Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring: - Convert to use memblock_virt_alloc in DT code which supports bootmem arches. With this we can remove the arch specific early_init_dt_alloc_memory_arch() functions. - Enable running the DT unittests on UML - Use SPDX license tags on DT files - Fix early FDT kconfig ifdef logic - Clean-up unittest Makefile - Fix function comment for of_irq_parse_raw - Add missing documentation for linux,initrd-{start,end} properties - Clean-up of binding examples using uppercase hex - Add trivial devices W83773G and Infineon TLV493D-A1B6 - Add missing STM32 SoC bindings - Various small binding doc fixes * tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) xtensa: remove arch specific early DT functions x86: remove arch specific early_init_dt_alloc_memory_arch nios2: remove arch specific early_init_dt_alloc_memory_arch mips: remove arch specific early_init_dt_alloc_memory_arch metag: remove arch specific early DT functions cris: remove arch specific early DT functions libfdt: remove unnecessary include directive from <linux/libfdt.h> of: unittest: refactor Makefile of/fdt: use memblock_virt_alloc for early alloc of: Use SPDX license tag for DT files of/fdt: Fix #ifdef dependency of early flattree declarations dt-bindings: h8300 clocksource: correct spelling of pulse dt-bindings: imx6q-pcie: Add required property for i.MX6SX mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding dt-bindings: Use lower case hex in unit-addresses dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 dt-bindings: Add Infineon TLV493D-A1B6 dt-bindings: mailbox: ti,message-manager: Fix interrupt name error dt-bindings: chosen: Document linux,initrd-{start,end} dt-bindings: arm: document supported STM32 SoC family ...
2026-08-18 02:22:47 -07:00 · 2018-02-01 10:57:45 -08:00
commit 2bed26606b
@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree.

 Example: adding device info in dtsi file

-adc: adc@12D10000 {
+adc: adc@12d10000 {
 	compatible = "samsung,exynos-adc-v1";
 	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
@@ -71,7 +71,7 @@ adc: adc@12D10000 {

 Example: adding device info in dtsi file for Exynos3250 with additional sclk

-adc: adc@126C0000 {
+adc: adc@126c0000 {
 	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
 	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
@@ -87,7 +87,7 @@ adc: adc@126C0000 {

 Example: Adding child nodes in dts file

-adc@12D10000 {
+adc@12d10000 {

 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
@@ -72,7 +72,7 @@ Optional nodes:
        - compatible: only "samsung,secure-firmware" is currently supported
        - reg: address of non-secure SYSRAM used for communication with firmware

-	firmware@203F000 {
+	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x0203F000 0x1000>;
 	};
@@ -0,0 +1,9 @@
+STMicroelectronics STM32 Platforms Device Tree Bindings
+
+Each device tree must specify which STM32 SoC it uses,
+using one of the following compatible strings:
+
+  st,stm32f429
+  st,stm32f469
+  st,stm32f746
+  st,stm32h743
@@ -120,3 +120,18 @@ e.g.
 While this property does not represent a real hardware, the address
 and the size are expressed in #address-cells and #size-cells,
 respectively, of the root node.
+
+linux,initrd-start and linux,initrd-end
+---------------------------------------
+
+These properties hold the physical start and end address of an initrd that's
+loaded by the bootloader. Note that linux,initrd-start is inclusive, but
+linux,initrd-end is exclusive.
+e.g.
+
+/ {
+	chosen {
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+};
@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below.
 		#clock-cells = <1>;
 	};

-	cmu_dmc: clock-controller@105C0000 {
+	cmu_dmc: clock-controller@105c0000 {
 		compatible = "samsung,exynos3250-cmu-dmc";
 		reg = <0x105C0000 0x2000>;
 		#clock-cells = <1>;
@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the
 		peri clock controller. Refer to the standard clock bindings for
 		information about 'clocks' and 'clock-names' property.

-	serial@12C00000 {
+	serial@12c00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 146 0>;
@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock
 	   controller. Refer to the standard clock bindings for information
 	   about 'clocks' and 'clock-names' property.

-	serial@12C20000 {
+	serial@12c20000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 51 0>;
@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below.
 Example 3: UART controller node that consumes the clock generated by the clock
 	   controller.

-	serial_0: serial@14C10000 {
+	serial_0: serial@14c10000 {
 		compatible = "samsung,exynos5433-uart";
 		reg = <0x14C10000 0x100>;
 		interrupts = <0 421 0>;
@@ -75,7 +75,7 @@ Required properties:
 - clock-frequency: must be present in the i2c controller node.

 Example:
-atecc508a@C0 {
+atecc508a@c0 {
 	compatible = "atmel,atecc508a";
 	reg = <0xC0>;
 };
@@ -20,7 +20,7 @@ Optional properties:

 Example : NoC Probe nodes in Device Tree are listed below.

-	nocp_mem0_0: nocp@10CA1000 {
+	nocp_mem0_0: nocp@10ca1000 {
 		compatible = "samsung,exynos5420-nocp";
 		reg = <0x10CA1000 0x200>;
 	};
@@ -54,7 +54,7 @@ Video interfaces:

 Example:

-	dsi@11C80000 {
+	dsi@11c80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;
@@ -1,7 +1,7 @@
 Toshiba 8.9" WXGA (1280x768) TFT LCD panel

 Required properties:
- compatible: should be "toshiba,lt089ac29000.txt"
+- compatible: should be "toshiba,lt089ac29000"
 - power-supply: as specified in the base binding

 This binding is compatible with the simple-panel binding, which is specified
@@ -119,7 +119,7 @@ Example:
 / {
 	...

-	vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+	vtg_main_slave: sti-vtg-main-slave@fe85a800 {
 		compatible	= "st,vtg";
 		reg		= <0xfe85A800 0x300>;
 		interrupts	= <GIC_SPI 175 IRQ_TYPE_NONE>;
@@ -15,7 +15,7 @@ Optional properties:

 Example:

-	dma: dma-controller@801C0000 {
+	dma: dma-controller@801c0000 {
 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
 		reg = <0x801C0000 0x1000  0x40010000 0x800>;
 		reg-names = "base", "lcpa";
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt

 Example:

-	gpioa: gpio@FF140000 {
+	gpioa: gpio@ff140000 {
 		compatible = "abilis,tb10x-gpio";
 		interrupt-controller;
 		#interrupt-cells = <1>;
@@ -27,7 +27,7 @@ Optional properties:

 Example:

-gpio1: stp@E100BB0 {
+gpio1: stp@e100bb0 {
 	compatible = "lantiq,gpio-stp-xway";
 	reg = <0xE100BB0 0x40>;
 	#gpio-cells = <2>;
@@ -290,7 +290,7 @@ pins 50..69.

 Example 2:

-	gpio_pio_i: gpio-controller@14B0 {
+	gpio_pio_i: gpio-controller@14b0 {
 		#gpio-cells = <2>;
 		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
 		reg = <0x1480 0x18>;
@@ -54,7 +54,7 @@ Optional properties:


 Example:
-	i2c@12CA0000 {
+	i2c@12ca0000 {
 		compatible = "acme,some-i2c-device";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -11,7 +11,7 @@ Required properties:

 Examples:

-lpi2c7: lpi2c7@40A50000 {
+lpi2c7: lpi2c7@40a50000 {
 	compatible = "fsl,imx8dv-lpi2c";
 	reg = <0x40A50000 0x10000>;
 	interrupt-parent = <&intc>;
@@ -45,7 +45,7 @@ Optional Properties specific to linux:


 Example:
-	keypad@100A0000 {
+	keypad@100a0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <173>;