Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 "This adds following items:

   - watchdog restart handler support
   - watchdog reboot notifier support
   - watchdog sysfs attributes
   - support for the following new devices: AMD Mullins platform, AMD
     Carrizo platform, meson8b SoC, CSRatlas7, TS-4800, Alphascale
     asm9260-wdt, Zodiac, Sigma Designs SMP86xx/SMP87xx
   - Changes in refcounting for the watchdog core
   - watchdog core improvements
   - and small fixes"

* git://www.linux-watchdog.org/linux-watchdog: (60 commits)
  watchdog: asm9260: remove __init and __exit annotations
  watchdog: Drop pointer to watchdog device from struct watchdog_device
  watchdog: ziirave: Use watchdog infrastructure to create sysfs attributes
  watchdog: Add support for creating driver specific sysfs attributes
  watchdog: kill unref/ref ops
  watchdog: stmp3xxx: Remove unused variables
  watchdog: add MT7621 watchdog support
  hwmon: (sch56xx) Drop watchdog driver data reference count callbacks
  watchdog: da9055_wdt: Drop reference counting
  watchdog: da9052_wdt: Drop reference counting
  watchdog: Separate and maintain variables based on variable lifetime
  watchdog: diag288: Stop re-using watchdog core internal flags
  watchdog: Create watchdog device in watchdog_dev.c
  watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_device
  watchdog: mena21: Do not use device pointer from struct watchdog_device
  watchdog: gpio: Do not use device pointer from struct watchdog_device
  watchdog: tangox: Print info message using pointer to platform device
  watchdog: bcm2835_wdt: Drop log message if watchdog is stopped
  devicetree: watchdog: add binding for Sigma Designs SMP8642 watchdog
  watchdog: add support for Sigma Designs SMP86xx/SMP87xx
  ...

Documentation/ABI/testing/sysfs-class-watchdog

@@ -0,0 +1,51 @@
+What:		/sys/class/watchdog/watchdogn/bootstatus
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains status of the watchdog
+		device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/identity
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains identity string of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/nowayout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. While reading, it gives '1' if that
+		device supports nowayout feature else, it gives '0'.
+
+What:		/sys/class/watchdog/watchdogn/state
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It gives active/inactive status of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/status
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains watchdog device's
+		internal status bits. It is equivalent to WDIOC_GETSTATUS
+		of ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeleft
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains value of time left for
+		reset generation. It is equivalent to WDIOC_GETTIMELEFT of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It is read to know about current
+		value of timeout programmed.

Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt

@@ -0,0 +1,35 @@
+Alphascale asm9260 Watchdog timer
+
+Required properties:
+
+- compatible : should be "alphascale,asm9260-wdt".
+- reg : Specifies base physical address and size of the registers.
+- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
+- clock-names : should be set to
+	"mod" - source for tick counter.
+	"ahb" - ahb gate.
+- resets : phandle pointing to the system reset controller with
+	line index for the watchdog.
+- reset-names : should be set to "wdt_rst".
+
+Optional properties:
+- timeout-sec : shall contain the default watchdog timeout in seconds,
+	if unset, the default timeout is 30 seconds.
+- alphascale,mode : three modes are supported
+	"hw" - hw reset (default).
+	"sw" - sw reset.
+	"debug" - no action is taken.
+
+Example:
+
+watchdog0: watchdog@80048000 {
+	compatible = "alphascale,asm9260-wdt";
+	reg = <0x80048000 0x10>;
+	clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
+	clock-names = "mod", "ahb";
+	interrupts = <55>;
+	resets = <&rst WDT_RESET>;
+	reset-names = "wdt_rst";
+	timeout-sec = <30>;
+	alphascale,mode = "hw";
+};

Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt

@@ -0,0 +1,12 @@
+Ralink Watchdog Timers
+
+Required properties:
+- compatible: must be "mediatek,mt7621-wdt"
+- reg: physical base address of the controller and length of the register range
+
+Example:
+
+	watchdog@100 {
+		compatible = "mediatek,mt7621-wdt";
+		reg = <0x100 0x10>;
+	};

Documentation/devicetree/bindings/watchdog/sigma,smp8642-wdt.txt

@@ -0,0 +1,18 @@
+Sigma Designs SMP86xx/SMP87xx watchdog
+
+Required properties:
+- compatible: Should be "sigma,smp8642-wdt"
+- reg: Specifies the physical address region
+- clocks: Should be a phandle to the clock
+
+Optional properties:
+- timeout-sec: watchdog timeout in seconds
+
+Example:
+
+watchdog@1fd00 {
+	compatible = "sigma,smp8642-wdt";
+	reg = <0x1fd00 8>;
+	clocks = <&xtal_in_clk>;
+	timeout-sec = <30>;
+};

Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt

@@ -0,0 +1,25 @@
+Technologic Systems Watchdog
+
+Required properties:
+- compatible: must be "technologic,ts4800-wdt"
+- syscon: phandle / integer array that points to the syscon node which
+          describes the FPGA's syscon registers.
+          - phandle to FPGA's syscon
+          - offset to the watchdog register
+
+Optional property:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+syscon: syscon@b0010000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0xb0010000 0x3d>;
+	reg-io-width = <2>;
+
+	wdt@e {
+		compatible = "technologic,ts4800-wdt";
+		syscon = <&syscon 0xe>;
+		timeout-sec = <10>;
+	};
+}

Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt

@@ -0,0 +1,19 @@
+Zodiac RAVE Watchdog Timer
+
+Required properties:
+- compatible: must be "zii,rave-wdt"
+- reg: i2c slave address of device, usually 0x38
+
+Optional Properties:
+- timeout-sec: Watchdog timeout value in seconds.
+- reset-duration-ms: Duration of the pulse generated when the watchdog times
+  out. Value in milliseconds.
+
+Example:
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+		timeout-sec = <30>;
+		reset-duration-ms = <30>;
+	};

Documentation/watchdog/watchdog-kernel-api.txt

@@ -44,17 +44,18 @@ The watchdog device structure looks like this:
 
 struct watchdog_device {
 	int id;
-	struct cdev cdev;
-	struct device *dev;
 	struct device *parent;
+	const struct attribute_group **groups;
 	const struct watchdog_info *info;
 	const struct watchdog_ops *ops;
 	unsigned int bootstatus;
 	unsigned int timeout;
 	unsigned int min_timeout;
 	unsigned int max_timeout;
+	struct notifier_block reboot_nb;
+	struct notifier_block restart_nb;
 	void *driver_data;
-	struct mutex lock;
+	struct watchdog_core_data *wd_data;
 	unsigned long status;
 	struct list_head deferred;
 };
@@ -64,27 +65,32 @@ It contains following fields:
   /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old
   /dev/watchdog miscdev. The id is set automatically when calling
   watchdog_register_device.
-* cdev: cdev for the dynamic /dev/watchdog<id> device nodes. This
-  field is also populated by watchdog_register_device.
-* dev: device under the watchdog class (created by watchdog_register_device).
 * parent: set this to the parent device (or NULL) before calling
   watchdog_register_device.
+* groups: List of sysfs attribute groups to create when creating the watchdog
+  device.
 * info: a pointer to a watchdog_info structure. This structure gives some
   additional information about the watchdog timer itself. (Like it's unique name)
 * ops: a pointer to the list of watchdog operations that the watchdog supports.
 * timeout: the watchdog timer's timeout value (in seconds).
 * min_timeout: the watchdog timer's minimum timeout value (in seconds).
 * max_timeout: the watchdog timer's maximum timeout value (in seconds).
+* reboot_nb: notifier block that is registered for reboot notifications, for
+  internal use only. If the driver calls watchdog_stop_on_reboot, watchdog core
+  will stop the watchdog on such notifications.
+* restart_nb: notifier block that is registered for machine restart, for
+  internal use only. If a watchdog is capable of restarting the machine, it
+  should define ops->restart. Priority can be changed through
+  watchdog_set_restart_priority.
 * bootstatus: status of the device after booting (reported with watchdog
   WDIOF_* status bits).
 * driver_data: a pointer to the drivers private data of a watchdog device.
   This data should only be accessed via the watchdog_set_drvdata and
   watchdog_get_drvdata routines.
-* lock: Mutex for WatchDog Timer Driver Core internal use only.
+* wd_data: a pointer to watchdog core internal data.
 * status: this field contains a number of status bits that give extra
   information about the status of the device (Like: is the watchdog timer
-  running/active, is the nowayout bit set, is the device opened via
-  the /dev/watchdog interface or not, ...).
+  running/active, or is the nowayout bit set).
 * deferred: entry in wtd_deferred_reg_list which is used to
   register early initialized watchdogs.
 
@@ -100,8 +106,9 @@ struct watchdog_ops {
 	unsigned int (*status)(struct watchdog_device *);
 	int (*set_timeout)(struct watchdog_device *, unsigned int);
 	unsigned int (*get_timeleft)(struct watchdog_device *);
-	void (*ref)(struct watchdog_device *);
-	void (*unref)(struct watchdog_device *);
+	int (*restart)(struct watchdog_device *);
+	void (*ref)(struct watchdog_device *) __deprecated;
+	void (*unref)(struct watchdog_device *) __deprecated;
 	long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
 };
 
@@ -110,20 +117,6 @@ driver's operations. This module owner will be used to lock the module when
 the watchdog is active. (This to avoid a system crash when you unload the
 module and /dev/watchdog is still open).
 
-If the watchdog_device struct is dynamically allocated, just locking the module
-is not enough and a driver also needs to define the ref and unref operations to
-ensure the structure holding the watchdog_device does not go away.
-
-The simplest (and usually sufficient) implementation of this is to:
-1) Add a kref struct to the same structure which is holding the watchdog_device
-2) Define a release callback for the kref which frees the struct holding both
-3) Call kref_init on this kref *before* calling watchdog_register_device()
-4) Define a ref operation calling kref_get on this kref
-5) Define a unref operation calling kref_put on this kref
-6) When it is time to cleanup:
- * Do not kfree() the struct holding both, the last kref_put will do this!
- * *After* calling watchdog_unregister_device() call kref_put on the kref
-
 Some operations are mandatory and some are optional. The mandatory operations
 are:
 * start: this is a pointer to the routine that starts the watchdog timer
@@ -164,34 +157,23 @@ they are supported. These optional routines/operations are:
   (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the
   watchdog's info structure).
 * get_timeleft: this routines returns the time that's left before a reset.
-* ref: the operation that calls kref_get on the kref of a dynamically
-  allocated watchdog_device struct.
-* unref: the operation that calls kref_put on the kref of a dynamically
-  allocated watchdog_device struct.
+* restart: this routine restarts the machine. It returns 0 on success or a
+  negative errno code for failure.
 * ioctl: if this routine is present then it will be called first before we do
   our own internal ioctl call handling. This routine should return -ENOIOCTLCMD
   if a command is not supported. The parameters that are passed to the ioctl
   call are: watchdog_device, cmd and arg.
 
+The 'ref' and 'unref' operations are no longer used and deprecated.
+
 The status bits should (preferably) be set with the set_bit and clear_bit alike
 bit-operations. The status bits that are defined are:
 * WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device
   is active or not. When the watchdog is active after booting, then you should
   set this status bit (Note: when you register the watchdog timer device with
   this bit set, then opening /dev/watchdog will skip the start operation)
-* WDOG_DEV_OPEN: this status bit shows whether or not the watchdog device
-  was opened via /dev/watchdog.
-  (This bit should only be used by the WatchDog Timer Driver Core).
-* WDOG_ALLOW_RELEASE: this bit stores whether or not the magic close character
-  has been sent (so that we can support the magic close feature).
-  (This bit should only be used by the WatchDog Timer Driver Core).
 * WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog.
   If this bit is set then the watchdog timer will not be able to stop.
-* WDOG_UNREGISTERED: this bit gets set by the WatchDog Timer Driver Core
-  after calling watchdog_unregister_device, and then checked before calling
-  any watchdog_ops, so that you can be sure that no operations (other then
-  unref) will get called after unregister, even if userspace still holds a
-  reference to /dev/watchdog
 
   To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog
   timer device) you can either:
@@ -231,3 +213,18 @@ the device tree (if the module timeout parameter is invalid). Best practice is
 to set the default timeout value as timeout value in the watchdog_device and
 then use this function to set the user "preferred" timeout value.
 This routine returns zero on success and a negative errno code for failure.
+
+To disable the watchdog on reboot, the user must call the following helper:
+
+static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd);
+
+To change the priority of the restart handler the following helper should be
+used:
+
+void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority);
+
+User should follow the following guidelines for setting the priority:
+* 0: should be called in last resort, has limited restart capabilities
+* 128: default restart handler, use if no other handler is expected to be
+  available, and/or if restart is sufficient to restart the entire system
+* 255: highest priority, will preempt all other restart handlers

MAINTAINERS

@@ -11676,6 +11676,7 @@ F:	drivers/input/tablet/wacom_serial4.c
 
 WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
+R:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-watchdog@vger.kernel.org
 W:	http://www.linux-watchdog.org/
 T:	git git://www.linux-watchdog.org/linux-watchdog.git

drivers/hwmon/sch56xx-common.c

@@ -30,7 +30,6 @@
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
-#include <linux/kref.h>
 #include <linux/slab.h>
 #include "sch56xx-common.h"
 
@@ -67,7 +66,6 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 struct sch56xx_watchdog_data {
 	u16 addr;
 	struct mutex *io_lock;
-	struct kref kref;
 	struct watchdog_info wdinfo;
 	struct watchdog_device wddev;
 	u8 watchdog_preset;
@@ -258,15 +256,6 @@ EXPORT_SYMBOL(sch56xx_read_virtual_reg12);
  * Watchdog routines
  */
 
-/* Release our data struct when we're unregistered *and*
-   all references to our watchdog device are released */
-static void watchdog_release_resources(struct kref *r)
-{
-	struct sch56xx_watchdog_data *data =
-		container_of(r, struct sch56xx_watchdog_data, kref);
-	kfree(data);
-}
-
 static int watchdog_set_timeout(struct watchdog_device *wddev,
 				unsigned int timeout)
 {
@@ -395,28 +384,12 @@ static int watchdog_stop(struct watchdog_device *wddev)
 	return 0;
 }
 
-static void watchdog_ref(struct watchdog_device *wddev)
-{
-	struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
-
-	kref_get(&data->kref);
-}
-
-static void watchdog_unref(struct watchdog_device *wddev)
-{
-	struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
-
-	kref_put(&data->kref, watchdog_release_resources);
-}
-
 static const struct watchdog_ops watchdog_ops = {
 	.owner		= THIS_MODULE,
 	.start		= watchdog_start,
 	.stop		= watchdog_stop,
 	.ping		= watchdog_trigger,
 	.set_timeout	= watchdog_set_timeout,
-	.ref		= watchdog_ref,
-	.unref		= watchdog_unref,
 };
 
 struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent,
@@ -448,7 +421,6 @@ struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent,
 
 	data->addr = addr;
 	data->io_lock = io_lock;
-	kref_init(&data->kref);
 
 	strlcpy(data->wdinfo.identity, "sch56xx watchdog",
 		sizeof(data->wdinfo.identity));
@@ -494,8 +466,7 @@ EXPORT_SYMBOL(sch56xx_watchdog_register);
 void sch56xx_watchdog_unregister(struct sch56xx_watchdog_data *data)
 {
 	watchdog_unregister_device(&data->wddev);
-	kref_put(&data->kref, watchdog_release_resources);
-	/* Don't touch data after this it may have been free-ed! */
+	kfree(data);
 }
 EXPORT_SYMBOL(sch56xx_watchdog_unregister);
 

drivers/watchdog/Kconfig

@@ -46,6 +46,13 @@ config WATCHDOG_NOWAYOUT
 	  get killed. If you say Y here, the watchdog cannot be stopped once
 	  it has been started.
 
+config WATCHDOG_SYSFS
+	bool "Read different watchdog information through sysfs"
+	default n
+	help
+	  Say Y here if you want to enable watchdog device status read through
+	  sysfs attributes.
+
 #
 # General Watchdog drivers
 #
@@ -135,6 +142,16 @@ config MENF21BMC_WATCHDOG
 	  This driver can also be built as a module. If so the module
 	  will be called menf21bmc_wdt.
 
+config TANGOX_WATCHDOG
+	tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
+	select WATCHDOG_CORE
+	depends on ARCH_TANGOX || COMPILE_TEST
+	help
+	  Support for the watchdog in Sigma Designs SMP86xx (tango3)
+	  and SMP87xx (tango4) family chips.
+
+	  This driver can be built as a module. The module name is tangox_wdt.
+
 config WM831X_WATCHDOG
 	tristate "WM831x watchdog"
 	depends on MFD_WM831X
@@ -161,6 +178,17 @@ config XILINX_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called of_xilinx_wdt.
 
+config ZIIRAVE_WATCHDOG
+	tristate "Zodiac RAVE Watchdog Timer"
+	depends on I2C
+	select WATCHDOG_CORE
+	help
+	  Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog
+	  Processor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ziirave_wdt.
+
 # ALPHA Architecture
 
 # ARM Architecture
@@ -173,6 +201,16 @@ config ARM_SP805_WATCHDOG
 	  ARM Primecell SP805 Watchdog timer. This will reboot your system when
 	  the timeout is reached.
 
+config ASM9260_WATCHDOG
+	tristate "Alphascale ASM9260 watchdog"
+	depends on MACH_ASM9260
+	depends on OF
+	select WATCHDOG_CORE
+	select RESET_CONTROLLER
+	help
+	  Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
+	  system when the timeout is reached.
+
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
 	depends on SOC_AT91RM9200 && MFD_SYSCON
@@ -426,6 +464,16 @@ config NUC900_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called nuc900_wdt.
 
+config TS4800_WATCHDOG
+	tristate "TS-4800 Watchdog"
+	depends on HAS_IOMEM && OF
+	select WATCHDOG_CORE
+	select MFD_SYSCON
+	help
+	  Technologic Systems TS-4800 has watchdog timer implemented in
+	  an external FPGA. Say Y here if you want to support for the
+	  watchdog timer on TS-4800 board.
+
 config TS72XX_WATCHDOG
 	tristate "TS-72XX SBC Watchdog"
 	depends on MACH_TS72XX
@@ -578,6 +626,16 @@ config LPC18XX_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called lpc18xx_wdt.
 
+config ATLAS7_WATCHDOG
+	tristate "CSRatlas7 watchdog"
+	depends on ARCH_ATLAS7
+	help
+	  Say Y here to include Watchdog timer support for the watchdog
+	  existing on the CSRatlas7 series platforms.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atlas7_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -1345,6 +1403,13 @@ config RALINK_WDT
 	help
 	  Hardware driver for the Ralink SoC Watchdog Timer.
 
+config MT7621_WDT
+	tristate "Mediatek SoC watchdog"
+	select WATCHDOG_CORE
+	depends on SOC_MT7620 || SOC_MT7621
+	help
+	  Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
+
 # PARISC Architecture
 
 # POWERPC Architecture

drivers/watchdog/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
 
 # ARM Architecture
 obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
+obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o
 obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
 obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
 obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o
@@ -53,6 +54,7 @@ obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
 obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
 obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
@@ -69,6 +71,7 @@ obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
 obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
 obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
 obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
+obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -149,6 +152,7 @@ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
 obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
 obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
 obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
+obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
 
 # PARISC Architecture
 
@@ -187,8 +191,10 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
 obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
 obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
 obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
+obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
 obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
+obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
 obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o

drivers/watchdog/asm9260_wdt.c

@@ -0,0 +1,403 @@
+/*
+ * Watchdog driver for Alphascale ASM9260.
+ *
+ * Copyright (c) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/reset.h>
+#include <linux/watchdog.h>
+
+#define CLOCK_FREQ	1000000
+
+/* Watchdog Mode register */
+#define HW_WDMOD			0x00
+/* Wake interrupt. Set by HW, can't be cleared. */
+#define BM_MOD_WDINT			BIT(3)
+/* This bit set if timeout reached. Cleared by SW. */
+#define BM_MOD_WDTOF			BIT(2)
+/* HW Reset on timeout */
+#define BM_MOD_WDRESET			BIT(1)
+/* WD enable */
+#define BM_MOD_WDEN			BIT(0)
+
+/*
+ * Watchdog Timer Constant register
+ * Minimal value is 0xff, the meaning of this value
+ * depends on used clock: T = WDCLK * (0xff + 1) * 4
+ */
+#define HW_WDTC				0x04
+#define BM_WDTC_MAX(freq)		(0x7fffffff / (freq))
+
+/* Watchdog Feed register */
+#define HW_WDFEED			0x08
+
+/* Watchdog Timer Value register */
+#define HW_WDTV				0x0c
+
+#define ASM9260_WDT_DEFAULT_TIMEOUT	30
+
+enum asm9260_wdt_mode {
+	HW_RESET,
+	SW_RESET,
+	DEBUG,
+};
+
+struct asm9260_wdt_priv {
+	struct device		*dev;
+	struct watchdog_device	wdd;
+	struct clk		*clk;
+	struct clk		*clk_ahb;
+	struct reset_control	*rst;
+	struct notifier_block	restart_handler;
+
+	void __iomem		*iobase;
+	int			irq;
+	unsigned long		wdt_freq;
+	enum asm9260_wdt_mode	mode;
+};
+
+static int asm9260_wdt_feed(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	iowrite32(0xaa, priv->iobase + HW_WDFEED);
+	iowrite32(0x55, priv->iobase + HW_WDFEED);
+
+	return 0;
+}
+
+static unsigned int asm9260_wdt_gettimeleft(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+	u32 counter;
+
+	counter = ioread32(priv->iobase + HW_WDTV);
+
+	return DIV_ROUND_CLOSEST(counter, priv->wdt_freq);
+}
+
+static int asm9260_wdt_updatetimeout(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+	u32 counter;
+
+	counter = wdd->timeout * priv->wdt_freq;
+
+	iowrite32(counter, priv->iobase + HW_WDTC);
+
+	return 0;
+}
+
+static int asm9260_wdt_enable(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+	u32 mode = 0;
+
+	if (priv->mode == HW_RESET)
+		mode = BM_MOD_WDRESET;
+
+	iowrite32(BM_MOD_WDEN | mode, priv->iobase + HW_WDMOD);
+
+	asm9260_wdt_updatetimeout(wdd);
+
+	asm9260_wdt_feed(wdd);
+
+	return 0;
+}
+
+static int asm9260_wdt_disable(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	/* The only way to disable WD is to reset it. */
+	reset_control_assert(priv->rst);
+	reset_control_deassert(priv->rst);
+
+	return 0;
+}
+
+static int asm9260_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
+{
+	wdd->timeout = to;
+	asm9260_wdt_updatetimeout(wdd);
+
+	return 0;
+}
+
+static void asm9260_wdt_sys_reset(struct asm9260_wdt_priv *priv)
+{
+	/* init WD if it was not started */
+
+	iowrite32(BM_MOD_WDEN | BM_MOD_WDRESET, priv->iobase + HW_WDMOD);
+
+	iowrite32(0xff, priv->iobase + HW_WDTC);
+	/* first pass correct sequence */
+	asm9260_wdt_feed(&priv->wdd);
+	/*
+	 * Then write wrong pattern to the feed to trigger reset
+	 * ASAP.
+	 */
+	iowrite32(0xff, priv->iobase + HW_WDFEED);
+
+	mdelay(1000);
+}
+
+static irqreturn_t asm9260_wdt_irq(int irq, void *devid)
+{
+	struct asm9260_wdt_priv *priv = devid;
+	u32 stat;
+
+	stat = ioread32(priv->iobase + HW_WDMOD);
+	if (!(stat & BM_MOD_WDINT))
+		return IRQ_NONE;
+
+	if (priv->mode == DEBUG) {
+		dev_info(priv->dev, "Watchdog Timeout. Do nothing.\n");
+	} else {
+		dev_info(priv->dev, "Watchdog Timeout. Doing SW Reset.\n");
+		asm9260_wdt_sys_reset(priv);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int asm9260_restart_handler(struct notifier_block *this,
+				   unsigned long mode, void *cmd)
+{
+	struct asm9260_wdt_priv *priv =
+		container_of(this, struct asm9260_wdt_priv, restart_handler);
+
+	asm9260_wdt_sys_reset(priv);
+
+	return NOTIFY_DONE;
+}
+
+static const struct watchdog_info asm9260_wdt_ident = {
+	.options          =     WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+				| WDIOF_MAGICCLOSE,
+	.identity         =	"Alphascale asm9260 Watchdog",
+};
+
+static struct watchdog_ops asm9260_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= asm9260_wdt_enable,
+	.stop		= asm9260_wdt_disable,
+	.get_timeleft	= asm9260_wdt_gettimeleft,
+	.ping		= asm9260_wdt_feed,
+	.set_timeout	= asm9260_wdt_settimeout,
+};
+
+static int asm9260_wdt_get_dt_clks(struct asm9260_wdt_priv *priv)
+{
+	int err;
+	unsigned long clk;
+
+	priv->clk = devm_clk_get(priv->dev, "mod");
+	if (IS_ERR(priv->clk)) {
+		dev_err(priv->dev, "Failed to get \"mod\" clk\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	/* configure AHB clock */
+	priv->clk_ahb = devm_clk_get(priv->dev, "ahb");
+	if (IS_ERR(priv->clk_ahb)) {
+		dev_err(priv->dev, "Failed to get \"ahb\" clk\n");
+		return PTR_ERR(priv->clk_ahb);
+	}
+
+	err = clk_prepare_enable(priv->clk_ahb);
+	if (err) {
+		dev_err(priv->dev, "Failed to enable ahb_clk!\n");
+		return err;
+	}
+
+	err = clk_set_rate(priv->clk, CLOCK_FREQ);
+	if (err) {
+		clk_disable_unprepare(priv->clk_ahb);
+		dev_err(priv->dev, "Failed to set rate!\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		clk_disable_unprepare(priv->clk_ahb);
+		dev_err(priv->dev, "Failed to enable clk!\n");
+		return err;
+	}
+
+	/* wdt has internal divider */
+	clk = clk_get_rate(priv->clk);
+	if (!clk) {
+		clk_disable_unprepare(priv->clk);
+		clk_disable_unprepare(priv->clk_ahb);
+		dev_err(priv->dev, "Failed, clk is 0!\n");
+		return -EINVAL;
+	}
+
+	priv->wdt_freq = clk / 2;
+
+	return 0;
+}
+
+static void asm9260_wdt_get_dt_mode(struct asm9260_wdt_priv *priv)
+{
+	const char *tmp;
+	int ret;
+
+	/* default mode */
+	priv->mode = HW_RESET;
+
+	ret = of_property_read_string(priv->dev->of_node,
+				      "alphascale,mode", &tmp);
+	if (ret < 0)
+		return;
+
+	if (!strcmp(tmp, "hw"))
+		priv->mode = HW_RESET;
+	else if (!strcmp(tmp, "sw"))
+		priv->mode = SW_RESET;
+	else if (!strcmp(tmp, "debug"))
+		priv->mode = DEBUG;
+	else
+		dev_warn(priv->dev, "unknown reset-type: %s. Using default \"hw\" mode.",
+			 tmp);
+}
+
+static int asm9260_wdt_probe(struct platform_device *pdev)
+{
+	struct asm9260_wdt_priv *priv;
+	struct watchdog_device *wdd;
+	struct resource *res;
+	int ret;
+	const char * const mode_name[] = { "hw", "sw", "debug", };
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct asm9260_wdt_priv),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->iobase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->iobase))
+		return PTR_ERR(priv->iobase);
+
+	ret = asm9260_wdt_get_dt_clks(priv);
+	if (ret)
+		return ret;
+
+	priv->rst = devm_reset_control_get(&pdev->dev, "wdt_rst");
+	if (IS_ERR(priv->rst))
+		return PTR_ERR(priv->rst);
+
+	wdd = &priv->wdd;
+	wdd->info = &asm9260_wdt_ident;
+	wdd->ops = &asm9260_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_timeout = BM_WDTC_MAX(priv->wdt_freq);
+	wdd->parent = &pdev->dev;
+
+	watchdog_set_drvdata(wdd, priv);
+
+	/*
+	 * If 'timeout-sec' unspecified in devicetree, assume a 30 second
+	 * default, unless the max timeout is less than 30 seconds, then use
+	 * the max instead.
+	 */
+	wdd->timeout = ASM9260_WDT_DEFAULT_TIMEOUT;
+	watchdog_init_timeout(wdd, 0, &pdev->dev);
+
+	asm9260_wdt_get_dt_mode(priv);
+
+	if (priv->mode != HW_RESET)
+		priv->irq = platform_get_irq(pdev, 0);
+
+	if (priv->irq > 0) {
+		/*
+		 * Not all supported platforms specify an interrupt for the
+		 * watchdog, so let's make it optional.
+		 */
+		ret = devm_request_irq(&pdev->dev, priv->irq,
+				       asm9260_wdt_irq, 0, pdev->name, priv);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "failed to request IRQ\n");
+	}
+
+	ret = watchdog_register_device(wdd);
+	if (ret)
+		goto clk_off;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->restart_handler.notifier_call = asm9260_restart_handler;
+	priv->restart_handler.priority = 128;
+	ret = register_restart_handler(&priv->restart_handler);
+	if (ret)
+		dev_warn(&pdev->dev, "cannot register restart handler\n");
+
+	dev_info(&pdev->dev, "Watchdog enabled (timeout: %d sec, mode: %s)\n",
+		 wdd->timeout, mode_name[priv->mode]);
+	return 0;
+
+clk_off:
+	clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk_ahb);
+	return ret;
+}
+
+static void asm9260_wdt_shutdown(struct platform_device *pdev)
+{
+	struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev);
+
+	asm9260_wdt_disable(&priv->wdd);
+}
+
+static int asm9260_wdt_remove(struct platform_device *pdev)
+{
+	struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev);
+
+	asm9260_wdt_disable(&priv->wdd);
+
+	unregister_restart_handler(&priv->restart_handler);
+
+	watchdog_unregister_device(&priv->wdd);
+
+	clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk_ahb);
+
+	return 0;
+}
+
+static const struct of_device_id asm9260_wdt_of_match[] = {
+	{ .compatible = "alphascale,asm9260-wdt"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, asm9260_wdt_of_match);
+
+static struct platform_driver asm9260_wdt_driver = {
+	.driver = {
+		.name = "asm9260-wdt",
+		.owner = THIS_MODULE,
+		.of_match_table	= asm9260_wdt_of_match,
+	},
+	.probe = asm9260_wdt_probe,
+	.remove = asm9260_wdt_remove,
+	.shutdown = asm9260_wdt_shutdown,
+};
+module_platform_driver(asm9260_wdt_driver);
+
+MODULE_DESCRIPTION("asm9260 WatchDog Timer Driver");
+MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
+MODULE_LICENSE("GPL");

drivers/watchdog/atlas7_wdt.c

@@ -0,0 +1,242 @@
+/*
+ * Watchdog driver for CSR Atlas7
+ *
+ * Copyright (c) 2015 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define ATLAS7_TIMER_WDT_INDEX		5
+#define ATLAS7_WDT_DEFAULT_TIMEOUT	20
+
+#define ATLAS7_WDT_CNT_CTRL	(0 + 4 * ATLAS7_TIMER_WDT_INDEX)
+#define ATLAS7_WDT_CNT_MATCH	(0x18 + 4 * ATLAS7_TIMER_WDT_INDEX)
+#define ATLAS7_WDT_CNT		(0x48 +  4 * ATLAS7_TIMER_WDT_INDEX)
+#define ATLAS7_WDT_CNT_EN	(BIT(0) | BIT(1))
+#define ATLAS7_WDT_EN		0x64
+
+static unsigned int timeout = ATLAS7_WDT_DEFAULT_TIMEOUT;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, uint, 0);
+module_param(nowayout, bool, 0);
+
+MODULE_PARM_DESC(timeout, "Default watchdog timeout (in seconds)");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct atlas7_wdog {
+	struct device *dev;
+	void __iomem *base;
+	unsigned long tick_rate;
+	struct clk *clk;
+};
+
+static unsigned int atlas7_wdt_gettimeleft(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+	u32 counter, match, delta;
+
+	counter = readl(wdt->base + ATLAS7_WDT_CNT);
+	match = readl(wdt->base + ATLAS7_WDT_CNT_MATCH);
+	delta = match - counter;
+
+	return  delta / wdt->tick_rate;
+}
+
+static int atlas7_wdt_ping(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+	u32 counter, match, delta;
+
+	counter = readl(wdt->base + ATLAS7_WDT_CNT);
+	delta = wdd->timeout * wdt->tick_rate;
+	match = counter + delta;
+
+	writel(match, wdt->base + ATLAS7_WDT_CNT_MATCH);
+
+	return 0;
+}
+
+static int atlas7_wdt_enable(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	atlas7_wdt_ping(wdd);
+
+	writel(readl(wdt->base + ATLAS7_WDT_CNT_CTRL) | ATLAS7_WDT_CNT_EN,
+	      wdt->base + ATLAS7_WDT_CNT_CTRL);
+	writel(1, wdt->base + ATLAS7_WDT_EN);
+
+	return 0;
+}
+
+static int atlas7_wdt_disable(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	writel(0, wdt->base + ATLAS7_WDT_EN);
+	writel(readl(wdt->base + ATLAS7_WDT_CNT_CTRL) & ~ATLAS7_WDT_CNT_EN,
+	      wdt->base + ATLAS7_WDT_CNT_CTRL);
+
+	return 0;
+}
+
+static int atlas7_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
+{
+	wdd->timeout = to;
+
+	return 0;
+}
+
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
+
+static const struct watchdog_info atlas7_wdt_ident = {
+	.options = OPTIONS,
+	.firmware_version = 0,
+	.identity = "atlas7 Watchdog",
+};
+
+static struct watchdog_ops atlas7_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = atlas7_wdt_enable,
+	.stop = atlas7_wdt_disable,
+	.get_timeleft = atlas7_wdt_gettimeleft,
+	.ping = atlas7_wdt_ping,
+	.set_timeout = atlas7_wdt_settimeout,
+};
+
+static struct watchdog_device atlas7_wdd = {
+	.info = &atlas7_wdt_ident,
+	.ops = &atlas7_wdt_ops,
+	.timeout = ATLAS7_WDT_DEFAULT_TIMEOUT,
+};
+
+static const struct of_device_id atlas7_wdt_ids[] = {
+	{ .compatible = "sirf,atlas7-tick"},
+	{}
+};
+
+static int atlas7_wdt_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct atlas7_wdog *wdt;
+	struct resource *res;
+	struct clk *clk;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk enable failed\n");
+		goto err;
+	}
+
+	/* disable watchdog hardware */
+	writel(0, wdt->base + ATLAS7_WDT_CNT_CTRL);
+
+	wdt->tick_rate = clk_get_rate(clk);
+	wdt->clk = clk;
+	atlas7_wdd.min_timeout = 1;
+	atlas7_wdd.max_timeout = UINT_MAX / wdt->tick_rate;
+
+	watchdog_init_timeout(&atlas7_wdd, 0, &pdev->dev);
+	watchdog_set_nowayout(&atlas7_wdd, nowayout);
+
+	watchdog_set_drvdata(&atlas7_wdd, wdt);
+	platform_set_drvdata(pdev, &atlas7_wdd);
+
+	ret = watchdog_register_device(&atlas7_wdd);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	clk_disable_unprepare(clk);
+err:
+	clk_put(clk);
+	return ret;
+}
+
+static void atlas7_wdt_shutdown(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	atlas7_wdt_disable(wdd);
+	clk_disable_unprepare(wdt->clk);
+}
+
+static int atlas7_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	atlas7_wdt_shutdown(pdev);
+	clk_put(wdt->clk);
+	return 0;
+}
+
+static int __maybe_unused atlas7_wdt_suspend(struct device *dev)
+{
+	/*
+	 * NOTE:timer controller registers settings are saved
+	 * and restored back by the timer-atlas7.c
+	 */
+	return 0;
+}
+
+static int __maybe_unused atlas7_wdt_resume(struct device *dev)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	/*
+	 * NOTE: Since timer controller registers settings are saved
+	 * and restored back by the timer-atlas7.c, so we need not
+	 * update WD settings except refreshing timeout.
+	 */
+	atlas7_wdt_ping(wdd);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atlas7_wdt_pm_ops,
+		atlas7_wdt_suspend, atlas7_wdt_resume);
+
+MODULE_DEVICE_TABLE(of, atlas7_wdt_ids);
+
+static struct platform_driver atlas7_wdt_driver = {
+	.driver = {
+		.name = "atlas7-wdt",
+		.pm = &atlas7_wdt_pm_ops,
+		.of_match_table	= atlas7_wdt_ids,
+	},
+	.probe = atlas7_wdt_probe,
+	.remove = atlas7_wdt_remove,
+	.shutdown = atlas7_wdt_shutdown,
+};
+module_platform_driver(atlas7_wdt_driver);
+
+MODULE_DESCRIPTION("CSRatlas7 watchdog driver");
+MODULE_AUTHOR("Guo Zeng <Guo.Zeng@csr.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:atlas7-wdt");

drivers/watchdog/bcm2835_wdt.c

@@ -79,7 +79,6 @@ static int bcm2835_wdt_stop(struct watchdog_device *wdog)
 	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
 
 	writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC);
-	dev_info(wdog->dev, "Watchdog timer stopped");
 	return 0;
 }
 

drivers/watchdog/bcm47xx_wdt.c

@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
-#include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <linux/timer.h>
@@ -88,12 +87,22 @@ static int bcm47xx_wdt_hard_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static int bcm47xx_wdt_restart(struct watchdog_device *wdd)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	wdt->timer_set(wdt, 1);
+
+	return 0;
+}
+
 static struct watchdog_ops bcm47xx_wdt_hard_ops = {
 	.owner		= THIS_MODULE,
 	.start		= bcm47xx_wdt_hard_start,
 	.stop		= bcm47xx_wdt_hard_stop,
 	.ping		= bcm47xx_wdt_hard_keepalive,
 	.set_timeout	= bcm47xx_wdt_hard_set_timeout,
+	.restart        = bcm47xx_wdt_restart,
 };
 
 static void bcm47xx_wdt_soft_timer_tick(unsigned long data)
@@ -158,34 +167,13 @@ static const struct watchdog_info bcm47xx_wdt_info = {
 				WDIOF_MAGICCLOSE,
 };
 
-static int bcm47xx_wdt_notify_sys(struct notifier_block *this,
-				  unsigned long code, void *unused)
-{
-	struct bcm47xx_wdt *wdt;
-
-	wdt = container_of(this, struct bcm47xx_wdt, notifier);
-	if (code == SYS_DOWN || code == SYS_HALT)
-		wdt->wdd.ops->stop(&wdt->wdd);
-	return NOTIFY_DONE;
-}
-
-static int bcm47xx_wdt_restart(struct notifier_block *this, unsigned long mode,
-			       void *cmd)
-{
-	struct bcm47xx_wdt *wdt;
-
-	wdt = container_of(this, struct bcm47xx_wdt, restart_handler);
-	wdt->timer_set(wdt, 1);
-
-	return NOTIFY_DONE;
-}
-
 static struct watchdog_ops bcm47xx_wdt_soft_ops = {
 	.owner		= THIS_MODULE,
 	.start		= bcm47xx_wdt_soft_start,
 	.stop		= bcm47xx_wdt_soft_stop,
 	.ping		= bcm47xx_wdt_soft_keepalive,
 	.set_timeout	= bcm47xx_wdt_soft_set_timeout,
+	.restart        = bcm47xx_wdt_restart,
 };
 
 static int bcm47xx_wdt_probe(struct platform_device *pdev)
@@ -214,32 +202,18 @@ static int bcm47xx_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_timer;
 	watchdog_set_nowayout(&wdt->wdd, nowayout);
-
-	wdt->notifier.notifier_call = &bcm47xx_wdt_notify_sys;
-
-	ret = register_reboot_notifier(&wdt->notifier);
-	if (ret)
-		goto err_timer;
-
-	wdt->restart_handler.notifier_call = &bcm47xx_wdt_restart;
-	wdt->restart_handler.priority = 64;
-	ret = register_restart_handler(&wdt->restart_handler);
-	if (ret)
-		goto err_notifier;
+	watchdog_set_restart_priority(&wdt->wdd, 64);
+	watchdog_stop_on_reboot(&wdt->wdd);
 
 	ret = watchdog_register_device(&wdt->wdd);
 	if (ret)
-		goto err_handler;
+		goto err_timer;
 
 	dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n",
 		timeout, nowayout ? ", nowayout" : "",
 		soft ? ", Software Timer" : "");
 	return 0;
 
-err_handler:
-	unregister_restart_handler(&wdt->restart_handler);
-err_notifier:
-	unregister_reboot_notifier(&wdt->notifier);
 err_timer:
 	if (soft)
 		del_timer_sync(&wdt->soft_timer);
@@ -255,7 +229,6 @@ static int bcm47xx_wdt_remove(struct platform_device *pdev)
 		return -ENXIO;
 
 	watchdog_unregister_device(&wdt->wdd);
-	unregister_reboot_notifier(&wdt->notifier);
 
 	return 0;
 }

drivers/watchdog/cadence_wdt.c

@@ -18,7 +18,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/reboot.h>
 #include <linux/watchdog.h>
 
 #define CDNS_WDT_DEFAULT_TIMEOUT	10
@@ -72,7 +71,6 @@ MODULE_PARM_DESC(nowayout,
  * @ctrl_clksel: counter clock prescaler selection
  * @io_lock: spinlock for IO register access
  * @cdns_wdt_device: watchdog device structure
- * @cdns_wdt_notifier: notifier structure
  *
  * Structure containing parameters specific to cadence watchdog.
  */
@@ -84,7 +82,6 @@ struct cdns_wdt {
 	u32			ctrl_clksel;
 	spinlock_t		io_lock;
 	struct watchdog_device	cdns_wdt_device;
-	struct notifier_block	cdns_wdt_notifier;
 };
 
 /* Write access to Registers */
@@ -280,29 +277,6 @@ static struct watchdog_ops cdns_wdt_ops = {
 	.set_timeout = cdns_wdt_settimeout,
 };
 
-/**
- * cdns_wdt_notify_sys - Notifier for reboot or shutdown.
- *
- * @this: handle to notifier block
- * @code: turn off indicator
- * @unused: unused
- * Return: NOTIFY_DONE
- *
- * This notifier is invoked whenever the system reboot or shutdown occur
- * because we need to disable the WDT before system goes down as WDT might
- * reset on the next boot.
- */
-static int cdns_wdt_notify_sys(struct notifier_block *this, unsigned long code,
-			       void *unused)
-{
-	struct cdns_wdt *wdt = container_of(this, struct cdns_wdt,
-					    cdns_wdt_notifier);
-	if (code == SYS_DOWN || code == SYS_HALT)
-		cdns_wdt_stop(&wdt->cdns_wdt_device);
-
-	return NOTIFY_DONE;
-}
-
 /************************Platform Operations*****************************/
 /**
  * cdns_wdt_probe - Probe call for the device.
@@ -360,6 +334,7 @@ static int cdns_wdt_probe(struct platform_device *pdev)
 	}
 
 	watchdog_set_nowayout(cdns_wdt_device, nowayout);
+	watchdog_stop_on_reboot(cdns_wdt_device);
 	watchdog_set_drvdata(cdns_wdt_device, wdt);
 
 	wdt->clk = devm_clk_get(&pdev->dev, NULL);
@@ -386,14 +361,6 @@ static int cdns_wdt_probe(struct platform_device *pdev)
 
 	spin_lock_init(&wdt->io_lock);
 
-	wdt->cdns_wdt_notifier.notifier_call = &cdns_wdt_notify_sys;
-	ret = register_reboot_notifier(&wdt->cdns_wdt_notifier);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "cannot register reboot notifier err=%d)\n",
-			ret);
-		goto err_clk_disable;
-	}
-
 	ret = watchdog_register_device(cdns_wdt_device);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to register wdt device\n");
@@ -427,7 +394,6 @@ static int cdns_wdt_remove(struct platform_device *pdev)
 
 	cdns_wdt_stop(&wdt->cdns_wdt_device);
 	watchdog_unregister_device(&wdt->cdns_wdt_device);
-	unregister_reboot_notifier(&wdt->cdns_wdt_notifier);
 	clk_disable_unprepare(wdt->clk);
 
 	return 0;
@@ -455,8 +421,7 @@ static void cdns_wdt_shutdown(struct platform_device *pdev)
  */
 static int __maybe_unused cdns_wdt_suspend(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct cdns_wdt *wdt = platform_get_drvdata(pdev);
 
 	cdns_wdt_stop(&wdt->cdns_wdt_device);
@@ -474,8 +439,7 @@ static int __maybe_unused cdns_wdt_suspend(struct device *dev)
 static int __maybe_unused cdns_wdt_resume(struct device *dev)
 {
 	int ret;
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct cdns_wdt *wdt = platform_get_drvdata(pdev);
 
 	ret = clk_prepare_enable(wdt->clk);

drivers/watchdog/da9052_wdt.c

@@ -31,7 +31,6 @@
 struct da9052_wdt_data {
 	struct watchdog_device wdt;
 	struct da9052 *da9052;
-	struct kref kref;
 	unsigned long jpast;
 };
 
@@ -51,10 +50,6 @@ static const struct {
 };
 
 
-static void da9052_wdt_release_resources(struct kref *r)
-{
-}
-
 static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
 				  unsigned int timeout)
 {
@@ -104,20 +99,6 @@ static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
 	return 0;
 }
 
-static void da9052_wdt_ref(struct watchdog_device *wdt_dev)
-{
-	struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
-
-	kref_get(&driver_data->kref);
-}
-
-static void da9052_wdt_unref(struct watchdog_device *wdt_dev)
-{
-	struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
-
-	kref_put(&driver_data->kref, da9052_wdt_release_resources);
-}
-
 static int da9052_wdt_start(struct watchdog_device *wdt_dev)
 {
 	return da9052_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
@@ -170,8 +151,6 @@ static const struct watchdog_ops da9052_wdt_ops = {
 	.stop = da9052_wdt_stop,
 	.ping = da9052_wdt_ping,
 	.set_timeout = da9052_wdt_set_timeout,
-	.ref = da9052_wdt_ref,
-	.unref = da9052_wdt_unref,
 };
 
 
@@ -198,8 +177,6 @@ static int da9052_wdt_probe(struct platform_device *pdev)
 	da9052_wdt->parent = &pdev->dev;
 	watchdog_set_drvdata(da9052_wdt, driver_data);
 
-	kref_init(&driver_data->kref);
-
 	ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
 				DA9052_CONTROLD_TWDSCALE, 0);
 	if (ret < 0) {
@@ -225,7 +202,6 @@ static int da9052_wdt_remove(struct platform_device *pdev)
 	struct da9052_wdt_data *driver_data = platform_get_drvdata(pdev);
 
 	watchdog_unregister_device(&driver_data->wdt);
-	kref_put(&driver_data->kref, da9052_wdt_release_resources);
 
 	return 0;
 }

drivers/watchdog/da9055_wdt.c

@@ -35,7 +35,6 @@ MODULE_PARM_DESC(nowayout,
 struct da9055_wdt_data {
 	struct watchdog_device wdt;
 	struct da9055 *da9055;
-	struct kref kref;
 };
 
 static const struct {
@@ -99,24 +98,6 @@ static int da9055_wdt_ping(struct watchdog_device *wdt_dev)
 				 DA9055_WATCHDOG_MASK, 1);
 }
 
-static void da9055_wdt_release_resources(struct kref *r)
-{
-}
-
-static void da9055_wdt_ref(struct watchdog_device *wdt_dev)
-{
-	struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
-
-	kref_get(&driver_data->kref);
-}
-
-static void da9055_wdt_unref(struct watchdog_device *wdt_dev)
-{
-	struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
-
-	kref_put(&driver_data->kref, da9055_wdt_release_resources);
-}
-
 static int da9055_wdt_start(struct watchdog_device *wdt_dev)
 {
 	return da9055_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
@@ -138,8 +119,6 @@ static const struct watchdog_ops da9055_wdt_ops = {
 	.stop = da9055_wdt_stop,
 	.ping = da9055_wdt_ping,
 	.set_timeout = da9055_wdt_set_timeout,
-	.ref = da9055_wdt_ref,
-	.unref = da9055_wdt_unref,
 };
 
 static int da9055_wdt_probe(struct platform_device *pdev)
@@ -165,8 +144,6 @@ static int da9055_wdt_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(da9055_wdt, nowayout);
 	watchdog_set_drvdata(da9055_wdt, driver_data);
 
-	kref_init(&driver_data->kref);
-
 	ret = da9055_wdt_stop(da9055_wdt);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to stop watchdog, %d\n", ret);
@@ -189,7 +166,6 @@ static int da9055_wdt_remove(struct platform_device *pdev)
 	struct da9055_wdt_data *driver_data = platform_get_drvdata(pdev);
 
 	watchdog_unregister_device(&driver_data->wdt);
-	kref_put(&driver_data->kref, da9055_wdt_release_resources);
 
 	return 0;
 }

drivers/watchdog/da9063_wdt.c

@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/mfd/da9063/registers.h>
 #include <linux/mfd/da9063/core.h>
-#include <linux/reboot.h>
 #include <linux/regmap.h>
 
 /*
@@ -39,7 +38,6 @@ static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
 struct da9063_watchdog {
 	struct da9063 *da9063;
 	struct watchdog_device wdtdev;
-	struct notifier_block restart_handler;
 };
 
 static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
@@ -121,12 +119,9 @@ static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
 	return ret;
 }
 
-static int da9063_wdt_restart_handler(struct notifier_block *this,
-				      unsigned long mode, void *cmd)
+static int da9063_wdt_restart(struct watchdog_device *wdd)
 {
-	struct da9063_watchdog *wdt = container_of(this,
-						   struct da9063_watchdog,
-						   restart_handler);
+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
 	int ret;
 
 	ret = regmap_write(wdt->da9063->regmap, DA9063_REG_CONTROL_F,
@@ -135,7 +130,7 @@ static int da9063_wdt_restart_handler(struct notifier_block *this,
 		dev_alert(wdt->da9063->dev, "Failed to shutdown (err = %d)\n",
 			  ret);
 
-	return NOTIFY_DONE;
+	return ret;
 }
 
 static const struct watchdog_info da9063_watchdog_info = {
@@ -149,6 +144,7 @@ static const struct watchdog_ops da9063_watchdog_ops = {
 	.stop = da9063_wdt_stop,
 	.ping = da9063_wdt_ping,
 	.set_timeout = da9063_wdt_set_timeout,
+	.restart = da9063_wdt_restart,
 };
 
 static int da9063_wdt_probe(struct platform_device *pdev)
@@ -179,6 +175,8 @@ static int da9063_wdt_probe(struct platform_device *pdev)
 
 	wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
 
+	watchdog_set_restart_priority(&wdt->wdtdev, 128);
+
 	watchdog_set_drvdata(&wdt->wdtdev, wdt);
 	dev_set_drvdata(&pdev->dev, wdt);
 
@@ -186,13 +184,6 @@ static int da9063_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	wdt->restart_handler.notifier_call = da9063_wdt_restart_handler;
-	wdt->restart_handler.priority = 128;
-	ret = register_restart_handler(&wdt->restart_handler);
-	if (ret)
-		dev_err(wdt->da9063->dev,
-			"Failed to register restart handler (err = %d)\n", ret);
-
 	return 0;
 }
 
@@ -200,8 +191,6 @@ static int da9063_wdt_remove(struct platform_device *pdev)
 {
 	struct da9063_watchdog *wdt = dev_get_drvdata(&pdev->dev);
 
-	unregister_restart_handler(&wdt->restart_handler);
-
 	watchdog_unregister_device(&wdt->wdtdev);
 
 	return 0;

drivers/watchdog/diag288_wdt.c

@@ -106,6 +106,10 @@ static int __diag288_lpar(unsigned int func, unsigned int timeout,
 	return __diag288(func, timeout, action, 0);
 }
 
+static unsigned long wdt_status;
+
+#define DIAG_WDOG_BUSY	0
+
 static int wdt_start(struct watchdog_device *dev)
 {
 	char *ebc_cmd;
@@ -113,12 +117,17 @@ static int wdt_start(struct watchdog_device *dev)
 	int ret;
 	unsigned int func;
 
+	if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status))
+		return -EBUSY;
+
 	ret = -ENODEV;
 
 	if (MACHINE_IS_VM) {
 		ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
-		if (!ebc_cmd)
+		if (!ebc_cmd) {
+			clear_bit(DIAG_WDOG_BUSY, &wdt_status);
 			return -ENOMEM;
+		}
 		len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN);
 		ASCEBC(ebc_cmd, MAX_CMDLEN);
 		EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
@@ -135,6 +144,7 @@ static int wdt_start(struct watchdog_device *dev)
 
 	if (ret) {
 		pr_err("The watchdog cannot be activated\n");
+		clear_bit(DIAG_WDOG_BUSY, &wdt_status);
 		return ret;
 	}
 	return 0;
@@ -146,6 +156,9 @@ static int wdt_stop(struct watchdog_device *dev)
 
 	diag_stat_inc(DIAG_STAT_X288);
 	ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0);
+
+	clear_bit(DIAG_WDOG_BUSY, &wdt_status);
+
 	return ret;
 }
 
@@ -220,17 +233,10 @@ static struct watchdog_device wdt_dev = {
  * It makes no sense to go into suspend while the watchdog is running.
  * Depending on the memory size, the watchdog might trigger, while we
  * are still saving the memory.
- * We reuse the open flag to ensure that suspend and watchdog open are
- * exclusive operations
  */
 static int wdt_suspend(void)
 {
-	if (test_and_set_bit(WDOG_DEV_OPEN, &wdt_dev.status)) {
-		pr_err("Linux cannot be suspended while the watchdog is in use\n");
-		return notifier_from_errno(-EBUSY);
-	}
-	if (test_bit(WDOG_ACTIVE, &wdt_dev.status)) {
-		clear_bit(WDOG_DEV_OPEN, &wdt_dev.status);
+	if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status)) {
 		pr_err("Linux cannot be suspended while the watchdog is in use\n");
 		return notifier_from_errno(-EBUSY);
 	}
@@ -239,7 +245,7 @@ static int wdt_suspend(void)
 
 static int wdt_resume(void)
 {
-	clear_bit(WDOG_DEV_OPEN, &wdt_dev.status);
+	clear_bit(DIAG_WDOG_BUSY, &wdt_status);
 	return NOTIFY_DONE;
 }