HPET_INTCAP is specific to TYPE_HPET, so define it there.
hpet.c doesn't need to include "hw/i386/pc.h" anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This conversion is pretty straight-forward. Standardized some formatting
so the +0 and +4 offset cases can recycle the same message.
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231118231129.2840388-1-dhoff749@gmail.com>
[PMD: Fixed few string formats]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, the one-shot (mode 1) PIT expires far too quickly,
due to the output being set under the wrong logic.
This change fixes the one-shot PIT mode to behave similarly to mode 0.
TESTED: using the one-shot PIT mode to calibrate a local apic timer.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Message-Id: <20230226015755.52624-1-damien@zamaudio.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 8137355e85 ("aspeed/timer: Fix behaviour running Linux")
introduced a MAX() expression to calculate the next timer deadline :
return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0));
The second MAX() is not necessary since the compared values are an
unsigned and 0. Simply remove it and fix warning :
../hw/timer/aspeed_timer.c: In function ‘calculate_next’:
../include/qemu/osdep.h:396:31: warning: declaration of ‘_a’ shadows a previous local [-Wshadow=compatible-local]
396 | typeof(1 ? (a) : (b)) _a = (a), _b = (b); \
| ^~
../hw/timer/aspeed_timer.c:170:12: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
../hw/timer/aspeed_timer.c:170:16: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
/home/legoater/work/qemu/qemu-aspeed.git/include/qemu/osdep.h:396:31: note: shadowed declaration is here
396 | typeof(1 ? (a) : (b)) _a = (a), _b = (b); \
| ^~
../hw/timer/aspeed_timer.c:170:12: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230922155924.1172019-5-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The nrf51_timer has a free-running counter which we implement using
the pattern of using two fields (update_counter_ns, counter) to track
the last point at which we calculated the counter value, and the
counter value at that time. Then we can find the current counter
value by converting the difference in wall-clock time between then
and now to a tick count that we need to add to the counter value.
Unfortunately the nrf51_timer's implementation of this has a bug
which means it loses time every time update_counter() is called.
After updating s->counter it always sets s->update_counter_ns to
'now', even though the actual point when s->counter hit the new value
will be some point in the past (half a tick, say). In the worst case
(guest code in a tight loop reading the counter, icount mode) the
counter is continually queried less than a tick after it was last
read, so s->counter never advances but s->update_counter_ns does, and
the guest never makes forward progress.
The fix for this is to only advance update_counter_ns to the
timestamp of the last tick, not all the way to 'now'. (This is the
pattern used in hw/misc/mps2-fpgaio.c's counter.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org
One of the debug printfs in exynos4210_gcomp_find() will
access outside the 's->g_timer.reg.comp[]' array if there
was no active comparator and 'res' is -1. Add a conditional
to avoid this.
This doesn't happen in normal use because the debug printfs
are by default not compiled in.
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Message-id: 20230404074506.112615-1-jiangfeng@kylinos.cn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Adjusted commit message to clarify that the overrun
only happens if you've enabled debug printfs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The expiration time provided for timer_mod() can overflow if a
ridiculously large value is set to the comparator register. The
resulting value can represent a past time after rounded, forcing the
timer to fire immediately. If the timer is configured as periodic, it
will rearm the timer again, and form an endless loop.
Check if the expiration value will overflow, and if it will, stop the
timer instead of rearming the timer with the overflowed time.
This bug was found by Alexander Bulekov when fuzzing igb, a new
network device emulation:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_2d7036941dcda1ad4380bb8a9174ed0c949bcefd
Fixes: 16b29ae180 ("Add HPET emulation to qemu (Beth Kon)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230131030037.18856-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid when refactoring unrelated headers:
hw/timer/hpet.c:776:39: error: array has incomplete element type 'Property' (aka 'struct Property')
static Property hpet_device_properties[] = {
^
hw/timer/hpet.c:777:5: error: implicit declaration of function 'DEFINE_PROP_UINT8' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
DEFINE_PROP_UINT8("timers", HPETState, num_timers, HPET_MIN_TIMERS),
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230215174353.37097-2-philmd@linaro.org>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER()
macro call, to avoid after a QOM refactor:
hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition
DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230109140306.23161-15-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix#1263 for CR writes
- rework compare time handling
- The compare timer has to run even if CR.OCIEN is not set,
as SR.OCIF must be updated.
- The compare timer fires exactly once when the
compare value is less than the current value, but the
reload values is less than the compare value.
- The compare timer will never fire if the reload value is
less than the compare value. Disable it in this case.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
[PMM: fixed minor style nits]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
