Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
  [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
  i.MX31: Disable CPU_32v6K in mx3_defconfig.
  mx3fb: Fix compilation with CONFIG_PM
  mx27ads: move PBC mapping out of vmalloc space
  MXC: remove BUG_ON in interrupt handler
  mx31: remove mx31moboard_defconfig
  ARM: ARCH_MXC should select HAVE_CLK
  mxc : BUG in imx_dma_request
  mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
  [ARM] mv78xx0: update defconfig
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kconfig typo fix:  "PXA930" -> "CPU_PXA930".
  [ARM] S3C2412: Add missing cache flush in suspend code
  [ARM] S3C: Add UDIVSLOT support for newer UARTS
  [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>

arch/arm/Kconfig

@@ -454,6 +454,7 @@ config ARCH_MXC
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 

arch/arm/configs/kirkwood_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar  3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 11:58:57 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -237,6 +241,7 @@ CONFIG_AEABI=y
 CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -293,7 +300,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 
 #
@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/mx3_defconfig

@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y

arch/arm/include/asm/elf.h

@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
 #define EF_ARM_HASENTRY		0x00000002	/* All */
 #define EF_ARM_RELEXEC		0x00000001	/* All */
 
-#define R_ARM_NONE	0
-#define R_ARM_PC24	1
-#define R_ARM_ABS32	2
-#define R_ARM_CALL	28
-#define R_ARM_JUMP24	29
-#define R_ARM_V4BX	40
-#define R_ARM_PREL31	42
+#define R_ARM_NONE		0
+#define R_ARM_PC24		1
+#define R_ARM_ABS32		2
+#define R_ARM_CALL		28
+#define R_ARM_JUMP24		29
+#define R_ARM_V4BX		40
+#define R_ARM_PREL31		42
+#define R_ARM_MOVW_ABS_NC	43
+#define R_ARM_MOVT_ABS		44
 
 /*
  * These are used to set parameters in the core dumps.

arch/arm/kernel/module.c

@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = offset & 0x7fffffff;
 			break;
 
+		case R_ARM_MOVW_ABS_NC:
+		case R_ARM_MOVT_ABS:
+			offset = *(u32 *)loc;
+			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+			offset = (offset ^ 0x8000) - 0x8000;
+
+			offset += sym->st_value;
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u32 *)loc &= 0xfff0f000;
+			*(u32 *)loc |= ((offset & 0xf000) << 4) |
+					(offset & 0x0fff);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -211,7 +211,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_32BIT_MASK;
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -220,7 +220,7 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 	},
 };
 

arch/arm/mach-pxa/Kconfig

@@ -289,12 +289,12 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"

arch/arm/mach-s3c2412/pm.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/cacheflush.h>
 #include <asm/irq.h>
 
 #include <mach/regs-power.h>
@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
 {
 	unsigned long tmp;
 
+	flush_cache_all();
+
 	/* set our standby method to sleep */
 
 	tmp = __raw_readl(S3C2412_PWRCFG);

arch/arm/mach-s3c6400/include/mach/map.h

@@ -40,6 +40,8 @@
 
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)

arch/arm/plat-mxc/dma-mx1-mx2.c

@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
 		local_irq_restore(flags);
 		return -EBUSY;
 	}
+	memset(imxdma, 0, sizeof(imxdma));
+	imxdma->name = name;
+	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
 	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
 			NULL);
 	if (ret) {
-		local_irq_restore(flags);
+		imxdma->name = NULL;
 		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
 				MXC_INT_DMACH0 + channel, channel);
 		return ret;
@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
 	imxdma->watchdog.data = channel;
 #endif
 
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-
-	local_irq_restore(flags);
 	return ret;
 }
 EXPORT_SYMBOL(imx_dma_request);
@@ -737,10 +733,7 @@ void imx_dma_free(int channel)
 
 	local_irq_save(flags);
 	/* Disable interrupts */
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dma_disable(channel);
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2

arch/arm/plat-mxc/gpio.c

@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	irq_stat = __raw_readl(port->base + GPIO_ISR) &
 			__raw_readl(port->base + GPIO_IMR);
-	BUG_ON(!irq_stat);
+
 	mxc_gpio_irq_handler(port, irq_stat);
 }
 #endif

arch/arm/plat-mxc/include/mach/board-mx27ads.h

@@ -47,7 +47,7 @@
 /*
  * Base address of PBC controller, CS4
  */
-#define PBC_BASE_ADDRESS        0xEB000000
+#define PBC_BASE_ADDRESS        0xf4300000
 #define PBC_REG_ADDR(offset)    (void __force __iomem *) \
 		(PBC_BASE_ADDRESS + (offset))
 

drivers/serial/s3c6400.c

@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = {
 	.name		= "Samsung S3C6400 UART",
 	.type		= PORT_S3C6400,
 	.fifosize	= 64,
+	.has_divslot	= 1,
 	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
 	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,

drivers/serial/samsung.c

@@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
 struct baud_calc {
 	struct s3c24xx_uart_clksrc	*clksrc;
 	unsigned int			 calc;
+	unsigned int			 divslot;
 	unsigned int			 quot;
 	struct clk			*src;
 };
@@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
 				   struct s3c24xx_uart_clksrc *clksrc,
 				   unsigned int baud)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	unsigned long rate;
 
 	calc->src = clk_get(port->dev, clksrc->name);
@@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
 	rate /= clksrc->divisor;
 
 	calc->clksrc = clksrc;
-	calc->quot = (rate + (8 * baud)) / (16 * baud);
-	calc->calc = (rate / (calc->quot * 16));
+
+	if (ourport->info->has_divslot) {
+		unsigned long div = rate / baud;
+
+		/* The UDIVSLOT register on the newer UARTs allows us to
+		 * get a divisor adjustment of 1/16th on the baud clock.
+		 *
+		 * We don't keep the UDIVSLOT value (the 16ths we calculated
+		 * by not multiplying the baud by 16) as it is easy enough
+		 * to recalculate.
+		 */
+
+		calc->quot = div / 16;
+		calc->calc = rate / div;
+	} else {
+		calc->quot = (rate + (8 * baud)) / (16 * baud);
+		calc->calc = (rate / (calc->quot * 16));
+	}
 
 	calc->quot--;
 	return 1;
@@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
 	return best->quot;
 }
 
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+	[0] = 0x0000,
+	[1] = 0x0080,
+	[2] = 0x0808,
+	[3] = 0x0888,
+	[4] = 0x2222,
+	[5] = 0x4924,
+	[6] = 0x4A52,
+	[7] = 0x54AA,
+	[8] = 0x5555,
+	[9] = 0xD555,
+	[10] = 0xD5D5,
+	[11] = 0xDDD5,
+	[12] = 0xDDDD,
+	[13] = 0xDFDD,
+	[14] = 0xDFDF,
+	[15] = 0xFFDF,
+};
+
 static void s3c24xx_serial_set_termios(struct uart_port *port,
 				       struct ktermios *termios,
 				       struct ktermios *old)
@@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	unsigned int baud, quot;
 	unsigned int ulcon;
 	unsigned int umcon;
+	unsigned int udivslot = 0;
 
 	/*
 	 * We don't support modem control lines.
@@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	/* check to see if we need  to change clock source */
 
 	if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+		dbg("selecting clock %p\n", clk);
 		s3c24xx_serial_setsource(port, clksrc);
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
@@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
 
+	if (ourport->info->has_divslot) {
+		unsigned int div = ourport->baudclk_rate / baud;
+
+		udivslot = udivslot_table[div & 15];
+		dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+	}
+
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
 		dbg("config: 5bits/char\n");
@@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+	dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+	    ulcon, quot, udivslot);
 
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
 	wr_regl(port, S3C2410_UMCON, umcon);
 
+	if (ourport->info->has_divslot)
+		wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
 	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
 	    rd_regl(port, S3C2410_ULCON),
 	    rd_regl(port, S3C2410_UCON),

drivers/serial/samsung.h

@@ -21,6 +21,10 @@ struct s3c24xx_uart_info {
 	unsigned long		tx_fifoshift;
 	unsigned long		tx_fifofull;
 
+	/* uart port features */
+
+	unsigned int		has_divslot:1;
+
 	/* clock source control */
 
 	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);

drivers/video/mx3fb.c

@@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = {
  */
 static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-	struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
 
 	acquire_console_sem();
-	fb_set_suspend(drv_data->fbi, 1);
+	fb_set_suspend(mx3fb->fbi, 1);
 	release_console_sem();
 
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
@@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
  */
 static int mx3fb_resume(struct platform_device *pdev)
 {
-	struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-	struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
 
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
 		sdc_enable_channel(mx3_fbi);
-		sdc_set_brightness(mx3fb, drv_data->backlight_level);
+		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
 	}
 
 	acquire_console_sem();
-	fb_set_suspend(drv_data->fbi, 0);
+	fb_set_suspend(mx3fb->fbi, 0);
 	release_console_sem();
 
 	return 0;