This test covers check for WCD and HDMI audio driver/devices and check
/proc/asound to ensure soundcard has devices attached.
Common assert_soundcard_present is implemented to check /proc/asound for
soundcards a devices associated with it. In this case 2 Playbacks and 1
Capture device.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Instead of reporting each thermal zone independently, test them all in
batch mode, and report one test case. When looking at the lists of
test results we will now have the same tests name for any platform
instead of a different number of tests executed for each of them.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Only first PCIe host is probed, other two hosts will fail probing with
ETIMEDOUT. Disable testing for corresponding devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Disable CPR until it's landed, fix PRNG driver name, don't try to mount
the firmware partition and boot the wcnss as part of the basic test
suite.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Typical use of assert_device_present is to first assert_driver_present
and then check for the individual devices. Let the driver check fail and
report any of the device tests as blocked if the driver is not present.
This makes it clearer in the output that a device test failed due to the
lack of the driver, rather than some other aspect.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add GENI wrapper test cases, add i2c11 test, reorder uart tests and add
uart3 (disabled for now to match dts), disable the GEN3 PCI tests as
there's nothing attached and fix remoteproc test case names.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add test for GENI wrapper, disable PCIe tests as there's nothing
attached on the test device and fix the name of the remoteproc tests.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It is convenient to deliver the bootrr as a cpio archive which can be
appended to an initramfs image.
The output cpio filename can be overriding the CPIONAME variable, it
is set to 'bootrr' by default.
Also use a default value for DESTDIR, so that "make cpio" just works.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The call to asset_device_present for rockchip-efuse and
rockchip-emmc-phy was missing some paramaters and always failed. Fix that
by adding the proper paramaters.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Some tests does not depend on a board. We can consider these tests
as generic and bootrr-generic-tests is added to contain them.
This scripts is started at the begining of bootrr-auto before boards
specific tests.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
