Since commit 5634622bcb ("file-posix: allow BLKZEROOUT with -t
writeback"), qemu-img create errors out on a Linux loop block device
with a 4 KB sector size:
# dd if=/dev/zero of=blockfile bs=1M count=1024
# losetup --sector-size 4096 /dev/loop0 blockfile
# qemu-img create -f raw /dev/loop0 1G
Formatting '/dev/loop0', fmt=raw size=1073741824
qemu-img: /dev/loop0: Failed to clear the new image's first sector: Invalid argument
Use the pwrite_zeroes_alignment block limit to avoid misaligned
fallocate(2) or ioctl(BLKZEROOUT) in the block/file-posix.c block
driver.
Cc: qemu-stable@nongnu.org
Fixes: 5634622bcb ("file-posix: allow BLKZEROOUT with -t writeback")
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/3127
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20251007141700.71891-3-stefanha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add IgvmNativeVpContextX64 struct holding the register state (see igvm
spec), and the qigvm_x86_load_context() function to load the register
state.
Wire up using two new functions: qigvm_x86_set_vp_context() is called
from igvm file handling code and stores the boot processor context.
qigvm_x86_bsp_reset() is called from i386 target cpu reset code and
loads the context into the cpu registers.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251029105555.2492276-5-kraxel@redhat.com>
Add and wire up qigvm_x86_get_mem_map_entry function which converts the
e820 table into an igvm memory map parameter. This makes igvm files for
the native (non-confidential) platform with memory map parameter work.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251029105555.2492276-4-kraxel@redhat.com>
Audio clean-ups
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCgA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmkEWqwcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5a4RD/49KcP8h/5+QT3nu703
# OL/c/+M0DEZCVikzbj1T+nZNlUZtto/wE1vY0/xxzoyMh/4XbUFI0b/YK8WcQyUx
# ozrWOCi6TquS1QpR62FBmDJ6QDA2KteTF8Zq/owdFj+l7VJ5F5mzcuuFCxLx1EVH
# 7qOIf37Vk4r8jz42CLRTusPGQZLSvS8LbTBP62guauXlVAKVWI8k9macRSqoTBRo
# VrQO3QC/JFSqkB2jGfes8AMU+RWLYPG3ICCf0UYHH/kMik/JEL+1arx7au7oukTb
# 3kp8cxGnuJzBKCvY8SLwQF3YiCotYQIjSkvAQrMYBXalPBjQIIh+vzegcF1D+xZb
# 6KR4kh3oXPHtVCG2AXcxA4IuAi50jYFPn6TgDkRrUAEhsOqOxLo5bmZsqWK7L3/u
# 61jLKSjLRSc+NjhwHN0YVy1ocdsLf2z1LQNHjC1TuxrgI//9fQnOE2gASb8tmJGg
# BlPYp5h6G50IEaACzlZEtudWpKRb/XyflWpHbWte0VUO9dpz/cUvO1P38CpPD1dr
# ohENb8eLn0L23M12tUABV0IoA729phBYh3Eua9uIzEVfuRVfoPCuocx6VxQked91
# SZr7X9G80Nyh5YYiMlrwpN8eDgPtKfW5JwI2wYME6clGLnf/catkqCl/qp4nQeG5
# LPZiFy5Krz+QuSq41DjcSWRD+g==
# =qTgA
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 Oct 2025 07:43:56 AM CET
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [unknown]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'audio-test-pull-request' of https://gitlab.com/marcandre.lureau/qemu: (36 commits)
audio: deprecate HMP audio commands
audio: Rename @endianness argument as @big_endian for clarity
audio: Remove pointless local variables
audio: drop needless audio_driver "descr" field
audio: move capture API to own header
audio: cleanup, use bool for booleans
audio: remove dependency on spice header
audio: move audio.h under include/qemu/
audio/dbus: use a helper function to set the backend dbus server
audio: remove QEMUSoundCard
audio: rename AudioState -> AudioBackend
audio: move internal APIs to audio_int.h
audio/replay: fix type punning
audio: introduce AUD_set_volume_{in,out}_lr()
audio: remove AUDIO_HOST_ENDIANNESS
audio: remove some needless headers
audio: initialize card_head during object init
audio: register and unregister vmstate with AudioState
audio: keep vmstate handle with AudioState
audio: drop needless error message
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not expose ARM specific fields to X86 implementation,
allowing to use the proper 'hv_vcpu_exit_t' type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call hv_vcpu_destroy() to destroy our vCPU context.
As hv_vcpu_destroy() must be called by the owning thread,
document hvf_arch_vcpu_destroy() also does.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since hvf_arch_update_guest_debug() calls hvf_arch_set_traps()
and hvf_arch_update_guest_debug(), which must run on a vCPU, it
also must. Mention it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hvf_arch_init_vcpu(), along with hvf_put_guest_debug_registers()
and hvf_put_gdbstub_debug_registers(), calls hv_vcpu_set_sys_reg(),
which must run on a vCPU. Mention they also must.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hvf_put_registers() and hvf_get_registers() are implemented per
target, rename them using the 'hvf_arch_' prefix following the
per target pattern.
Since they call hv_vcpu_set_reg() / hv_vcpu_get_reg(), mention
they must be called on the vCPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hvf_vcpu_exec() is implemented per target, rename it as
hvf_arch_vcpu_exec(), following the per target pattern.
Since it calls hv_vcpu_run(), mention it must be called
on the vCPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SPDM maybe used over different transports. This patch specifies the
trasnport types as an enum with a qdev property definition such that
a user input transport type (string) can be mapped directly into the
respective SPDM transportenum for internal use.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This header contains the transport encoding for an SPDM message that
uses the SPDM over Storage transport as defined by the DMTF DSP0286.
Note that in the StorageSpdmTransportHeader structure, security_protocol
field is defined in the SCSI Primary Commands 5 (SPC-5) specification.
The NVMe specification also refers to the SPC-5 for this definition.
The security_protocol_specific field is defined in DSP0286 and is
referred to as SP Specific for NVMe and ATA.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This is to support uni-directional transports such as SPDM over Storage.
As specified by the DMTF DSP0286.
Also update spdm_socket_rsp() to use the new send()/receive() functions. For
the case of spdm_socket_receive(), this allows us to do error checking
in one place with the addition of spdm_socket_command_valid().
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
QEMU maps certain regions into the guest multiple times, as seen in the
trace below. Currently the MSHV kernel driver will reject those
mappings. To workaround this, a record is kept (a static global list of
"slots", inspired by what the HVF accelerator has implemented). An
overlapping region is not registered at the hypervisor, and marked as
mapped=false. If there is an UNMAPPED_GPA exit, we can look for a slot
that is unmapped and would cover the GPA. In this case we map out the
conflicting slot and map in the requested region.
mshv_set_phys_mem add=1 name=pc.bios
mshv_map_memory => u_a=7ffff4e00000 gpa=00fffc0000 size=00040000
mshv_set_phys_mem add=1 name=ioapic
mshv_set_phys_mem add=1 name=hpet
mshv_set_phys_mem add=0 name=pc.ram
mshv_unmap_memory u_a=7fff67e00000 gpa=0000000000 size=80000000
mshv_set_phys_mem add=1 name=pc.ram
mshv_map_memory u_a=7fff67e00000 gpa=0000000000 size=000c0000
mshv_set_phys_mem add=1 name=pc.rom
mshv_map_memory u_a=7ffff4c00000 gpa=00000c0000 size=00020000
mshv_set_phys_mem add=1 name=pc.bios
mshv_remap_attempt => u_a=7ffff4e20000 gpa=00000e0000 size=00020000
The mapping table is guarded by a mutex for concurrent modification and
RCU mechanisms for concurrent reads. Writes occur rarely, but we'll have
to verify whether an unmapped region exist for each UNMAPPED_GPA exit,
which happens frequently.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250916164847.77883-24-magnuskulke@linux.microsoft.com
[Fix format strings for trace-events; mshv.h/mshv_int.h split. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
