typofixes - v4

Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

disas/i386.c

@@ -357,7 +357,7 @@ fetch_data(struct disassemble_info *info, bfd_byte *addr)
 #define Rd { OP_R, d_mode }
 #define Rm { OP_R, m_mode }
 #define Ib { OP_I, b_mode }
-#define sIb { OP_sI, b_mode }	/* sign extened byte */
+#define sIb { OP_sI, b_mode }	/* sign extended byte */
 #define Iv { OP_I, v_mode }
 #define Iq { OP_I, q_mode }
 #define Iv64 { OP_I64, v_mode }

disas/s390.c

@@ -613,7 +613,7 @@ static const struct s390_operand s390_operands[] =
       names of the instruction format that you can find in the principals
       of operation.
    2) the last part of the definition (y in INSTR_x_y) gives you an idea
-      which operands the binary represenation of the instruction has.
+      which operands the binary representation of the instruction has.
       The meanings of the letters in y are:
       a - access register
       c - control register
@@ -627,7 +627,7 @@ static const struct s390_operand s390_operands[] =
       m - mode field, 4 bit
       0 - operand skipped.
       The order of the letters reflects the layout of the format in
-      storage and not the order of the paramaters of the instructions.
+      storage and not the order of the parameters of the instructions.
       The use of the letters is not a 100% match with the PoP but it is
       quite close.
 

docs/specs/ppc-spapr-hcalls.txt

@@ -41,8 +41,8 @@ When the guest runs in "real mode" (in powerpc lingua this means
 with MMU disabled, ie guest effective == guest physical), it only
 has access to a subset of memory and no IOs.
 
-PAPR provides a set of hypervisor calls to perform cachable or
-non-cachable accesses to any guest physical addresses that the
+PAPR provides a set of hypervisor calls to perform cacheable or
+non-cacheable accesses to any guest physical addresses that the
 guest can use in order to access IO devices while in real mode.
 
 This is typically used by the firmware running in the guest.

docs/writing-qmp-commands.txt

@@ -122,7 +122,7 @@ There are a few things to be noticed:
 Now a little hack is needed. As we're still using the old QMP server we need
 to add the new command to its internal dispatch table. This step won't be
 required in the near future. Open the qmp-commands.hx file and add the
-following in the botton:
+following at the bottom:
 
     {
         .name       = "hello-world",

hw/audio/fmopl.c

@@ -1177,7 +1177,7 @@ void OPLResetChip(FM_OPL *OPL)
 	OPLWriteReg(OPL,0x03,0); /* Timer2 */
 	OPLWriteReg(OPL,0x04,0); /* IRQ mask clear */
 	for(i = 0xff ; i >= 0x20 ; i-- ) OPLWriteReg(OPL,i,0);
-	/* reset OPerator paramater */
+	/* reset operator parameter */
 	for( c = 0 ; c < OPL->max_ch ; c++ )
 	{
 		OPL_CH *CH = &OPL->P_CH[c];

hw/core/qdev.c

@@ -506,7 +506,7 @@ qemu_irq qdev_get_gpio_out_connector(DeviceState *dev, const char *name, int n)
     return ret;
 }
 
-/* disconnect a GPIO ouput, returning the disconnected input (if any) */
+/* disconnect a GPIO output, returning the disconnected input (if any) */
 
 static qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
                                                const char *name, int n)

hw/cris/axis_dev88.c

@@ -138,7 +138,7 @@ static void tempsensor_clkedge(struct tempsensor_t *s,
                     s->count = 16;
 
                     if ((s->regs[0] & 0xff) == 0) {
-                        /* 25 degrees celcius.  */
+                        /* 25 degrees celsius.  */
                         s->shiftreg = 0x0b9f;
                     } else if ((s->regs[0] & 0xff) == 0xff) {
                         /* Sensor ID, 0x8100 LM70.  */

hw/display/qxl-render.c

@@ -159,7 +159,7 @@ static void qxl_render_update_area_unlocked(PCIQXLDevice *qxl)
 /*
  * use ssd.lock to protect render_update_cookie_num.
  * qxl_render_update is called by io thread or vcpu thread, and the completion
- * callbacks are called by spice_server thread, defering to bh called from the
+ * callbacks are called by spice_server thread, deferring to bh called from the
  * io thread.
  */
 void qxl_render_update(PCIQXLDevice *qxl)

hw/dma/xilinx_axidma.c

@@ -133,7 +133,7 @@ struct XilinxAXIDMA {
 };
 
 /*
- * Helper calls to extract info from desriptors and other trivial
+ * Helper calls to extract info from descriptors and other trivial
  * state from regs.
  */
 static inline int stream_desc_sof(struct SDesc *d)

hw/input/stellaris_input.c

@@ -69,7 +69,7 @@ static const VMStateDescription vmstate_stellaris_gamepad = {
     }
 };
 
-/* Returns an array 5 ouput slots.  */
+/* Returns an array of 5 output slots.  */
 void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode)
 {
     gamepad_state *s;

hw/intc/xics.c

@@ -739,7 +739,7 @@ int xics_alloc(XICSState *icp, int src, int irq_hint, bool lsi)
 }
 
 /*
- * Allocate block of consequtive IRQs, returns a number of the first.
+ * Allocate block of consecutive IRQs, and return the number of the first IRQ in the block.
  * If align==true, aligns the first IRQ number to num.
  */
 int xics_alloc_block(XICSState *icp, int src, int num, bool lsi, bool align)

hw/net/fsl_etsec/etsec.c

@@ -353,7 +353,7 @@ static ssize_t etsec_receive(NetClientState *nc,
     etsec->need_flush = false;
     ret = etsec_rx_ring_write(etsec, buf, size);
     if (ret == 0) {
-        /* The packet will be queued, let's flush it when buffer is avilable
+        /* The packet will be queued, let's flush it when buffer is available
          * again. */
         etsec->need_flush = true;
     }

hw/sd/pl181.c

@@ -46,7 +46,7 @@ typedef struct PL181State {
     int32_t fifo_pos;
     int32_t fifo_len;
     /* The linux 2.6.21 driver is buggy, and misbehaves if new data arrives
-       while it is reading the FIFO.  We hack around this be defering
+       while it is reading the FIFO.  We hack around this by deferring
        subsequent transfers until after the driver polls the status word.
        http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=4446/1
      */

hw/vfio/pci.c

@@ -3377,7 +3377,7 @@ static bool vfio_radeon_smc_is_running(VFIOPCIDevice *vdev)
     uint32_t clk, pc_c;
 
     /*
-     * Registers 200h and 204h are index and data registers for acessing
+     * Registers 200h and 204h are index and data registers for accessing
      * indirect configuration registers within the device.
      */
     vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);

hw/xen/xen-host-pci-device.c

@@ -40,7 +40,7 @@ static int xen_host_pci_sysfs_path(const XenHostPCIDevice *d,
                   d->domain, d->bus, d->dev, d->func, name);
 
     if (rc >= size || rc < 0) {
-        /* The ouput is truncated or an other error is encountered */
+        /* The output is truncated, or some other error was encountered */
         return -ENODEV;
     }
     return 0;

include/block/scsi.h

@@ -229,7 +229,7 @@ const char *scsi_command_name(uint8_t cmd);
 #define MODE_PAGE_TO_PROTECT                  0x1d
 #define MODE_PAGE_CAPABILITIES                0x2a
 #define MODE_PAGE_ALLS                        0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
  * of MODE_PAGE_SENSE_POWER */
 #define MODE_PAGE_CDROM                       0x0d
 

include/exec/memory.h

@@ -1146,7 +1146,7 @@ MemTxResult memory_region_dispatch_write(MemoryRegion *mr,
  * address_space_init: initializes an address space
  *
  * @as: an uninitialized #AddressSpace
- * @root: a #MemoryRegion that routes addesses for the address space
+ * @root: a #MemoryRegion that routes addresses for the address space
  * @name: an address space name.  The name is only used for debugging
  *        output.
  */

libcacard/card_7816t.h

@@ -57,7 +57,7 @@ struct VCardAPDUHeader {
     unsigned char ah_p1;
     unsigned char ah_p2;
     unsigned char ah_Le;
-    unsigned char ah_body[1]; /* indefinate length */
+    unsigned char ah_body[1]; /* indefinite length */
 };
 
 /*

libdecnumber/decContext.c

@@ -186,7 +186,7 @@ uInt decContextGetStatus(decContext *context) {
 /*  newstatus is the source for the bits to be restored		      */
 /*  mask indicates the bits to be restored (the status bit that	      */
 /*    corresponds to each 1 bit in the mask is set to the value of    */
-/*    the correspnding bit in newstatus)			      */
+/*    the corresponding bit in newstatus)			      */
 /*  returns context						      */
 /*								      */
 /* No error is possible.					      */

libdecnumber/decNumber.c

@@ -2238,7 +2238,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs,
       /* if a negative power the constant 1 is needed, and if not subset */
       /* invert the lhs now rather than inverting the result later */
       if (decNumberIsNegative(rhs)) {	/* was a **-n [hence digits>0] */
-	decNumber *inv=invbuff;		/* asssume use fixed buffer */
+	decNumber *inv=invbuff;		/* assume use fixed buffer */
 	decNumberCopy(&dnOne, dac);	/* dnOne=1;  [needed now or later] */
 	#if DECSUBSET
 	if (set->extended) {		/* need to calculate 1/lhs */
@@ -3849,7 +3849,7 @@ static void decToString(const decNumber *dn, char *string, Flag eng) {
 /*								      */
 /* Addition, especially x=x+1, is speed-critical.		      */
 /* The static buffer is larger than might be expected to allow for    */
-/* calls from higher-level funtions (notable exp).		      */
+/* calls from higher-level functions (notably exp).		      */
 /* ------------------------------------------------------------------ */
 static decNumber * decAddOp(decNumber *res, const decNumber *lhs,
 			    const decNumber *rhs, decContext *set,
@@ -4263,7 +4263,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs,
 /* long subtractions.  These are acc and var1 respectively.	      */
 /* var1 is a copy of the lhs coefficient, var2 is the rhs coefficient.*/
 /* The static buffers may be larger than might be expected to allow   */
-/* for calls from higher-level funtions (notable exp).		      */
+/* for calls from higher-level functions (notably exp).		      */
 /* ------------------------------------------------------------------ */
 static decNumber * decDivideOp(decNumber *res,
 			       const decNumber *lhs, const decNumber *rhs,
@@ -5254,7 +5254,7 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs,
 /*    exp(-x) where x can be the tiniest number (Ntiny).	      */
 /*								      */
 /* 2. Normalizing x to be <=0.1 (instead of <=1) reduces loop	      */
-/*    iterations by appoximately a third with additional (although    */
+/*    iterations by approximately a third with additional (although    */
 /*    diminishing) returns as the range is reduced to even smaller    */
 /*    fractions.  However, h (the power of 10 used to correct the     */
 /*    result at the end, see below) must be kept <=8 as otherwise     */