powerpc: Fix typos

Fix typos, most reported by "codespell arch/powerpc".  Only touches
comments, no code changes.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240103231605.1801364-8-helgaas@kernel.org

arch/powerpc/boot/Makefile

@@ -108,8 +108,8 @@ DTC_FLAGS	?= -p 1024
 # these files into the build dir, fix up any includes and ensure that dependent
 # files are copied in the right order.
 
-# these need to be seperate variables because they are copied out of different
-# directories in the kernel tree. Sure you COULd merge them, but it's a
+# these need to be separate variables because they are copied out of different
+# directories in the kernel tree. Sure you COULD merge them, but it's a
 # cure-is-worse-than-disease situation.
 zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c
 zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c

arch/powerpc/boot/dts/acadia.dts

@@ -172,7 +172,7 @@
 				reg = <0xef602800 0x60>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x4 0x4>;
-				/* This thing is a bit weird.  It has it's own UIC
+				/* This thing is a bit weird.  It has its own UIC
 				 * that it uses to generate snapshot triggers.  We
 				 * don't really support this device yet, and it needs
 				 * work to figure this out.

arch/powerpc/boot/main.c

@@ -188,7 +188,7 @@ static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { }
 
 /* A buffer that may be edited by tools operating on a zImage binary so as to
  * edit the command line passed to vmlinux (by setting /chosen/bootargs).
- * The buffer is put in it's own section so that tools may locate it easier.
+ * The buffer is put in its own section so that tools may locate it easier.
  */
 static char cmdline[BOOT_COMMAND_LINE_SIZE]
 	__attribute__((__section__("__builtin_cmdline")));

arch/powerpc/boot/ps3.c

@@ -25,7 +25,7 @@ BSS_STACK(4096);
 
 /* A buffer that may be edited by tools operating on a zImage binary so as to
  * edit the command line passed to vmlinux (by setting /chosen/bootargs).
- * The buffer is put in it's own section so that tools may locate it easier.
+ * The buffer is put in its own section so that tools may locate it easier.
  */
 
 static char cmdline[BOOT_COMMAND_LINE_SIZE]

arch/powerpc/include/asm/io.h

@@ -982,7 +982,7 @@ static inline phys_addr_t page_to_phys(struct page *page)
 }
 
 /*
- * 32 bits still uses virt_to_bus() for it's implementation of DMA
+ * 32 bits still uses virt_to_bus() for its implementation of DMA
  * mappings se we have to keep it defined here. We also have some old
  * drivers (shame shame shame) that use bus_to_virt() and haven't been
  * fixed yet so I need to define it here.

arch/powerpc/include/asm/opal-api.h

@@ -1027,10 +1027,10 @@ struct opal_i2c_request {
  * The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX
  * with individual elements being 16 bits wide to fetch the system
  * wide EPOW status. Each element in the buffer will contain the
- * EPOW status in it's bit representation for a particular EPOW sub
+ * EPOW status in its bit representation for a particular EPOW sub
  * class as defined here. So multiple detailed EPOW status bits
  * specific for any sub class can be represented in a single buffer
- * element as it's bit representation.
+ * element as its bit representation.
  */
 
 /* System EPOW type */

arch/powerpc/include/asm/pmac_feature.h

@@ -192,7 +192,7 @@ static inline long pmac_call_feature(int selector, struct device_node* node,
 
 /* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
  * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
- * it's reset line
+ * its reset line
  */
 #define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)
 

arch/powerpc/include/asm/uninorth.h

@@ -144,7 +144,7 @@
 #define UNI_N_HWINIT_STATE_SLEEPING	0x01
 #define UNI_N_HWINIT_STATE_RUNNING	0x02
 /* This last bit appear to be used by the bootROM to know the second
- * CPU has started and will enter it's sleep loop with IP=0
+ * CPU has started and will enter its sleep loop with IP=0
  */
 #define UNI_N_HWINIT_STATE_CPU1_FLAG	0x10000000
 

arch/powerpc/include/uapi/asm/bootx.h

@@ -108,7 +108,7 @@ typedef struct boot_infos
     /* ALL BELOW NEW (vers. 4) */
 
     /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
-       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+       (non-PCI) only. On PCI, memory is contiguous and its size is in the
        device-tree. */
     boot_info_map_entry_t
     	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */

arch/powerpc/kernel/eeh_pe.c

@@ -527,7 +527,7 @@ EXPORT_SYMBOL_GPL(eeh_pe_state_mark);
  * eeh_pe_mark_isolated
  * @pe: EEH PE
  *
- * Record that a PE has been isolated by marking the PE and it's children as
+ * Record that a PE has been isolated by marking the PE and its children as
  * EEH_PE_ISOLATED (and EEH_PE_CFG_BLOCKED, if required) and their PCI devices
  * as pci_channel_io_frozen.
  */

arch/powerpc/kernel/fadump.c

@@ -681,7 +681,7 @@ void crash_fadump(struct pt_regs *regs, const char *str)
 	 * old_cpu == -1 means this is the first CPU which has come here,
 	 * go ahead and trigger fadump.
 	 *
-	 * old_cpu != -1 means some other CPU has already on it's way
+	 * old_cpu != -1 means some other CPU has already on its way
 	 * to trigger fadump, just keep looping here.
 	 */
 	this_cpu = smp_processor_id();

arch/powerpc/kernel/misc_64.S

@@ -192,7 +192,7 @@ _GLOBAL(scom970_read)
 	xori	r0,r0,MSR_EE
 	mtmsrd	r0,1
 
-	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+	/* rotate 24 bits SCOM address 8 bits left and mask out its low 8 bits
 	 * (including parity). On current CPUs they must be 0'd,
 	 * and finally or in RW bit
 	 */
@@ -226,7 +226,7 @@ _GLOBAL(scom970_write)
 	xori	r0,r0,MSR_EE
 	mtmsrd	r0,1
 
-	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+	/* rotate 24 bits SCOM address 8 bits left and mask out its low 8 bits
 	 * (including parity). On current CPUs they must be 0'd.
 	 */
 

arch/powerpc/kernel/process.c

@@ -1661,7 +1661,7 @@ void arch_setup_new_exec(void)
  * cases will happen:
  *
  * 1. The correct thread is running, the wrong thread is not
- * In this situation, the correct thread is woken and proceeds to pass it's
+ * In this situation, the correct thread is woken and proceeds to pass its
  * condition check.
  *
  * 2. Neither threads are running
@@ -1671,15 +1671,15 @@ void arch_setup_new_exec(void)
  * for the wrong thread, or they will execute the condition check immediately.
  *
  * 3. The wrong thread is running, the correct thread is not
- * The wrong thread will be woken, but will fail it's condition check and
+ * The wrong thread will be woken, but will fail its condition check and
  * re-execute wait. The correct thread, when scheduled, will execute either
- * it's condition check (which will pass), or wait, which returns immediately
- * when called the first time after the thread is scheduled, followed by it's
+ * its condition check (which will pass), or wait, which returns immediately
+ * when called the first time after the thread is scheduled, followed by its
  * condition check (which will pass).
  *
  * 4. Both threads are running
- * Both threads will be woken. The wrong thread will fail it's condition check
- * and execute another wait, while the correct thread will pass it's condition
+ * Both threads will be woken. The wrong thread will fail its condition check
+ * and execute another wait, while the correct thread will pass its condition
  * check.
  *
  * @t: the task to set the thread ID for

arch/powerpc/kernel/ptrace/ptrace-tm.c

@@ -12,7 +12,7 @@ void flush_tmregs_to_thread(struct task_struct *tsk)
 {
 	/*
 	 * If task is not current, it will have been flushed already to
-	 * it's thread_struct during __switch_to().
+	 * its thread_struct during __switch_to().
 	 *
 	 * A reclaim flushes ALL the state or if not in TM save TM SPRs
 	 * in the appropriate thread structures from live.

arch/powerpc/kernel/smp.c

@@ -1567,7 +1567,7 @@ static void add_cpu_to_masks(int cpu)
 
 	/*
 	 * This CPU will not be in the online mask yet so we need to manually
-	 * add it to it's own thread sibling mask.
+	 * add it to its own thread sibling mask.
 	 */
 	map_cpu_to_node(cpu, cpu_to_node(cpu));
 	cpumask_set_cpu(cpu, cpu_sibling_mask(cpu));

arch/powerpc/kernel/sysfs.c

@@ -139,7 +139,7 @@ static unsigned long dscr_default;
  * @val:	Returned cpu specific DSCR default value
  *
  * This function returns the per cpu DSCR default value
- * for any cpu which is contained in it's PACA structure.
+ * for any cpu which is contained in its PACA structure.
  */
 static void read_dscr(void *val)
 {
@@ -152,7 +152,7 @@ static void read_dscr(void *val)
  * @val:	New cpu specific DSCR default value to update
  *
  * This function updates the per cpu DSCR default value
- * for any cpu which is contained in it's PACA structure.
+ * for any cpu which is contained in its PACA structure.
  */
 static void write_dscr(void *val)
 {

arch/powerpc/kvm/book3s_xive.c

@@ -531,7 +531,7 @@ static int xive_vm_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr)
 	xc->cppr = xive_prio_from_guest(new_cppr);
 
 	/*
-	 * IPIs are synthetized from MFRR and thus don't need
+	 * IPIs are synthesized from MFRR and thus don't need
 	 * any special EOI handling. The underlying interrupt
 	 * used to signal MFRR changes is EOId when fetched from
 	 * the queue.

arch/powerpc/mm/cacheflush.c

@@ -78,7 +78,7 @@ EXPORT_SYMBOL(flush_icache_range);
 
 #ifdef CONFIG_HIGHMEM
 /**
- * flush_dcache_icache_phys() - Flush a page by it's physical address
+ * flush_dcache_icache_phys() - Flush a page by its physical address
  * @physaddr: the physical address of the page
  */
 static void flush_dcache_icache_phys(unsigned long physaddr)

arch/powerpc/mm/nohash/kaslr_booke.c

@@ -376,7 +376,7 @@ notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size)
 		create_kaslr_tlb_entry(1, tlb_virt, tlb_phys);
 	}
 
-	/* Copy the kernel to it's new location and run */
+	/* Copy the kernel to its new location and run */
 	memcpy((void *)kernstart_virt_addr, (void *)_stext, kernel_sz);
 	flush_icache_range(kernstart_virt_addr, kernstart_virt_addr + kernel_sz);
 

arch/powerpc/platforms/512x/mpc512x_shared.c

@@ -279,7 +279,7 @@ static void __init mpc512x_setup_diu(void)
 	 * and so negatively affect boot time. Instead we reserve the
 	 * already configured frame buffer area so that it won't be
 	 * destroyed. The starting address of the area to reserve and
-	 * also it's length is passed to memblock_reserve(). It will be
+	 * also its length is passed to memblock_reserve(). It will be
 	 * freed later on first open of fbdev, when splash image is not
 	 * needed any more.
 	 */