uint8_t is good enough to hold a property "between 0 and 0xff".
Define pullups/pulldowns properties using DEFINE_PROP_UINT8()
macro, remove unnecessary range checks in pl061_realize().
Update the two caller sites.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added 32 bits property for ASPEED GPIO. Previously it can only be
access in bitwise manner.
The changes to qobject is to index gpios with array indices on top of
accessing with registers. This allows for easier gpio access,
especially in tests with complex behaviors that requires large number
of gpios at a time, like fault injection and networking behaviors.
Indexing multiple gpios at once allows qmp/side band client to no
longer hardcode and populate register names and manipulate them
faster.
Signed-off-by: Felix Wu <flwu@google.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/qemu-devel/20251015011830.1688468-2-lixiaoyan@google.com
[ clg: wrapped commit log lines ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In pca9554_set_pin() we have a string property which we parse in
order to set some non-string fields in the device state. So we call
visit_type_str(), passing it the address of the local variable
state_str.
visit_type_str() will allocate a new copy of the string; we
never free this string, so the result is a memory leak, detected
by ASAN during a "make check" run:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x5d605212ede3 in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/qemu-system-arm+0x21f1de3) (
BuildId: 3d5373c89317f58bfcd191a33988c7347714be14)
#1 0x7f7edea57b09 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x62b09) (BuildId: 1eb6131419edb83b2178b68282
9a6913cf682d75)
#2 0x7f7edea6d4d8 in g_strdup (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x784d8) (BuildId: 1eb6131419edb83b2178b68282
9a6913cf682d75)
#3 0x5d6055289a91 in g_strdup_inline /usr/include/glib-2.0/glib/gstrfuncs.h:321:10
#4 0x5d6055289a91 in qobject_input_type_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../qapi/qo
bject-input-visitor.c:542:12
#5 0x5d605528479c in visit_type_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../qapi/qapi-visit
-core.c:349:10
#6 0x5d60528bdd87 in pca9554_set_pin /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../hw/gpio/pca9554.c:179:10
#7 0x5d60549bcbbb in object_property_set /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../qom/object.c:1450:5
#8 0x5d60549d2055 in object_property_set_qobject /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../qom/qom-qobject.c:28:10
#9 0x5d60549bcdf1 in object_property_set_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../qom/object.c:1458:15
#10 0x5d605439d077 in gb200nvl_bmc_i2c_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../hw/arm/aspeed.c:1267:5
#11 0x5d60543a3bbc in aspeed_machine_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-asan/../../hw/arm/aspeed.c:493:9
Make the state_str g_autofree, so that we will always free
it, on both error-exit and success codepaths.
Cc: qemu-stable@nongnu.org
Fixes: de0c7d543b ("misc: Add a pca9554 GPIO device model")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250821154459.2417976-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In hw/arm and include/hw/arm, some source files for the OMAP SoC
and the sx1 boards that are our only remaining OMAP boards still
have hard-coded tabs (almost entirely used for the indent on
inline comments, not for actual code indent).
Replace the tabs with spaces using vim :retab. I used 4 spaces
except in some defines and comments where I tried to put
everything aligned in the same column for better readability.
This commit is a purely whitespace-only change.
Signed-off-by: Santiago Monserrat Campanello <santimonserr@gmail.com>
Message-id: 20250505131130.82206-1-santimonserr@gmail.com
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/373
[PMM: expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the i.MX 8M Plus reference manual, a GPIO pin is
configured as an output when the corresponding bit in the GDIR
register is set. The function imx_gpio_set_int_line() is intended to
be a no-op if the pin is configured as an output, returning early in
such cases. However, it inverts the condition. Fix this by
returning early when the bit is set.
cc: qemu-stable@nongnu.org
Fixes: f442728097 ("i.MX: Add GPIO device")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250501183445.2389-4-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coccinelle's indentation of virt_create_plic() results in a long line.
Avoid that by mimicking the old indentation manually.
Don't touch tests/tcg/mips/user/. I'm not sure these files are ours
to make style cleanups on. They might be imported third-party code,
which we should leave as is to not complicate future updates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Accel & Exec patch queue
- Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander)
- Add '-d invalid_mem' logging option (Zoltan)
- Create QOM containers explicitly (Peter)
- Rename sysemu/ -> system/ (Philippe)
- Re-orderning of include/exec/ headers (Philippe)
Move a lot of declarations from these legacy mixed bag headers:
. "exec/cpu-all.h"
. "exec/cpu-common.h"
. "exec/cpu-defs.h"
. "exec/exec-all.h"
. "exec/translate-all"
to these more specific ones:
. "exec/page-protection.h"
. "exec/translation-block.h"
. "user/cpu_loop.h"
. "user/guest-host.h"
. "user/page-protection.h"
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t
# wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt
# KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K
# A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8
# 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe///
# 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r
# xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl
# VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay
# ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP
# 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd
# +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6
# x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo=
# =cjz8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Dec 2024 11:45:20 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits)
util/qemu-timer: fix indentation
meson: Do not define CONFIG_DEVICES on user emulation
system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header
system/numa: Remove unnecessary 'exec/cpu-common.h' header
hw/xen: Remove unnecessary 'exec/cpu-common.h' header
target/mips: Drop left-over comment about Jazz machine
target/mips: Remove tswap() calls in semihosting uhi_fstat_cb()
target/xtensa: Remove tswap() calls in semihosting simcall() helper
accel/tcg: Un-inline translator_is_same_page()
accel/tcg: Include missing 'exec/translation-block.h' header
accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h'
accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h'
qemu/coroutine: Include missing 'qemu/atomic.h' header
exec/translation-block: Include missing 'qemu/atomic.h' header
accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h'
exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined
target/sparc: Move sparc_restore_state_to_opc() to cpu.c
target/sparc: Uninline cpu_get_tb_cpu_state()
target/loongarch: Declare loongarch_cpu_dump_state() locally
user: Move various declarations out of 'exec/exec-all.h'
...
Conflicts:
hw/char/riscv_htif.c
hw/intc/riscv_aplic.c
target/s390x/cpu.c
Apply sysemu header path changes to not in the pull request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
AST2700 integrates two set of Parallel GPIO Controller with maximum 212
control pins, which are 27 groups. (H, exclude pin: H7 H6 H5 H4)
In the previous design of ASPEED SOCs, one register is used for setting
one function for one set which are 32 pins and 4 groups.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change since AST2700.
Each GPIO pin has their own individual control register.
In other words, users are able to set one GPIO pin’s direction,
interrupt enable, input mask and so on in the same one register.
Currently, aspeed_gpio_read and aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce new aspeed_gpio_2700_read and aspeed_gpio_2700_write callback
functions and aspeed_gpio_2700_ops memory region operation for AST2700.
Introduce a new ast2700 class to support AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The interrupt status field is W1C, where a set bit on read indicates an
interrupt is pending. If the bit extracted from data is set it should
clear the corresponding bit in reg_value. However, if the extracted
bit is clear then the value of the corresponding bit in reg_value
should be unchanged.
SHARED_FIELD_EX32() extracts the interrupt status bit from the write
(data). reg_value is set to the set's interrupt status, which means
that for any pin with an interrupt pending, the corresponding bit is
set. The deposit32() call updates the bit at pin_idx in the
reg_value, using the value extracted from the write (data).
The result is that if multiple interrupt status bits
were pending and the write was acknowledging specific one bit,
then the all interrupt status bits will be cleared.
However, it is index mode and should only clear the corresponding bit.
For example, say we have an interrupt pending for GPIOA0, where the
following statements are true:
set->int_status == 0b01
s->pending == 1
Before it is acknowledged, an interrupt becomes pending for GPIOA1:
set->int_status == 0b11
s->pending == 2
A write is issued to acknowledge the interrupt for GPIOA0. This causes
the following sequence:
reg_value == 0b11
pending == 2
s->pending == 0
set->int_status == 0b00
It should only clear bit 0 in index mode and the correct result
should be as following.
set->int_status == 0b11
s->pending == 2
pending == 1
s->pending == 1
set->int_status == 0b10
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Suggested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
It set "aspeed_gpio_ops" struct which containing read and write callbacks
to be used when I/O is performed on the GPIO region.
Besides, in the previous design of ASPEED SOCs, one register is used for
setting one function for 32 GPIO pins.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change in AST2700.
Each GPIO pin has their own control register. In other words, users are able to
set one GPIO pin’s direction, interrupt enable, input mask and so on
in one register. The aspeed_gpio_read/aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce a new "const MemoryRegionOps *" attribute in AspeedGPIOClass and
use it in aspeed_gpio_realize function.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs, a GPIO controller owns 4KB of
register space for AST2700, AST2500, AST2400 and AST1030; owns 2KB of
register space for AST2600 1.8v and owns 2KB of register space for
AST2600 3.3v.
It set the memory region size 2KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the GPIO controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The MAX7310 GPIO controller was used only by the XScale-based Zaurus
machine types. Now they have been removed we can remove this device
model as well.
Because this device is an I2C device, in theory it could be created
by users on the command line for boards with a different I2c
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs/outputs.
The only example a web search produces for "device max7310" is a user
trying to create this because they didn't realize that there was no
way to manipulate the GPIO lines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-3-peter.maydell@linaro.org
