Adds the IBM PPE42 family of 32-bit processors supporting
the PPE42, PPE42X and PPE42XM processor versions. These
processors are used as embedded processors in the IBM
Power9, Power10 and Power12 processors for various
tasks. It is basically a stripped down version of the
IBM PowerPC 405 processor, with some added instructions
for handling 64-bit loads and stores.
For more information on the PPE 42 processor please visit:
https://wiki.raptorcs.com/w/images/a/a3/PPE_42X_Core_Users_Manual.pdf
Supports PPE42 SPR's (Including the MSR).
Does not yet support exceptions, new PPE42 instructions and
does not prevent access to some invalid instructions and
registers (currently allows access to invalid GPR's and CR
fields).
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-3-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-3-milesg@linux.ibm.com>
Linux power management code accesses these registers for pstate
management. Wire up a very simple implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
After OCC fixes in QEMU pnv model and skiboot (since they have suffered
some bitrot), Linux will start performing PM SPR accesses. This is a
very simple implementation that makes it a bit happier.
Thanks,
Nick
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TB compile flags, tb_page_addr_t type, tb_cflags() and few
other methods are defined in "exec/translation-block.h".
All these files don't include "exec/translation-block.h" but
include "exec/exec-all.h" which include it. Explicitly include
"exec/translation-block.h" to be able to remove it from
"exec/exec-all.h" later when it won't be necessary. Otherwise
we'd get errors such:
accel/tcg/internal-target.h:59:20: error: a parameter list without types is only allowed in a function definition
59 | void tb_lock_page0(tb_page_addr_t);
| ^
accel/tcg/tb-hash.h:64:23: error: unknown type name 'tb_page_addr_t'
64 | uint32_t tb_hash_func(tb_page_addr_t phys_pc, vaddr pc,
| ^
accel/tcg/tcg-accel-ops.c:62:36: error: use of undeclared identifier 'CF_CLUSTER_SHIFT'
62 | cflags = cpu->cluster_index << CF_CLUSTER_SHIFT;
| ^
accel/tcg/watchpoint.c:102:47: error: use of undeclared identifier 'CF_NOIRQ'
102 | cpu->cflags_next_tb = 1 | CF_NOIRQ | curr_cflags(cpu);
| ^
target/i386/helper.c:536:28: error: use of undeclared identifier 'CF_PCREL'
536 | if (tcg_cflags_has(cs, CF_PCREL)) {
| ^
target/rx/cpu.c:51:21: error: incomplete definition of type 'struct TranslationBlock'
51 | cpu->env.pc = tb->pc;
| ~~^
system/physmem.c:2977:9: error: call to undeclared function 'tb_invalidate_phys_range'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
2977 | tb_invalidate_phys_range(addr, addr + length - 1);
| ^
plugins/api.c:96:12: error: call to undeclared function 'tb_cflags'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
96 | return tb_cflags(tcg_ctx->gen_tb) & CF_MEMI_ONLY;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-5-philmd@linaro.org>
divdu (without a dot) sometimes updates cr0, even though it shouldn't.
The reason is that gen_op_arith_divd() checks Rc(ctx->opcode), which is
not initialized. This field is initialized only for instructions that
go through decode_legacy(), and not decodetree.
There already was a similar issue fixed in commit 86e6202a57
("target/ppc: Make divw[u] handler method decodetree compatible.").
It's not immediately clear what else may access the uninitialized
ctx->opcode, so instead of playing whack-a-mole and changing the check
to compute_rc0, simply initialize ctx->opcode.
Cc: qemu-stable@nongnu.org
Fixes: 99082815f1 ("target/ppc: Add infrastructure for prefixed insns")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Those functions are used to ld/st data to and from Altivec registers,
in 64 bits chunks, and are only used in vmx-impl.c.inc file,
hence the clean-up movement.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l, st}xvl(l) : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also added a new function do_ea_calc_ra to calculate the effective address :
EA <- (RA == 0) ? 0 : GPR[RA], which is now used by the above-said insns,
and shall be used later by (p){lx, stx}vp insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: Fix 32-bit build]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Merge the two and pass the mmu_idx directly from translation.
Swap the argument order in dcbz_common to avoid extra swaps.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can determine at translation time whether the insn is or
is not dbczl. We must retain a runtime check against the
HID5 register, but we can move that to a separate function
that never affects other ppc models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the POWER SPRC/SPRD SPRs, and SCRATCH0-7 registers that
can be accessed via these indirect SPRs.
SCRATCH registers only provide storage, but they are used by firmware
for low level crash and progress data, so this implementation logs
writes to the registers to help with analysis.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
An SPR can be either per-thread, per-core, or per-LPAR. Per-LPAR means
per-thread or per-core, depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use DEF_MEMOP() consistently in larx and stcx. generation, and apply it
once when it's used rather than where the macros are expanded, to reduce
typing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
