Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring: "There's a few orphans in the conversion to %pOF printf specifiers included here that no one else picked up. Summary: - Convert more DT code to use of_property_read_* API. - Improve DT overlay support when adding multiple overlays - Convert printk's to %pOF format specifiers. Most went via subsystem trees, but picked up the remaining orphans - Correct unittests to use preferred "okay" for "status" property value - Add a KASLR seed property - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa - Fix modalias buffer handling - Clean-up of include paths for building dtbs - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC - Add compatible string for Allwinner H5 Mali-450 GPU - Fix links to old OpenFirmware docs with new mirror on devicetree.org - Remove status property from binding doc examples" * tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) devicetree: Adjust status "ok" -> "okay" under drivers/of/ dt-bindings: Remove "status" from examples dt-bindings: pinctrl: sh-pfc: Use generic node name dt-bindings: Add vendor Mellanox dt-binding: net/phy: fix interrupts description virt: Convert to using %pOF instead of full_name macintosh: Convert to using %pOF instead of full_name ide: pmac: Convert to using %pOF instead of full_name microblaze: Convert to using %pOF instead of full_name dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/ of: Use PLATFORM_DEVID_NONE definition of/device: Fix of_device_get_modalias() buffer handling of/device: Prevent buffer overflow in of_device_modalias() dt-bindings: add amc6821, isl1208 trivial bindings dt-bindings: add vendor prefix for Theobroma Systems of: search scripts/dtc/include-prefixes path for both CPP and DTC of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP of: remove drivers/of/testcase-data from include search path for CPP of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered iio: srf08: add device tree binding for srf02 and srf10 ...
2026-08-18 02:22:47 -07:00 · 2017-09-07 14:43:33 -07:00
commit 74fee4e88f
@@ -108,6 +108,5 @@ Example:
 			frame-number = <1>
 			interrupts = <0 15 0x8>;
 			reg = <0xf0003000 0x1000>;
-			status = "disabled";
 		};
 	};
@@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-ranges = <&cpm_pinctrl 0 0 32>;
-		status = "disabled";
 	};

 };
@@ -57,7 +57,6 @@ Example:
 			      <0x0 0x1f227000 0x0 0x1000>;
 			interrupts = <0x0 0x87 0x4>;
 			dma-coherent;
-			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy2 0>;
 			phy-names = "sata-phy";
@@ -72,7 +71,6 @@ Example:
 			      <0x0 0x1f237000 0x0 0x1000>;
 			interrupts = <0x0 0x88 0x4>;
 			dma-coherent;
-			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy3 0>;
 			phy-names = "sata-phy";
@@ -13,5 +13,4 @@ Example:
 		reg = <0x83fe0000 0x4000>;
 		interrupts = <70>;
 		clocks = <&clks 161>;
-		status = "disabled";
 	};
@@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown:
 		};

 		devbus-bootcs {
-			status = "okay";
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;

 			/* NOR */
@@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown:

 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
-			status = "okay";
 			device_type = "pci";

 			#address-cells = <3>;
@@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown:

 			pcie@1,0 {
 				/* Port 0, Lane 0 */
-				status = "okay";
 			};
 		};

@@ -84,7 +84,6 @@ gmi@70090000 {
 	reset-names = "gmi";
 	ranges = <4 0 0xd0000000 0xfffffff>;

-	status = "okay";

 	bus@4,0 {
 		compatible = "simple-bus";
@@ -121,7 +120,6 @@ gmi@70090000 {
 	reset-names = "gmi";
 	ranges = <4 0 0xd0000000 0xfffffff>;

-	status = "okay";

 	can@4,0 {
 		reg = <4 0 0x100>;
@@ -33,7 +33,6 @@ Example:
 		#size-cells = <1>;
 		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;

-		status = "disabled";

 		child1 {
 			...
@@ -5,9 +5,31 @@ The chosen node does not represent a real device, but serves as a place
 for passing data between firmware and the operating system, like boot
 arguments. Data in the chosen node does not represent the hardware.

+The following properties are recognized:

-stdout-path property
--------------------
+
+kaslr-seed
+-----------
+
+This property is used when booting with CONFIG_RANDOMIZE_BASE as the
+entropy used to randomize the kernel image base address location. Since
+it is used directly, this value is intended only for KASLR, and should
+not be used for other purposes (as it may leak information about KASLR
+offsets). It is parsed as a u64 value, e.g.
+
+/ {
+	chosen {
+		kaslr-seed = <0xfeedbeef 0xc0def00d>;
+	};
+};
+
+Note that if this property is set from UEFI (or a bootloader in EFI
+mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
+the Linux EFI stub (which will populate the property itself, using
+EFI_RNG_PROTOCOL).
+
+stdout-path
+-----------

 Device trees may specify the device to be used for boot console output
 with a stdout-path property under /chosen, as described in the Devicetree
@@ -102,7 +102,6 @@ uart4: serial@80010000 {
 	reg = <0x80010000 0x4000>;
 	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
 	interrupts = <19>;
-	status = "disabled";
 };

 Clock consumer with only one, _AHB_ sink.
@@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated
 		interrupts = <0 90 1>;
 		clocks = <&clkc_AO CLKID_AO_UART1>;
 		resets = <&clkc_AO RESET_AO_UART1>;
-		status = "disabled";
 	};
@@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock
 		reg = <0xc81004c0 0x14>;
 		interrupts = <0 90 1>;
 		clocks = <&clkc CLKID_CLK81>;
-		status = "disabled";
 	};
@@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock
 		reg = <0xc81004c0 0x14>;
 		interrupts = <0 90 1>;
 		clocks = <&clkc CLKID_CLK81>;
-		status = "disabled";
 	};
@@ -46,7 +46,6 @@ Device tree example:

 	uart@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock
 		clock-names = "uart", "clk_uart_baud0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_bus>;
-		status = "disabled";
 	};
@@ -38,5 +38,4 @@ Examples:
 		clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
 			 <&crg_ctrl HI3660_PCLK>;
 		clock-names = "uartclk", "apb_pclk";
-		status = "disabled";
 	};
@@ -27,5 +27,4 @@ Examples:
 		interrupts = <0 49 4>;
 		clocks = <&clock HIX5HD2_FIXED_83M>;
 		clock-names = "apb_pclk";
-		status = "disabled";
 	};
@@ -24,5 +24,4 @@ Examples:
 		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
 			 <&clks IMX21_CLK_PER1>;
 		clock-names = "ipg", "per";
-		status = "disabled";
 	};
@@ -67,5 +67,4 @@ auart0: serial@8006c000 {
 	reg = <0x8006c000 0x2000>;
 	interrupts = <24 25 23>;
 	clocks = <&clks 32>;
-	status = "disabled";
 };
@@ -157,5 +157,4 @@ uart1: serial@43f90000 {
 	interrupts = <45>;
 	clocks = <&clks 79>, <&clks 50>;
 	clock-names = "ipg", "per";
-	status = "disabled";
 };
@@ -24,5 +24,4 @@ Examples:
 		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
 			 <&clks IMX27_CLK_PER1_GATE>;
 		clock-names = "ipg", "per";
-		status = "disabled";
 	};