hw: explicitly include qemu/log.h

Move the inclusion out of hw/hw.h, most files do not need it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/arm/ast2400.c

@@ -17,6 +17,7 @@
 #include "exec/address-spaces.h"
 #include "hw/arm/ast2400.h"
 #include "hw/char/serial.h"
+#include "qemu/log.h"
 
 #define AST2400_UART_5_BASE      0x00184000
 #define AST2400_IOMEM_SIZE       0x00200000

hw/arm/nseries.c

@@ -37,6 +37,7 @@
 #include "hw/loader.h"
 #include "sysemu/block-backend.h"
 #include "hw/sysbus.h"
+#include "qemu/log.h"
 #include "exec/address-spaces.h"
 
 /* Nokia N8x0 support */

hw/arm/palmetto-bmc.c

@@ -17,6 +17,7 @@
 #include "hw/arm/arm.h"
 #include "hw/arm/ast2400.h"
 #include "hw/boards.h"
+#include "qemu/log.h"
 
 static struct arm_boot_info palmetto_bmc_binfo = {
     .loader_start = AST2400_SDRAM_BASE,

hw/arm/pxa2xx_gpio.c

@@ -12,6 +12,7 @@
 #include "hw/hw.h"
 #include "hw/sysbus.h"
 #include "hw/arm/pxa.h"
+#include "qemu/log.h"
 
 #define PXA2XX_GPIO_BANKS	4
 

hw/arm/stellaris.c

@@ -17,6 +17,7 @@
 #include "hw/i2c/i2c.h"
 #include "net/net.h"
 #include "hw/boards.h"
+#include "qemu/log.h"
 #include "exec/address-spaces.h"
 #include "sysemu/sysemu.h"
 

hw/arm/strongarm.c

@@ -38,6 +38,7 @@
 #include "sysemu/sysemu.h"
 #include "hw/ssi/ssi.h"
 #include "qemu/cutils.h"
+#include "qemu/log.h"
 
 //#define DEBUG
 

hw/arm/xlnx-ep108.c

@@ -23,6 +23,7 @@
 #include "hw/boards.h"
 #include "qemu/error-report.h"
 #include "exec/address-spaces.h"
+#include "qemu/log.h"
 
 typedef struct XlnxEP108 {
     XlnxZynqMPState soc;

hw/audio/pl041.c

@@ -22,6 +22,7 @@
 
 #include "qemu/osdep.h"
 #include "hw/sysbus.h"
+#include "qemu/log.h"
 
 #include "pl041.h"
 #include "lm4549.h"

hw/block/m25p80.c

@@ -27,6 +27,7 @@
 #include "sysemu/blockdev.h"
 #include "hw/ssi/ssi.h"
 #include "qemu/bitops.h"
+#include "qemu/log.h"
 
 #ifndef M25P80_ERR_DEBUG
 #define M25P80_ERR_DEBUG 0

hw/block/pflash_cfi01.c

@@ -45,6 +45,7 @@
 #include "qemu/bitops.h"
 #include "exec/address-spaces.h"
 #include "qemu/host-utils.h"
+#include "qemu/log.h"
 #include "hw/sysbus.h"
 #include "sysemu/sysemu.h"
 

hw/char/bcm2835_aux.c

@@ -22,6 +22,7 @@
 
 #include "qemu/osdep.h"
 #include "hw/char/bcm2835_aux.h"
+#include "qemu/log.h"
 
 #define AUX_IRQ         0x0
 #define AUX_ENABLES     0x4

hw/char/cadence_uart.c

@@ -17,6 +17,10 @@
  */
 
 #include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "sysemu/char.h"
+#include "qemu/timer.h"
+#include "qemu/log.h"
 #include "hw/char/cadence_uart.h"
 
 #ifdef CADENCE_UART_ERR_DEBUG

hw/char/digic-uart.c

@@ -30,6 +30,7 @@
 #include "hw/hw.h"
 #include "hw/sysbus.h"
 #include "sysemu/char.h"
+#include "qemu/log.h"
 
 #include "hw/char/digic-uart.h"
 

hw/char/imx_serial.c

@@ -22,6 +22,7 @@
 #include "hw/char/imx_serial.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/char.h"
+#include "qemu/log.h"
 
 #ifndef DEBUG_IMX_UART
 #define DEBUG_IMX_UART 0

hw/char/pl011.c

@@ -10,6 +10,7 @@
 #include "qemu/osdep.h"
 #include "hw/sysbus.h"
 #include "sysemu/char.h"
+#include "qemu/log.h"
 
 #define TYPE_PL011 "pl011"
 #define PL011(obj) OBJECT_CHECK(PL011State, (obj), TYPE_PL011)

hw/char/stm32f2xx_usart.c

@@ -24,6 +24,7 @@
 
 #include "qemu/osdep.h"
 #include "hw/char/stm32f2xx_usart.h"
+#include "qemu/log.h"
 
 #ifndef STM_USART_ERR_DEBUG
 #define STM_USART_ERR_DEBUG 0

hw/display/bcm2835_fb.c

@@ -29,6 +29,7 @@
 #include "hw/display/framebuffer.h"
 #include "ui/pixel_ops.h"
 #include "hw/misc/bcm2835_mbox_defs.h"
+#include "qemu/log.h"
 
 #define DEFAULT_VCRAM_SIZE 0x4000000
 #define BCM2835_FB_OFFSET  0x00100000

hw/display/cg3.c

@@ -31,6 +31,7 @@
 #include "ui/console.h"
 #include "hw/sysbus.h"
 #include "hw/loader.h"
+#include "qemu/log.h"
 
 /* Change to 1 to enable debugging */
 #define DEBUG_CG3 0

hw/display/pl110.c

@@ -12,6 +12,7 @@
 #include "ui/console.h"
 #include "framebuffer.h"
 #include "ui/pixel_ops.h"
+#include "qemu/log.h"
 
 #define PL110_CR_EN   0x001
 #define PL110_CR_BGR  0x100

hw/display/virtio-gpu.c

@@ -19,6 +19,7 @@
 #include "hw/virtio/virtio.h"
 #include "hw/virtio/virtio-gpu.h"
 #include "hw/virtio/virtio-bus.h"
+#include "qemu/log.h"
 
 static struct virtio_gpu_simple_resource*
 virtio_gpu_find_resource(VirtIOGPU *g, uint32_t resource_id);