offset;
int cfg_read(void __iomem *addr, int where, int size, u32 *val);
int cfg_write(void __iomem *addr, int where, int size, u32 val);
int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, u32 val);
int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
int dw_pcie_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys);
int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);