Merge branch 'sched/urgent'

.mailmap

@@ -90,11 +90,16 @@ Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
 Frank Zago <fzago@systemfabricworks.com>
 Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
+Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
+Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
+Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
 Greg Kroah-Hartman <greg@echidna.(none)>
 Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>
+Heiko Carstens <hca@linux.ibm.com> <h.carstens@de.ibm.com>
+Heiko Carstens <hca@linux.ibm.com> <heiko.carstens@de.ibm.com>
 Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>

Documentation/admin-guide/README.rst

@@ -258,7 +258,7 @@ Configuring the kernel
 Compiling the kernel
 --------------------
 
- - Make sure you have at least gcc 4.6 available.
+ - Make sure you have at least gcc 4.9 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
    Please note that you can still run a.out user programs with this kernel.

Documentation/arm64/cpu-feature-registers.rst

@@ -171,6 +171,7 @@ infrastructure:
 
 
   3) ID_AA64PFR1_EL1 - Processor Feature Register 1
+
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+
@@ -181,6 +182,7 @@ infrastructure:
 
 
   4) MIDR_EL1 - Main ID Register
+
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+

Documentation/block/bfq-iosched.rst

@@ -492,13 +492,6 @@ set max_budget to higher values than those to which BFQ would have set
 it with auto-tuning. An alternative way to achieve this goal is to
 just increase the value of timeout_sync, leaving max_budget equal to 0.
 
-weights
--------
-
-Read-only parameter, used to show the weights of the currently active
-BFQ queues.
-
-
 4. Group scheduling with BFQ
 ============================
 
@@ -566,7 +559,7 @@ Parameters to set
 For each group, there is only the following parameter to set.
 
 weight (namely blkio.bfq.weight or io.bfq-weight): the weight of the
-group inside its parent. Available values: 1..10000 (default 100). The
+group inside its parent. Available values: 1..1000 (default 100). The
 linear mapping between ioprio and weights, described at the beginning
 of the tunable section, is still valid, but all weights higher than
 IOPRIO_BE_NR*10 are mapped to ioprio 0.

Documentation/core-api/dma-api.rst

@@ -204,6 +204,14 @@ Returns the maximum size of a mapping for the device. The size parameter
 of the mapping functions like dma_map_single(), dma_map_page() and
 others should not be larger than the returned value.
 
+::
+
+	bool
+	dma_need_sync(struct device *dev, dma_addr_t dma_addr);
+
+Returns %true if dma_sync_single_for_{device,cpu} calls are required to
+transfer memory ownership.  Returns %false if those calls can be skipped.
+
 ::
 
 	unsigned long

Documentation/filesystems/overlayfs.rst

@@ -560,8 +560,8 @@ When the NFS export feature is enabled, all directory index entries are
 verified on mount time to check that upper file handles are not stale.
 This verification may cause significant overhead in some cases.
 
-Note: the mount options index=off,nfs_export=on are conflicting and will
-result in an error.
+Note: the mount options index=off,nfs_export=on are conflicting for a
+read-write mount and will result in an error.
 
 
 Testsuite

Documentation/networking/arcnet.rst

@@ -434,7 +434,7 @@ can set up your network then:
 	ifconfig arc0 insight
 	route add insight arc0
 	route add freedom arc0	/* I would use the subnet here (like I said
-					to to in "single protocol" above),
+					to in "single protocol" above),
 					but the rest of the subnet
 					unfortunately lies across the PPP
 					link on freedom, which confuses

Documentation/networking/ax25.rst

@@ -6,7 +6,7 @@ AX.25
 
 To use the amateur radio protocols within Linux you will need to get a
 suitable copy of the AX.25 Utilities. More detailed information about
-AX.25, NET/ROM and ROSE, associated programs and and utilities can be
+AX.25, NET/ROM and ROSE, associated programs and utilities can be
 found on http://www.linux-ax25.org.
 
 There is an active mailing list for discussing Linux amateur radio matters

Documentation/networking/can_ucan_protocol.rst

@@ -144,7 +144,7 @@ UCAN_COMMAND_SET_BITTIMING
 
 *Host2Dev; mandatory*
 
-Setup bittiming by sending the the structure
+Setup bittiming by sending the structure
 ``ucan_ctl_payload_t.cmd_set_bittiming`` (see ``struct bittiming`` for
 details)
 
@@ -232,7 +232,7 @@ UCAN_IN_TX_COMPLETE
   zero
 
 The CAN device has sent a message to the CAN bus. It answers with a
-list of of tuples <echo-ids, flags>.
+list of tuples <echo-ids, flags>.
 
 The echo-id identifies the frame from (echos the id from a previous
 UCAN_OUT_TX message). The flag indicates the result of the

Documentation/networking/dsa/dsa.rst

@@ -95,7 +95,7 @@ Ethernet switch.
 Networking stack hooks
 ----------------------
 
-When a master netdev is used with DSA, a small hook is placed in in the
+When a master netdev is used with DSA, a small hook is placed in the
 networking stack is in order to have the DSA subsystem process the Ethernet
 switch specific tagging protocol. DSA accomplishes this by registering a
 specific (and fake) Ethernet type (later becoming ``skb->protocol``) with the

Documentation/networking/ip-sysctl.rst

@@ -741,7 +741,7 @@ tcp_fastopen - INTEGER
 
 	Default: 0x1
 
-	Note that that additional client or server features are only
+	Note that additional client or server features are only
 	effective if the basic support (0x1 and 0x2) are enabled respectively.
 
 tcp_fastopen_blackhole_timeout_sec - INTEGER

Documentation/networking/ipvs-sysctl.rst

@@ -114,7 +114,7 @@ drop_entry - INTEGER
 	modes (when there is no enough available memory, the strategy
 	is enabled and the variable is automatically set to 2,
 	otherwise the strategy is disabled and the variable is set to
-	1), and 3 means that that the strategy is always enabled.
+	1), and 3 means that the strategy is always enabled.
 
 drop_packet - INTEGER
 	- 0  - disabled (default)

Documentation/networking/rxrpc.rst

@@ -186,7 +186,7 @@ About the AF_RXRPC driver:
      time [tunable] after the last connection using it discarded, in case a new
      connection is made that could use it.
 
- (#) A client-side connection is only shared between calls if they have have
+ (#) A client-side connection is only shared between calls if they have
      the same key struct describing their security (and assuming the calls
      would otherwise share the connection).  Non-secured calls would also be
      able to share connections with each other.

Documentation/powerpc/vas-api.rst

@@ -213,7 +213,7 @@ request buffers are not in memory. The operating system handles the fault by
 updating CSB with the following data:
 
 	csb.flags = CSB_V;
-	csb.cc = CSB_CC_TRANSLATION;
+	csb.cc = CSB_CC_FAULT_ADDRESS;
 	csb.ce = CSB_CE_TERMINATION;
 	csb.address = fault_address;
 

Documentation/process/changes.rst

@@ -29,7 +29,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
         Program        Minimal version       Command to check the version
 ====================== ===============  ========================================
-GNU C                  4.8              gcc --version
+GNU C                  4.9              gcc --version
 GNU make               3.81             make --version
 binutils               2.23             ld -v
 flex                   2.5.35           flex --version

Documentation/process/coding-style.rst

@@ -319,6 +319,26 @@ If you are afraid to mix up your local variable names, you have another
 problem, which is called the function-growth-hormone-imbalance syndrome.
 See chapter 6 (Functions).
 
+For symbol names and documentation, avoid introducing new usage of
+'master / slave' (or 'slave' independent of 'master') and 'blacklist /
+whitelist'.
+
+Recommended replacements for 'master / slave' are:
+    '{primary,main} / {secondary,replica,subordinate}'
+    '{initiator,requester} / {target,responder}'
+    '{controller,host} / {device,worker,proxy}'
+    'leader / follower'
+    'director / performer'
+
+Recommended replacements for 'blacklist/whitelist' are:
+    'denylist / allowlist'
+    'blocklist / passlist'
+
+Exceptions for introducing new usage is to maintain a userspace ABI/API,
+or when updating code for an existing (as of 2020) hardware or protocol
+specification that mandates those terms. For new specifications
+translate specification usage of the terminology to the kernel coding
+standard where possible.
 
 5) Typedefs
 -----------

Documentation/virt/kvm/api.rst

@@ -4339,14 +4339,15 @@ Errors:
 #define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001
 
   struct kvm_vmx_nested_state_hdr {
-	__u32 flags;
 	__u64 vmxon_pa;
 	__u64 vmcs12_pa;
-	__u64 preemption_timer_deadline;
 
 	struct {
 		__u16 flags;
 	} smm;
+
+	__u32 flags;
+	__u64 preemption_timer_deadline;
   };
 
   struct kvm_vmx_nested_state_data {

MAINTAINERS

@@ -2929,6 +2929,7 @@ F:	include/uapi/linux/atm*
 
 ATMEL MACB ETHERNET DRIVER
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -3306,7 +3307,7 @@ X:	arch/riscv/net/bpf_jit_comp32.c
 
 BPF JIT for S390
 M:	Ilya Leoshkevich <iii@linux.ibm.com>
-M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
@@ -5021,7 +5022,6 @@ F:	drivers/mfd/da91??-*.c
 F:	drivers/pinctrl/pinctrl-da90??.c
 F:	drivers/power/supply/da9052-battery.c
 F:	drivers/power/supply/da91??-*.c
-F:	drivers/regulator/da903x.c
 F:	drivers/regulator/da9???-regulator.[ch]
 F:	drivers/regulator/slg51000-regulator.[ch]
 F:	drivers/rtc/rtc-da90??.c
@@ -5111,7 +5111,7 @@ M:	Vinod Koul <vkoul@kernel.org>
 L:	dmaengine@vger.kernel.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
-T:	git git://git.infradead.org/users/vkoul/slave-dma.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git
 F:	Documentation/devicetree/bindings/dma/
 F:	Documentation/driver-api/dmaengine/
 F:	drivers/dma/
@@ -14831,7 +14831,7 @@ S:	Maintained
 F:	drivers/video/fbdev/savage/
 
 S390
-M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
 L:	linux-s390@vger.kernel.org
@@ -14862,7 +14862,7 @@ F:	drivers/s390/block/dasd*
 F:	include/linux/dasd_mod.h
 
 S390 IOMMU (PCI)
-M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
+M:	Gerald Schaefer <gerald.schaefer@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -14890,7 +14890,7 @@ F:	drivers/s390/net/
 
 S390 PCI SUBSYSTEM
 M:	Niklas Schnelle <schnelle@linux.ibm.com>
-M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
+M:	Gerald Schaefer <gerald.schaefer@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -17513,7 +17513,7 @@ F:	Documentation/admin-guide/ufs.rst
 F:	fs/ufs/
 
 UHID USERSPACE HID IO DRIVER
-M:	David Herrmann <dh.herrmann@googlemail.com>
+M:	David Rheinsberg <david.rheinsberg@gmail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/uhid.c
@@ -18472,7 +18472,7 @@ S:	Maintained
 F:	drivers/rtc/rtc-sd3078.c
 
 WIIMOTE HID DRIVER
-M:	David Herrmann <dh.herrmann@googlemail.com>
+M:	David Rheinsberg <david.rheinsberg@gmail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-wiimote*

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -170,6 +170,15 @@ config ARC_CPU_HS
 
 endchoice
 
+config ARC_TUNE_MCPU
+	string "Override default -mcpu compiler flag"
+	default ""
+	help
+	  Override default -mcpu=xxx compiler flag (which is set depending on
+	  the ISA version) with the specified value.
+	  NOTE: If specified flag isn't supported by current compiler the
+	  ISA default value will be used as a fallback.
+
 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
 	help
@@ -465,6 +474,12 @@ config ARC_IRQ_NO_AUTOSAVE
 	  This is programmable and can be optionally disabled in which case
 	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
 
+config ARC_LPB_DISABLE
+	bool "Disable loop buffer (LPB)"
+	help
+	  On HS cores, loop buffer (LPB) is programmable in runtime and can
+	  be optionally disabled.
+
 endif # ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"