Combine 3 different pointer returns into one structure return.
Include a cflags field in TCGTBCPUState, not filled in by
cpu_get_tb_cpu_state, but used by all callers. This fills
a hole in the structure and is useful in some subroutines.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For some targets, simply remove the local definition.
For other targets, move the inline definition out of line.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
Currently we compile-time set an 'm68k_denormal' flag in the FloatFmt
for floatx80 for m68k. This controls our handling of what the Intel
documentation calls a "pseudo-denormal": a value where the exponent
field is zero and the explicit integer bit is set.
For x86, the x87 FPU is supposed to accept a pseudo-denormal as
input, but never generate one on output. For m68k, these values are
permitted on input and may be produced on output.
Replace the flag in the FloatFmt with a flag indicating whether the
float format has an explicit bit (which will be true for floatx80 for
all targets, and false for every other float type). Then we can gate
the handling of these pseudo-denormals on the setting of a
floatx80_behaviour flag.
As far as I can see from the code we don't actually handle the
x86-mandated "accept on input but don't generate" behaviour, because
the handling in partsN(canonicalize) looked at fmt->m68k_denormal.
So I have added TODO comments to that effect.
This commit doesn't change any behaviour for any target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250224111524.1101196-9-peter.maydell@linaro.org
Message-id: 20250217125055.160887-7-peter.maydell@linaro.org
Because floatx80 has an explicit integer bit, this permits some
odd encodings where the integer bit is not set correctly for the
floating point value type. In In Intel terminology the
categories are:
exp == 0, int = 0, mantissa == 0 : zeroes
exp == 0, int = 0, mantissa != 0 : denormals
exp == 0, int = 1 : pseudo-denormals
0 < exp < 0x7fff, int = 0 : unnormals
0 < exp < 0x7fff, int = 1 : normals
exp == 0x7fff, int = 0, mantissa == 0 : pseudo-infinities
exp == 0x7fff, int = 1, mantissa == 0 : infinities
exp == 0x7fff, int = 0, mantissa != 0 : pseudo-NaNs
exp == 0x7fff, int = 1, mantissa == 0 : NaNs
The usual IEEE cases of zero, denormal, normal, inf and NaN are always valid.
x87 permits as input also pseudo-denormals.
m68k permits all those and also pseudo-infinities, pseudo-NaNs and unnormals.
Currently we have an ifdef in floatx80_invalid_encoding() to select
the x86 vs m68k behaviour. Add new floatx80_behaviour flags to
select whether pseudo-NaN and unnormal are valid, and use these
(plus the existing pseudo_inf_valid flag) to decide whether these
encodings are invalid at runtime.
We leave pseudo-denormals as always-valid, since both x86 and m68k
accept them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250224111524.1101196-8-peter.maydell@linaro.org
Message-id: 20250217125055.160887-6-peter.maydell@linaro.org
In Intel terminology, a floatx80 Infinity with the explicit integer
bit clear is a "pseudo-infinity"; for x86 these are not valid
infinity values. m68k is looser and does not care whether the
Integer bit is set or clear in an infinity.
Move this setting to runtime rather than using an ifdef in
floatx80_is_infinity().
Since this was the last use of the floatx80_infinity global constant,
we remove it and its definition here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250224111524.1101196-6-peter.maydell@linaro.org
Message-id: 20250217125055.160887-5-peter.maydell@linaro.org
Currently we hardcode at compile time whether the floatx80 default
Infinity value has the explicit integer bit set or not (x86 sets it;
m68k does not). To be able to compile softfloat once for all targets
we'd like to move this setting to runtime.
Define a new FloatX80Behaviour enum which is a set of flags that
define the target's floatx80 handling. Initially we define just one
flag, for whether the default Infinity has the Integer bit set or
not, but we will expand this in future commits to cover the other
floatx80 target specifics that we currently make compile-time
settings.
Define a new function floatx80_default_inf() which returns the
appropriate default Infinity value of the given sign, and use it in
the code that was previously directly using the compile-time constant
floatx80_infinity_{low,high} values when packing an infinity into a
floatx80.
Since floatx80 is highly unlikely to be supported in any new
architecture, and the existing code is generally written as "default
to like x87, with an ifdef for m68k", we make the default value for
the floatx80 behaviour flags be "what x87 does". This means we only
need to change the m68k target to specify the behaviour flags.
(Other users of floatx80 are the Arm NWFPE emulation, which is
obsolete and probably not actually doing the right thing anyway, and
the PPC xsrqpxp insn. Making the default be "like x87" avoids our
needing to review and test for behaviour changes there.)
We will clean up the remaining uses of the floatx80_infinity global
constant in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250224111524.1101196-2-peter.maydell@linaro.org
Message-id: 20250217125055.160887-2-peter.maydell@linaro.org
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL)
to get the NaN bit pattern to reset the FPU registers. This
works because it happens that our implementation of
floatx80_default_nan() doesn't actually look at the float_status
pointer except for TARGET_MIPS. However, this isn't guaranteed,
and to be able to remove the ifdef in floatx80_default_nan()
we're going to need a real float_status here.
Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status
earlier, and thus can pass it to floatx80_default_nan().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-28-peter.maydell@linaro.org
Explicitly set the 2-NaN propagation rule on env->fp_status
and on the temporary fp_status that we use in frem (since
we pass that to a division operation function).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently the TCGCPUOps::cpu_exec_halt method is optional, and if it
is not set then the default is to call the CPUClass::has_work
method (which has an identical function signature).
We would like to make the cpu_exec_halt method mandatory so we can
remove the runtime check and fallback handling. In preparation for
that, make all the targets which don't need special handling in their
cpu_exec_halt set it to their cpu_has_work implementation instead of
leaving it unset. (This is every target except for arm and i386.)
In the riscv case this requires us to make the function not
be local to the source file it's defined in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
