linux/linux-apfs
1
0 Fork 0
mirror of https://github.com/linux-apfs/linux-apfs.git synced 2026-08-18 02:22:47 -07:00
Code Issues Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse Source 
The conflicts were two cases of overlapping changes in
batman-adv and the qed driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller committed 2017-06-15 11:59:32 -04:00
2 parents f7aec129a3 a090bd4ff8
commit 0ddead90b2
451 files changed
+3855 -2255
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

Documentation/admin-guide/kernel-parameters.txt
+9
View File
@@ -866,6 +866,15 @@
dscc4.setup= [NET]
dt_cpu_ftrs= [PPC]
Format: {"off" | "known"}
Control how the dt_cpu_ftrs device-tree binding is
used for CPU feature discovery and setup (if it
exists).
off: Do not use it, fall back to legacy cpu table.
known: Do not pass through unknown features to guests
or userspace, only those that the kernel is aware of.
dump_apple_properties [X86]
Dump name and content of EFI device properties on
x86 Macs. Useful for driver authors to determine
Documentation/devicetree/bindings/usb/dwc2.txt
+1
View File
@@ -10,6 +10,7 @@ Required properties:
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
- "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
Documentation/networking/scaling.txt
+1 -1
View File
@@ -122,7 +122,7 @@ associated flow of the packet. The hash is either provided by hardware
or will be computed in the stack. Capable hardware can pass the hash in
the receive descriptor for the packet; this would usually be the same
hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
skb->rx_hash and can be used elsewhere in the stack as a hash of the
skb->hash and can be used elsewhere in the stack as a hash of the
packet’s flow.
Each receive hardware queue has an associated list of CPUs to which
MAINTAINERS
+11 -12
View File
@@ -1172,7 +1172,7 @@ N: clps711x
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Ryan Mallon <rmallon@gmail.com>
M: Alexander Sverdlin <alexander.sverdlin@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ep93xx/
@@ -1489,13 +1489,15 @@ M: Gregory Clement <gregory.clement@free-electrons.com>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mvebu/
F: drivers/rtc/rtc-armada38x.c
F: arch/arm/boot/dts/armada*
F: arch/arm/boot/dts/kirkwood*
F: arch/arm/configs/mvebu_*_defconfig
F: arch/arm/mach-mvebu/
F: arch/arm64/boot/dts/marvell/armada*
F: drivers/cpufreq/mvebu-cpufreq.c
F: arch/arm/configs/mvebu_*_defconfig
F: drivers/irqchip/irq-armada-370-xp.c
F: drivers/irqchip/irq-mvebu-*
F: drivers/rtc/rtc-armada38x.c
ARM/Marvell Berlin SoC support
M: Jisheng Zhang <jszhang@marvell.com>
@@ -1721,7 +1723,6 @@ N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
R: Javier Martinez Canillas <javier@osg.samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
@@ -1829,7 +1830,6 @@ F: drivers/edac/altera_edac.
ARM/STI ARCHITECTURE
M: Patrice Chotard <patrice.chotard@st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kernel@stlinux.com
W: http://www.stlinux.com
S: Maintained
F: arch/arm/mach-sti/
@@ -5622,7 +5622,7 @@ F: scripts/get_maintainer.pl
GENWQE (IBM Generic Workqueue Card)
M: Frank Haverkamp <haver@linux.vnet.ibm.com>
M: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
M: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
S: Supported
F: drivers/misc/genwqe/
@@ -5667,7 +5667,6 @@ F: tools/testing/selftests/gpio/
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
M: Alexandre Courbot <gnurou@gmail.com>
L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
S: Maintained
@@ -7708,7 +7707,7 @@ F: drivers/platform/x86/hp_accel.c
LIVE PATCHING
M: Josh Poimboeuf <jpoimboe@redhat.com>
M: Jessica Yu <jeyu@redhat.com>
M: Jessica Yu <jeyu@kernel.org>
M: Jiri Kosina <jikos@kernel.org>
M: Miroslav Benes <mbenes@suse.cz>
R: Petr Mladek <pmladek@suse.com>
@@ -8623,7 +8622,7 @@ S: Maintained
F: drivers/media/dvb-frontends/mn88473*
MODULE SUPPORT
M: Jessica Yu <jeyu@redhat.com>
M: Jessica Yu <jeyu@kernel.org>
M: Rusty Russell <rusty@rustcorp.com.au>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
S: Maintained
@@ -11311,7 +11310,6 @@ F: drivers/media/rc/serial_ir.c
STI CEC DRIVER
M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
L: kernel@stlinux.com
S: Maintained
F: drivers/staging/media/st-cec/
F: Documentation/devicetree/bindings/media/stih-cec.txt
@@ -11821,6 +11819,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
S: Supported
F: arch/arm/mach-davinci/
F: drivers/i2c/busses/i2c-davinci.c
F: arch/arm/boot/dts/da850*
TI DAVINCI SERIES MEDIA DRIVER
M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
@@ -13904,7 +13903,7 @@ S: Odd fixes
F: drivers/net/wireless/wl3501*
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
L: patches@opensource.cirrus.com
T: git https://github.com/CirrusLogic/linux-drivers.git
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
Makefile
+1 -1
View File
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 12
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc5
NAME = Fearless Coyote
# *DOCUMENTATION*
arch/arm/boot/dts/bcm283x.dtsi
+5
View File
@@ -3,6 +3,11 @@
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
/* firmware-provided startup stubs live here, where the secondary CPUs are
* spinning.
*/
/memreserve/ 0x00000000 0x00001000;
/* This include file covers the common peripherals and configuration between
* bcm2835 and bcm2836 implementations, leaving the CPU configuration to
* bcm2835.dtsi and bcm2836.dtsi.
arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+2 -2
View File
@@ -137,8 +137,8 @@ netcp: netcp@26000000 {
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
clock-names = "pa_clk", "ethss_clk", "cpts";
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,
arch/arm/boot/dts/keystone-k2l.dtsi
+8
View File
@@ -232,6 +232,14 @@
};
};
osr: sram@70000000 {
compatible = "mmio-sram";
reg = <0x70000000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&clkosr>;
};
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
arch/arm/boot/dts/versatile-pb.dts
+1 -1
View File
@@ -1,4 +1,4 @@
#include <versatile-ab.dts>
#include "versatile-ab.dts"
/ {
model = "ARM Versatile PB";
arch/arm/include/asm/device.h
+2 -1
View File
@@ -19,7 +19,8 @@ struct dev_archdata {
#ifdef CONFIG_XEN
const struct dma_map_ops *dev_dma_ops;
#endif
bool dma_coherent;
unsigned int dma_coherent:1;
unsigned int dma_ops_setup:1;
};
struct omap_device;
arch/arm/kvm/init.S
+2 -3
View File
@@ -104,7 +104,6 @@ __do_hyp_init:
@ - Write permission implies XN: disabled
@ - Instruction cache: enabled
@ - Data/Unified cache: enabled
@ - Memory alignment checks: enabled
@ - MMU: enabled (this code must be run from an identity mapping)
mrc p15, 4, r0, c1, c0, 0 @ HSCR
ldr r2, =HSCTLR_MASK
@@ -112,8 +111,8 @@ __do_hyp_init:
mrc p15, 0, r1, c1, c0, 0 @ SCTLR
ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
and r1, r1, r2
ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) )
THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) )
ARM( ldr r2, =(HSCTLR_M) )
THUMB( ldr r2, =(HSCTLR_M | HSCTLR_TE) )
orr r1, r1, r2
orr r0, r0, r1
mcr p15, 4, r0, c1, c0, 0 @ HSCR
arch/arm/mach-at91/Kconfig
+1
View File
@@ -1,6 +1,7 @@
menuconfig ARCH_AT91
bool "Atmel SoCs"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
select ARM_CPU_SUSPEND if PM
select COMMON_CLK_AT91
select GPIOLIB
select PINCTRL
arch/arm/mach-davinci/pm.c
+6 -1
View File
@@ -153,7 +153,8 @@ int __init davinci_pm_init(void)
davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
if (!davinci_sram_suspend) {
pr_err("PM: cannot allocate SRAM memory\n");
return -ENOMEM;
ret = -ENOMEM;
goto no_sram_mem;
}
davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
@@ -161,6 +162,10 @@ int __init davinci_pm_init(void)
suspend_set_ops(&davinci_pm_ops);
return 0;
no_sram_mem:
iounmap(pm_config.ddrpsc_reg_base);
no_ddrpsc_mem:
iounmap(pm_config.ddrpll_reg_base);
no_ddrpll_mem:
arch/arm/mm/dma-mapping.c
+14 -15
View File
@@ -2311,7 +2311,14 @@ int arm_iommu_attach_device(struct device *dev,
}
EXPORT_SYMBOL_GPL(arm_iommu_attach_device);
static void __arm_iommu_detach_device(struct device *dev)
/**
* arm_iommu_detach_device
* @dev: valid struct device pointer
*
* Detaches the provided device from a previously attached map.
* This voids the dma operations (dma_map_ops pointer)
*/
void arm_iommu_detach_device(struct device *dev)
{
struct dma_iommu_mapping *mapping;
@@ -2324,22 +2331,10 @@ static void __arm_iommu_detach_device(struct device *dev)
iommu_detach_device(mapping->domain, dev);
kref_put(&mapping->kref, release_iommu_mapping);
to_dma_iommu_mapping(dev) = NULL;
set_dma_ops(dev, NULL);
pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
}
/**
* arm_iommu_detach_device
* @dev: valid struct device pointer
*
* Detaches the provided device from a previously attached map.
* This voids the dma operations (dma_map_ops pointer)
*/
void arm_iommu_detach_device(struct device *dev)
{
__arm_iommu_detach_device(dev);
set_dma_ops(dev, NULL);
}
EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
@@ -2379,7 +2374,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
if (!mapping)
return;
__arm_iommu_detach_device(dev);
arm_iommu_detach_device(dev);
arm_iommu_release_mapping(mapping);
}
@@ -2430,9 +2425,13 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
dev->dma_ops = xen_dma_ops;
}
#endif
dev->archdata.dma_ops_setup = true;
}
void arch_teardown_dma_ops(struct device *dev)
{
if (!dev->archdata.dma_ops_setup)
return;
arm_teardown_iommu_dma_ops(dev);
}
arch/arm64/Kconfig
-4
View File
@@ -1084,10 +1084,6 @@ config SYSVIPC_COMPAT
def_bool y
depends on COMPAT && SYSVIPC
config KEYS_COMPAT
def_bool y
depends on COMPAT && KEYS
endmenu
menu "Power management options"
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+1 -2
View File
@@ -231,8 +231,7 @@
cpm_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
| IRQ_TYPE_LEVEL_HIGH)>,
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+1 -2
View File
@@ -221,8 +221,7 @@
cps_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
| IRQ_TYPE_LEVEL_HIGH)>,
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
arch/arm64/configs/defconfig
+10
View File
@@ -68,6 +68,7 @@ CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_RCAR=y
CONFIG_PCIE_ROCKCHIP=m
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_ARM64_VA_BITS_48=y
@@ -209,6 +210,8 @@ CONFIG_BRCMFMAC=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
@@ -264,6 +267,7 @@ CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_QUP=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
@@ -293,6 +297,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
@@ -301,12 +306,14 @@ CONFIG_RENESAS_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
@@ -474,8 +481,10 @@ CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_ROCKCHIP_SARADC=m
CONFIG_PWM=y
CONFIG_PWM_BCM2835=m
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_MESON=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
@@ -485,6 +494,7 @@ CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_ARM_SCPI_PROTOCOL=y
arch/arm64/include/asm/sysreg.h
+4
View File
@@ -286,6 +286,10 @@
#define SCTLR_ELx_A (1 << 1)
#define SCTLR_ELx_M 1
#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \
(1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \
(1 << 28) | (1 << 29))
#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
SCTLR_ELx_SA | SCTLR_ELx_I)
arch/arm64/kvm/hyp-init.S
+7 -4
View File
@@ -106,10 +106,13 @@ __do_hyp_init:
tlbi alle2
dsb sy
mrs x4, sctlr_el2
and x4, x4, #SCTLR_ELx_EE // preserve endianness of EL2
ldr x5, =SCTLR_ELx_FLAGS
orr x4, x4, x5
/*
* Preserve all the RES1 bits while setting the default flags,
* as well as the EE bit on BE. Drop the A flag since the compiler
* is allowed to generate unaligned accesses.
*/
ldr x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
CPU_BE( orr x4, x4, #SCTLR_ELx_EE)
msr sctlr_el2, x4
isb
Loaded 20 of 451 files, more files were not shown because too many files have changed in this diff. Show more