Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits)
  uio: make uio_info's name and version const
  UIO: Documentation for UIO ioport info handling
  UIO: Pass information about ioports to userspace (V2)
  UIO: uio_pdrv_genirq: allow custom irq_flags
  UIO: use pci_ioremap_bar() in drivers/uio
  arm: struct device - replace bus_id with dev_name(), dev_set_name()
  libata: struct device - replace bus_id with dev_name(), dev_set_name()
  avr: struct device - replace bus_id with dev_name(), dev_set_name()
  block: struct device - replace bus_id with dev_name(), dev_set_name()
  chris: struct device - replace bus_id with dev_name(), dev_set_name()
  dmi: struct device - replace bus_id with dev_name(), dev_set_name()
  gadget: struct device - replace bus_id with dev_name(), dev_set_name()
  gpio: struct device - replace bus_id with dev_name(), dev_set_name()
  gpu: struct device - replace bus_id with dev_name(), dev_set_name()
  hwmon: struct device - replace bus_id with dev_name(), dev_set_name()
  i2o: struct device - replace bus_id with dev_name(), dev_set_name()
  IA64: struct device - replace bus_id with dev_name(), dev_set_name()
  i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name()
  infiniband: struct device - replace bus_id with dev_name(), dev_set_name()
  ISDN: struct device - replace bus_id with dev_name(), dev_set_name()
  ...

Documentation/DocBook/uio-howto.tmpl

@@ -41,6 +41,12 @@ GPL version 2.
 </abstract>
 
 <revhistory>
+	<revision>
+	<revnumber>0.6</revnumber>
+	<date>2008-12-05</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added description of portio sysfs attributes.</revremark>
+	</revision>
 	<revision>
 	<revnumber>0.5</revnumber>
 	<date>2008-05-22</date>
@@ -318,6 +324,54 @@ interested in translating it, please email me
 offset = N * getpagesize();
 </programlisting>
 
+<para>
+	Sometimes there is hardware with memory-like regions that can not be
+	mapped with the technique described here, but there are still ways to
+	access them from userspace. The most common example are x86 ioports.
+	On x86 systems, userspace can access these ioports using
+	<function>ioperm()</function>, <function>iopl()</function>,
+	<function>inb()</function>, <function>outb()</function>, and similar
+	functions.
+</para>
+<para>
+	Since these ioport regions can not be mapped, they will not appear under
+	<filename>/sys/class/uio/uioX/maps/</filename> like the normal memory
+	described above. Without information about the port regions a hardware
+	has to offer, it becomes difficult for the userspace part of the
+	driver to find out which ports belong to which UIO device.
+</para>
+<para>
+	To address this situation, the new directory
+	<filename>/sys/class/uio/uioX/portio/</filename> was added. It only
+	exists if the driver wants to pass information about one or more port
+	regions to userspace. If that is the case, subdirectories named
+	<filename>port0</filename>, <filename>port1</filename>, and so on,
+	will appear underneath
+	<filename>/sys/class/uio/uioX/portio/</filename>.
+</para>
+<para>
+	Each <filename>portX/</filename> directory contains three read-only
+	files that show start, size, and type of the port region:
+</para>
+<itemizedlist>
+<listitem>
+	<para>
+	<filename>start</filename>: The first port of this region.
+	</para>
+</listitem>
+<listitem>
+	<para>
+	<filename>size</filename>: The number of ports in this region.
+	</para>
+</listitem>
+<listitem>
+	<para>
+	<filename>porttype</filename>: A string describing the type of port.
+	</para>
+</listitem>
+</itemizedlist>
+
+
 </sect1>
 </chapter>
 
@@ -339,12 +393,12 @@ offset = N * getpagesize();
 
 <itemizedlist>
 <listitem><para>
-<varname>char *name</varname>: Required. The name of your driver as
+<varname>const char *name</varname>: Required. The name of your driver as
 it will appear in sysfs. I recommend using the name of your module for this.
 </para></listitem>
 
 <listitem><para>
-<varname>char *version</varname>: Required. This string appears in
+<varname>const char *version</varname>: Required. This string appears in
 <filename>/sys/class/uio/uioX/version</filename>.
 </para></listitem>
 
@@ -355,6 +409,13 @@ mapping you need to fill one of the <varname>uio_mem</varname> structures.
 See the description below for details.
 </para></listitem>
 
+<listitem><para>
+<varname>struct uio_port port[ MAX_UIO_PORTS_REGIONS ]</varname>: Required
+if you want to pass information about ioports to userspace. For each port
+region you need to fill one of the <varname>uio_port</varname> structures.
+See the description below for details.
+</para></listitem>
+
 <listitem><para>
 <varname>long irq</varname>: Required. If your hardware generates an
 interrupt, it's your modules task to determine the irq number during
@@ -448,6 +509,42 @@ Please do not touch the <varname>kobj</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>
+
+<para>
+Sometimes, your device can have one or more port regions which can not be
+mapped to userspace. But if there are other possibilities for userspace to
+access these ports, it makes sense to make information about the ports
+available in sysfs. For each region, you have to set up a
+<varname>struct uio_port</varname> in the <varname>port[]</varname> array.
+Here's a description of the fields of <varname>struct uio_port</varname>:
+</para>
+
+<itemizedlist>
+<listitem><para>
+<varname>char *porttype</varname>: Required. Set this to one of the predefined
+constants. Use <varname>UIO_PORT_X86</varname> for the ioports found in x86
+architectures.
+</para></listitem>
+
+<listitem><para>
+<varname>unsigned long start</varname>: Required if the port region is used.
+Fill in the number of the first port of this region.
+</para></listitem>
+
+<listitem><para>
+<varname>unsigned long size</varname>: Fill in the number of ports in this
+region. If <varname>size</varname> is zero, the region is considered unused.
+Note that you <emphasis>must</emphasis> initialize <varname>size</varname>
+with zero for all unused regions.
+</para></listitem>
+</itemizedlist>
+
+<para>
+Please do not touch the <varname>portio</varname> element of
+<varname>struct uio_port</varname>! It is used internally by the UIO
+framework to set up sysfs files for this region. Simply leave it alone.
+</para>
+
 </sect1>
 
 <sect1 id="adding_irq_handler">

Documentation/kobject.txt

@@ -118,8 +118,8 @@ the name of the kobject, call kobject_rename():
 
     int kobject_rename(struct kobject *kobj, const char *new_name);
 
-Note kobject_rename does perform any locking or have a solid notion of
-what names are valid so the provide must provide their own sanity checking
+kobject_rename does not perform any locking or have a solid notion of
+what names are valid so the caller must provide their own sanity checking
 and serialization.
 
 There is a function called kobject_set_name() but that is legacy cruft and

arch/arm/kernel/ecard.c

@@ -817,7 +817,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	ec->dma = NO_DMA;
 	ec->ops = &ecard_default_ops;
 
-	snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
+	dev_set_name(&ec->dev, "ecard%d", slot);
 	ec->dev.parent = NULL;
 	ec->dev.bus = &ecard_bus_type;
 	ec->dev.dma_mask = &ec->dma_mask;

arch/arm/mach-aaec2000/core.c

@@ -212,7 +212,7 @@ static struct clcd_board clcd_plat_data = {
 
 static struct amba_device clcd_device = {
 	.dev		= {
-		.bus_id			= "mb:16",
+		.init_name		= "mb:16",
 		.coherent_dma_mask	= ~0,
 		.platform_data		= &clcd_plat_data,
 	},

arch/arm/mach-ep93xx/core.c

@@ -409,7 +409,7 @@ static struct amba_pl010_data ep93xx_uart_data = {
 
 static struct amba_device uart1_device = {
 	.dev		= {
-		.bus_id		= "apb:uart1",
+		.init_name	= "apb:uart1",
 		.platform_data	= &ep93xx_uart_data,
 	},
 	.res		= {
@@ -423,7 +423,7 @@ static struct amba_device uart1_device = {
 
 static struct amba_device uart2_device = {
 	.dev		= {
-		.bus_id		= "apb:uart2",
+		.init_name	= "apb:uart2",
 		.platform_data	= &ep93xx_uart_data,
 	},
 	.res		= {
@@ -437,7 +437,7 @@ static struct amba_device uart2_device = {
 
 static struct amba_device uart3_device = {
 	.dev		= {
-		.bus_id		= "apb:uart3",
+		.init_name	= "apb:uart3",
 		.platform_data	= &ep93xx_uart_data,
 	},
 	.res		= {

arch/arm/mach-integrator/core.c

@@ -37,7 +37,7 @@ static struct amba_pl010_data integrator_uart_data;
 
 static struct amba_device rtc_device = {
 	.dev		= {
-		.bus_id	= "mb:15",
+		.init_name = "mb:15",
 	},
 	.res		= {
 		.start	= INTEGRATOR_RTC_BASE,
@@ -50,7 +50,7 @@ static struct amba_device rtc_device = {
 
 static struct amba_device uart0_device = {
 	.dev		= {
-		.bus_id	= "mb:16",
+		.init_name = "mb:16",
 		.platform_data = &integrator_uart_data,
 	},
 	.res		= {
@@ -64,7 +64,7 @@ static struct amba_device uart0_device = {
 
 static struct amba_device uart1_device = {
 	.dev		= {
-		.bus_id	= "mb:17",
+		.init_name = "mb:17",
 		.platform_data = &integrator_uart_data,
 	},
 	.res		= {
@@ -78,7 +78,7 @@ static struct amba_device uart1_device = {
 
 static struct amba_device kmi0_device = {
 	.dev		= {
-		.bus_id	= "mb:18",
+		.init_name = "mb:18",
 	},
 	.res		= {
 		.start	= KMI0_BASE,
@@ -91,7 +91,7 @@ static struct amba_device kmi0_device = {
 
 static struct amba_device kmi1_device = {
 	.dev		= {
-		.bus_id	= "mb:19",
+		.init_name = "mb:19",
 	},
 	.res		= {
 		.start	= KMI1_BASE,

arch/arm/mach-integrator/integrator_cp.c

@@ -407,7 +407,7 @@ static struct mmc_platform_data mmc_data = {
 
 static struct amba_device mmc_device = {
 	.dev		= {
-		.bus_id	= "mb:1c",
+		.init_name = "mb:1c",
 		.platform_data = &mmc_data,
 	},
 	.res		= {
@@ -421,7 +421,7 @@ static struct amba_device mmc_device = {
 
 static struct amba_device aaci_device = {
 	.dev		= {
-		.bus_id	= "mb:1d",
+		.init_name = "mb:1d",
 	},
 	.res		= {
 		.start	= INTCP_PA_AACI_BASE,
@@ -532,7 +532,7 @@ static struct clcd_board clcd_data = {
 
 static struct amba_device clcd_device = {
 	.dev		= {
-		.bus_id	= "mb:c0",
+		.init_name = "mb:c0",
 		.coherent_dma_mask = ~0,
 		.platform_data = &clcd_data,
 	},

arch/arm/mach-lh7a40x/clcd.c

@@ -207,7 +207,7 @@ static struct clcd_board clcd_platform_data = {
 static struct amba_device name##_device = {			\
 	.dev = {						\
 		.coherent_dma_mask = ~0,			\
-		.bus_id	= busid,				\
+		.init_name = busid,				\
 		.platform_data = plat,				\
 		},						\
 	.res = {						\

arch/arm/mach-netx/fb.c

@@ -91,7 +91,7 @@ void clk_put(struct clk *clk)
 
 static struct amba_device fb_device = {
 	.dev		= {
-		.bus_id	= "fb",
+		.init_name = "fb",
 		.coherent_dma_mask = ~0,
 	},
 	.res		= {

arch/arm/mach-realview/core.h

@@ -31,7 +31,7 @@
 static struct amba_device name##_device = {			\
 	.dev		= {					\
 		.coherent_dma_mask = ~0,			\
-		.bus_id	= busid,				\
+		.init_name = busid,				\
 		.platform_data = plat,				\
 	},							\
 	.res		= {					\

arch/arm/mach-versatile/core.h

@@ -34,7 +34,7 @@ extern unsigned int mmc_status(struct device *dev);
 static struct amba_device name##_device = {			\
 	.dev		= {					\
 		.coherent_dma_mask = ~0,			\
-		.bus_id	= busid,				\
+		.init_name = busid,				\
 		.platform_data = plat,				\
 	},							\
 	.res		= {					\

arch/arm/plat-omap/include/mach/memory.h

@@ -59,7 +59,7 @@
 
 #define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
 
 #define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
 					(dma_addr_t)virt_to_lbus(page_address(page)) : \

arch/avr32/mach-at32ap/clock.c

@@ -198,7 +198,7 @@ dump_clock(struct clk *parent, struct clkinf *r)
 	unsigned	i;
 
 	/* skip clocks coupled to devices that aren't registered */
-	if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
+	if (parent->dev && !dev_name(parent->dev) && !parent->users)
 		return;
 
 	/* <nest spaces> name <pad to end> */
@@ -214,7 +214,7 @@ dump_clock(struct clk *parent, struct clkinf *r)
 		parent->users ? "on" : "off",	/* NOTE: not-paranoid!! */
 		clk_get_rate(parent));
 	if (parent->dev)
-		seq_printf(r->s, ", for %s", parent->dev->bus_id);
+		seq_printf(r->s, ", for %s", dev_name(parent->dev));
 	seq_printf(r->s, "\n");
 
 	/* cost of this scan is small, but not linear... */

arch/cris/arch-v32/drivers/iop_fw_load.c

@@ -24,12 +24,12 @@
 #error "Please contact <greg@kroah.com> for details on how to fix it properly."
 
 static struct device iop_spu_device[2] = {
-	{ .bus_id =     "iop-spu0", },
-	{ .bus_id =     "iop-spu1", },
+	{ .init_name =     "iop-spu0", },
+	{ .init_name =     "iop-spu1", },
 };
 
 static struct device iop_mpu_device = {
-	.bus_id =       "iop-mpu",
+	.init_name =       "iop-mpu",
 };
 
 static int wait_mpu_idle(void)

arch/ia64/kernel/pci-dma.c

@@ -39,7 +39,7 @@ int iommu_detected __read_mostly;
    be probably a smaller DMA mask, but this is bug-to-bug compatible
    to i386. */
 struct device fallback_dev = {
-	.bus_id = "fallback device",
+	.init_name = "fallback device",
 	.coherent_dma_mask = DMA_32BIT_MASK,
 	.dma_mask = &fallback_dev.coherent_dma_mask,
 };

arch/ia64/sn/kernel/tiocx.c

@@ -206,8 +206,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->dev.parent = NULL;
 	cx_dev->dev.bus = &tiocx_bus_type;
 	cx_dev->dev.release = tiocx_bus_release;
-	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d",
-		 cx_dev->cx_id.nasid);
+	dev_set_name(&cx_dev->dev, "%d", cx_dev->cx_id.nasid);
 	device_register(&cx_dev->dev);
 	get_device(&cx_dev->dev);
 

arch/mips/kernel/vpe.c

@@ -1454,7 +1454,7 @@ static int __init vpe_module_init(void)
 	device_initialize(&vpe_device);
 	vpe_device.class	= &vpe_class,
 	vpe_device.parent	= NULL,
-	strlcpy(vpe_device.bus_id, "vpe1", BUS_ID_SIZE);
+	dev_set_name(&vpe_device, "vpe1");
 	vpe_device.devt = MKDEV(major, minor);
 	err = device_add(&vpe_device);
 	if (err) {

arch/s390/include/asm/s390_rdev.h

@@ -1,15 +0,0 @@
-/*
- *  include/asm-s390/ccwdev.h
- *
- *    Copyright (C) 2002,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
- *               Carsten Otte  <cotte@de.ibm.com>
- *
- *  Interface for s390 root device
- */
-
-#ifndef _S390_RDEV_H_
-#define _S390_RDEV_H_
-extern struct device *s390_root_dev_register(const char *);
-extern void s390_root_dev_unregister(struct device *);
-#endif /* _S390_RDEV_H_ */

block/bsg.c

@@ -42,7 +42,7 @@ struct bsg_device {
 	int done_cmds;
 	wait_queue_head_t wq_done;
 	wait_queue_head_t wq_free;
-	char name[BUS_ID_SIZE];
+	char name[20];
 	int max_queue;
 	unsigned long flags;
 };
@@ -781,7 +781,7 @@ static struct bsg_device *bsg_add_device(struct inode *inode,
 	mutex_lock(&bsg_mutex);
 	hlist_add_head(&bd->dev_list, bsg_dev_idx_hash(iminor(inode)));
 
-	strncpy(bd->name, rq->bsg_dev.class_dev->bus_id, sizeof(bd->name) - 1);
+	strncpy(bd->name, dev_name(rq->bsg_dev.class_dev), sizeof(bd->name) - 1);
 	dprintk("bound to <%s>, max queue %d\n",
 		format_dev_t(buf, inode->i_rdev), bd->max_queue);
 
@@ -992,7 +992,7 @@ int bsg_register_queue(struct request_queue *q, struct device *parent,
 	if (name)
 		devname = name;
 	else
-		devname = parent->bus_id;
+		devname = dev_name(parent);
 
 	/*
 	 * we need a proper transport to send commands, not a stacked device

block/genhd.c

@@ -1084,7 +1084,7 @@ dev_t blk_lookup_devt(const char *name, int partno)
 		struct gendisk *disk = dev_to_disk(dev);
 		struct hd_struct *part;
 
-		if (strcmp(dev->bus_id, name))
+		if (strcmp(dev_name(dev), name))
 			continue;
 
 		part = disk_get_part(disk, partno);