#rnx
#rb none
#ROBOMERGE-SOURCE: CL 10869241 via CL 10869527 via CL 10869904
#ROBOMERGE-BOT: (v613-10869866)
[CL 10870586 by ryan durand in Main branch]
This is a direct copy from CL 7095088 with a partial revert of original CL 6759985 to address the merge conflict
- When changing selection in sequencer, the curve editor now selects the same nodes on its tree as well as isolating (auto-filtering) the tree to those nodes. This makes it much easier to drill down into curves from the sequence. Both these settings are configurable through the Editor Preferences ("Synchronize Curve Editor Selection" and "Isolate Curve Editor To Selection")
- Changed pin widgets to only be visible when their table row is hovered, or if the pin is active
- Changed filter logic to exclude implicit children when a sibling was explicitly matched. This prevents seemingly unmatched nodes showing up in hierarchies where nested matches occur.
- Expanded text filter logic to include Parent.Child.Gradchild syntaxfor matching specific hierarchies of nodes
#jira UE-76189
#rb Max.Chen, Matt.Hoffman
#ROBOMERGE-OWNER: lina.halper
#ROBOMERGE-AUTHOR: andrew.rodham
#ROBOMERGE-SOURCE: CL 7099711 in //UE4/Release-4.23/... via CL 7099743
#ROBOMERGE-BOT: ANIM (Main -> Dev-Anim) (v367-6836689)
[CL 7126481 by andrew rodham in Dev-Anim branch]
This is a direct copy from CL 7095088 with a partial revert of original CL 6759985 to address the merge conflict
- When changing selection in sequencer, the curve editor now selects the same nodes on its tree as well as isolating (auto-filtering) the tree to those nodes. This makes it much easier to drill down into curves from the sequence. Both these settings are configurable through the Editor Preferences ("Synchronize Curve Editor Selection" and "Isolate Curve Editor To Selection")
- Changed pin widgets to only be visible when their table row is hovered, or if the pin is active
- Changed filter logic to exclude implicit children when a sibling was explicitly matched. This prevents seemingly unmatched nodes showing up in hierarchies where nested matches occur.
- Expanded text filter logic to include Parent.Child.Gradchild syntaxfor matching specific hierarchies of nodes
#jira UE-76189
#rb Max.Chen, Matt.Hoffman
#ROBOMERGE-OWNER: Andrew.Rodham
#ROBOMERGE-AUTHOR: andrew.rodham
#ROBOMERGE-SOURCE: CL 7099711 in //UE4/Release-4.23/...
#ROBOMERGE-BOT: RELEASE (Release-4.23 -> Main) (v367-6836689)
[CL 7099743 by Andrew Rodham in Main branch]
The curve editor supports three view types by default - an absolute view (default, matches old behavior), a stacked view and a normalized view. Stacked views draw each curve separately (so non-overlapping) and normalized against their own min/max values. The normalized view draws all curves overlapping with each one normalized against its own min/max values.
A tree view has been added to help effectively manage large numbers of curves. Selecting curves in the treeview controls which curves are visible in the view area. The treeview also supports pinning curves. These pinned curves will always be visible regardless of your selection in the tree view.
A transform tool and a retiming tool have been implemented (via a plugin) which is enabled by default. The transform tool allows you to do a marquee selection of keys and then translate and scale the positions of these keys. The retiming tool allows you to create a 1 dimensional lattice to adjust the timing of your keys with a linear falloff between each lattice point. These tools work across multiple views at the same time which is especially useful if you are representing one dimensional data (such as event keys) in a view, as it allows you to adjust this data at the same time as your animation curves. A smoothing filter has been implemented (via a plugin) to allow running highpass and lowpass filters on your keys.
Opening the curve editor in Sequencer/UMG now creates a separate dockable tab which can be resized and docked as desired. A time slider has been added to the Curve Editor which is synchronized to the playback time in Sequencer. This allows you to scrub time in the curve editor without having to find the Sequencer window and adjust time there while looking at your keys and previewing your animation in the viewport at the same time.
Rudimentary support has been added for saving and later restoring a set of curves in your current session. This allows you to do a rudimentary copy/paste of entire curves but can also be useful for saving a curve, making adjustments to it and then deciding you want to go back - simply reapply the saved curve! Each curve added supports an intention name (such as "Location.X" or "FieldOfView"), and these intention names will be used when trying to apply curves. This allows you to reliably take all of the curves of a transform on one object and apply them to another object (and ensure that Location.X gets applied to the new Location.X, etc.) this can be helpful if you have a mixed set of curves buffered (such as a location and a field of view). In the event that no curves match by intention you can store and apply a single curve at a time from any intention to any other intention.
The Curve Asset editors (float, vector and color curve assets) have been changed to use the new editor. They support the same treeviews, filtering and tools that the Sequencer editor does. In addition, the Color Curve asset editor adds an additional view which provides a 1 dimensional gradient editor as an easier way to visualize and edit colors instead of the channels individually.
#rb Max.Chen, Andrew.Rodham
#ROBOMERGE-OWNER: lina.halper
#ROBOMERGE-AUTHOR: matt.hoffman
#ROBOMERGE-SOURCE: CL 6631811 via CL 6633746 via CL 6633863
#ROBOMERGE-BOT: ANIM (Main -> Dev-Anim) (v365-6733468)
[CL 6751117 by matt hoffman in Dev-Anim branch]
The curve editor supports three view types by default - an absolute view (default, matches old behavior), a stacked view and a normalized view. Stacked views draw each curve separately (so non-overlapping) and normalized against their own min/max values. The normalized view draws all curves overlapping with each one normalized against its own min/max values.
A tree view has been added to help effectively manage large numbers of curves. Selecting curves in the treeview controls which curves are visible in the view area. The treeview also supports pinning curves. These pinned curves will always be visible regardless of your selection in the tree view.
A transform tool and a retiming tool have been implemented (via a plugin) which is enabled by default. The transform tool allows you to do a marquee selection of keys and then translate and scale the positions of these keys. The retiming tool allows you to create a 1 dimensional lattice to adjust the timing of your keys with a linear falloff between each lattice point. These tools work across multiple views at the same time which is especially useful if you are representing one dimensional data (such as event keys) in a view, as it allows you to adjust this data at the same time as your animation curves. A smoothing filter has been implemented (via a plugin) to allow running highpass and lowpass filters on your keys.
Opening the curve editor in Sequencer/UMG now creates a separate dockable tab which can be resized and docked as desired. A time slider has been added to the Curve Editor which is synchronized to the playback time in Sequencer. This allows you to scrub time in the curve editor without having to find the Sequencer window and adjust time there while looking at your keys and previewing your animation in the viewport at the same time.
Rudimentary support has been added for saving and later restoring a set of curves in your current session. This allows you to do a rudimentary copy/paste of entire curves but can also be useful for saving a curve, making adjustments to it and then deciding you want to go back - simply reapply the saved curve! Each curve added supports an intention name (such as "Location.X" or "FieldOfView"), and these intention names will be used when trying to apply curves. This allows you to reliably take all of the curves of a transform on one object and apply them to another object (and ensure that Location.X gets applied to the new Location.X, etc.) this can be helpful if you have a mixed set of curves buffered (such as a location and a field of view). In the event that no curves match by intention you can store and apply a single curve at a time from any intention to any other intention.
The Curve Asset editors (float, vector and color curve assets) have been changed to use the new editor. They support the same treeviews, filtering and tools that the Sequencer editor does. In addition, the Color Curve asset editor adds an additional view which provides a 1 dimensional gradient editor as an easier way to visualize and edit colors instead of the channels individually.
#rb Max.Chen, Andrew.Rodham
#ROBOMERGE-SOURCE: CL 6631811 via CL 6633746
#ROBOMERGE-BOT: (vundefined-6620334)
[CL 6633863 by matt hoffman in Main branch]
#lockdown Nick.Penwarden
#rb none
============================
MAJOR FEATURES & CHANGES
============================
Change 3801826 by Max.Chen
PR #4304: Level Sequence crash fix - Guarded against dereferencing null componen. (Contributed by DSDambuster)
Change 3801828 by Max.Chen
PR #4302: Movie Scene Visibility Template unitialised variable, causing random . (Contributed by DSDambuster)
Change 3801837 by Max.Chen
Sequencer: Delay spawning/construction for convert to possessable. This fixes a bug where property values would be lost when
converting back and forth from possessable to spawnable.
#jira UE-52400
Change 3801841 by Max.Chen
Sequencer: Make spacer nodes not selectable.
PR #4194: Improvements to Sequencer (Contributed by projectgheist)
#jira UE-53117
#jira UE-52139
Change 3804183 by Max.Preussner
MediaAssets: Added missing lock in media sound component
Change 3805414 by Max.Preussner
MediaAssets: Setting valid GUID when initializing media texture resource
Change 3819578 by Max.Chen
PR #4370: When enabling the "MovieCapture", do not turn off the Stereo-3D display. (Contributed by yehaike)
#jira UE-53647
Change 3823414 by Max.Chen
Curve Editor: Lock down the first and last keys in the redundant keys removal range so that they're unaffected.
#jira UE-53591
Change 3826406 by Max.Chen
Sequencer: Move OnStartedPlaying() to within first update in UpdateTimeCursorPosition(). This fixes an issue where setting the
hud/player visibility was getting stomped on later.
#jira UE-52772
Change 3827044 by Max.Preussner
MediaAssets: Added sprite visualization to media sound component
#jira UE-53594
Change 3827988 by Max.Preussner
MediaPlayerAssets: Fixed Media Texture is not linked to Media Player when created together
#jira UE-53532
Change 3828506 by Max.Preussner
MediaPlayerEditor: Added attenuation visualizer for media sound components
#jira UE-53594
Change 3832590 by andrew.porter
EngineTest: Added a keep state check in Property Animation sequencer test
Change 3833053 by andrew.porter
EngineTest: Adding Hierarchical Bias test
Change 3835683 by andrew.porter
EngineTest: Adding UMG Animation screenshot test
Change 3836076 by Max.Chen
Sequencer: Fix audio volume and pitch multiplier deprecation.
Change 3836230 by andrew.porter
EngineTest: Adding Sequence Bone Position automation test
Change 3836347 by Max.Chen
Sequencer: Fixes to shot name parsing.
When a shot doesn't contain a shot number, assume, [ShotName]_[TakeNumber].
When duplicating a shot, put the new shot in the same path of the original shot, so that the take numbers will increment
properly.
#jira UE-51868
Change 3836552 by Max.Chen
Sequencer: Sub section now has a takes menu
Change 3838094 by Max.Chen
UMG: Fix template finish not getting called on stop. This fixes a bug where sections aren't restored when finished.
#jira UE-52285
Change 3838708 by Max.Chen
Sequencer: Add notification when the blend type is changed.
#jira UE-54046
Change 3840295 by Max.Chen
Sequencer: Fix copy/paste crash for lights
#jira UE-54084
Change 3840957 by Mike.Zyracki
Added Show Only Keyable and Show Only Animated to the filter list in the property editor.
Added IsPropertyAnimated to IDetailKeyframe Interface which already had support for showing properties which are keyable (which
is used for the key icon next to the properties.). Could have created another interface but then would have had to mimic the sequencer
binding, releasing also, so this seemed best way.
One issue still left is that custom built detail items currently don't store associated properties(usually) and so certain
properties, in particulalry transforms, won't show up as keyable or animated. Note this also shows up with the keyable icon not showing
up next to transform tracks, and other filters like Show Only Modified not working with transforms/customs. Not sure best way to tackle
this.
#jira UESEQ-328
Change 3841756 by Max.Chen
Sequencer: Fix unbound possessable components when pasting spawnables.
#jira UE-54104
Change 3843950 by andrew.porter
EngineTest: Renaming LevelStreaming tests/content to LevelVisibility
Change 3844082 by Mike.Zyracki
Missing file for animated filter in property editor.
When finding if a track is animated we need to find it but we can't easily induce the MovieTrack class for any particular
property. So we don't set a class for it and just search by it's ID and name.
#jira UESEQ-328
Change 3846902 by Max.Preussner
ImgMedia: Fixed image media player never finished initialization if loading failed
#jira UE-54247
Change 3849820 by Mike.Zyracki
Reassigning deleted widgets didn't work since the menu extender mechanism needs a valid UObject in order to perform an operation
on it. So to fix we replaced GetObjectBindingContextMenuExtender in WidgetBlueprint with new delegate mechanism
(OnBuildCustomContextMenuForGuid) that supports FGuid in addition to UObjects which is needed to handle re-binding deleted widgets. Note
that the default sequencer hacks this for replacing deleted actors in SequencerObjectBindingNode to check to see if a LevelSequence is
active. We could move to this mechanism there also.
#jira UE-53163
Change 3852211 by Max.Chen
UMG: Indicate name of the property that is not bound.
#jira UE-54350
Change 3854120 by Max.Chen
Sequencer: Fix sibling folders being allowed to have the same folder name.
#jira UE-54363
Change 3854627 by Max.Chen
Sequencer: Step to next/previous key should work for all tracks if there aren't any selected.
#jira UESEQ-391
Change 3855825 by andrew.porter
EngineTest: Adding animation blending automation test
Change 3855950 by andrew.porter
EngineTest: Adding correct expected valuues to animation blending test
Change 3856237 by Matt.Hoffman
UESEQ-336 - Sequencer Track Reordering
Adds the ability to re-order Master Tracks, Folders and Object Bindings within sequencer hierarchies (including UMG). Adds the
ability to do a one-off sorting of the content under the old sorting behavior if the user wants to reset their layout to how it was
under legacy behavior.
Modifies SequencerTrackNodes, SequencerFolderNodes and SequencerObjectBindingNodes to handle CanDrop/OnDrop for above, below and
ontop of.
Fixes a Slate Issue that forcibly expanded a TreeviewRow if an item handled OnDrop. Slate will now only forcibly expand the row
if the item says the drop happened ontop of the item, and not above or below it like it previously did.
Change 3856503 by andrew.porter
EngineTest: Adding automation test for using animation blueprint with blend multi node in sequencer
Change 3857875 by Max.Chen
Sequencer: Assign the sequence id after the template is compiled.
#jira UE-54462
Change 3858344 by Max.Chen
Sequencer: Prevent Goto and Transform boxes from overlapping by allowing them to be visible at the same time in an autosized
horizontal box. Also, added close button to the goto box.
PR #4425: Prevent Goto and Transform boxes from overlapping in Sequencer ... (Contributed by projectgheist)
#jira UE-54210
Change 3860566 by andrew.porter
MediaFrameworkTest: Set the option to index 0 for the audio and video track list by default
Change 3860654 by andrew.porter
EngineTest: Enabling Camera Cut + FOV test
Change 3860981 by andrew.porter
EngineTest: Updating skeletal mesh tests with a delay after set playback position
Change 3861256 by Max.Chen
Sequencer: Add all bindings if none selected.
#jira-54440
Change 3862154 by Andrew.Rodham
Added TimeManagement module
Change 3862424 by andrew.porter
EngineTest: Turned on the test Bone Positions with Blend Multi Node
Change 3862573 by andrew.porter
EngineTest: Adding test to compare bone positions in a sequence that is blending an animation that is using an AnimBP
Change 3865117 by Max.Chen
Sequencer: Stop auto scroll on mouse release of movement.
#jira UE-31212
Change 3865303 by Max.Chen
Sequencer: Add drag and drop transactions
#jira UE-54662
Change 3865304 by Max.Chen
Sequencer: Fix crash when an actor factory is not found.
Change 3865361 by Max.Chen
Sequencer: Don't change the camera/shot lock button when popping out of a sequence.
#jira UE-54665
Change 3865412 by Max.Chen
Sequencer: Determine whether a transform track is for a camera by using the spawned object or template
#jira UE-54666
Change 3865685 by Max.Chen
Sequencer: Clear autoscrub offset when stopping autoscroll
#jira UE-31212
Change 3865886 by Max.Chen
Sequence Recorder: Log an error if the number of frames changes while recording. This can happen if the skeleton changes while
recording.
#jira UE-48715
Change 3866925 by Andrew.Porter
MediaFrameworkTest: Changing the current PNG test video image sequence to 1024 x 576
Change 3867705 by andrew.porter
QAGame: Adding Audio Sort Sequence to dev folder
Change 3867890 by andrew.porter
QAGame: Adding a sequence for testing a sorting crash to my dev folder
Change 3872628 by Max.Chen
Movie Scene Capture: Split delay before warmup into split delay before shot warmup so that there's separate controls for when
the movie scene capture warmups up vs. shot boundaries.
Change 3873131 by Matt.Hoffman
UE-54732 - Crash reordering a folder with a track.
This was caused by folders being the only type of track to check if someone was putting a parent track into a child track.
Object Binding tracks and Tracks now check as well so that you can't use the above/below drop targets to add parents as children.
This also fixed a typo in the localization keys.
#jira UE-54732
Change 3873301 by Mike.Zyracki
Added ability to support continous euler angle changes when changing rotations, in particularly with the rotation gizmo's. To do
this we effectively added a form an of 'euler filter'(https://en.wikipedia.org/wiki/Euler_filter) to find the closest euler angle to the
current euler angle.
Three functions were added to FRotator to make this possible, one to get the euler angle that's has the same rotation as it, one
to get the difference between two euler angles via Manhattan distance and a third using the previous two to choose a Rotator value
that's closest to it. We then use these functions before calling UComponent::SetRelativeRotation to make sure we use the correct Euler
after the Quat conversion. We also no longer limit(bound) the euler angles to -180,180, which is obviously necessary to avoid flips.
I also changed how we caluclate yaw and roll when pitch is -90 or 90 to make it the standard approach of zeroing out roll and
just setting yaw. Main reasons are the previous implementation had precision issues so things like 180, 90, -180 would show up due to
numbers being nearly zero but negative,(this would break any smooth interpolations), and this facilitates having a 'gimbal' rotation
mode (like Maya, Blender etc..) if we ever want that also. If needed we could keep the previous implementation but would need to add
some FMath::IsNearlyZero checks, with less performance.
Note we only do this special filtering when applying delta's to actors or components in the editors, which then call
UComponent::SetRelativeRotationExact, which is a new function to foces the RelativeRotation to be equal to the new rotation. This allows
us to store un-nomalized Rotators at the cost that the RotationCache may be broken. We didn't change any of the other UComponent
functions that set rotations (via Quats or Transforms) so they will still be bounded and unwound.
In SetInternalWorldLocationAndRotation we only set the rotation if the rotation has changed, which fixes the rotation getting
changed and re-normalized if just translate happens.
In TransformTrackEditor, we correclty use the bUndwing flag and in MovieScene3DTransformSection there was an un-needed winding
check there, it will be unwound earlier if needed, which happens if Sequence Recording is happening. Max we should talk about what to do
about this .
Note the euler angle drag via the widget is still bound to 0-360. I think we should just unbound that now since the rotations
value are now unbound.
This review now includes fixes suggested by Zak.
#jira UE-UE-22228
Change 3873483 by Matt.Hoffman
Sequencer Tracks can now be inserted above the spacer at the bottom of the tree.
#jira UE-54706
Change 3873899 by Max.Chen
Sequencer: Add section selection throbbing
Change 3873908 by Max.Chen
Movie Scene Capture: Added logging per frame
Change 3873924 by Matt.Hoffman
Adds the ability to store Sequence Recorder setups into profiles that stay with the map and can be re-loaded later. Profiles
store the Actor Recordings so the settings for each actor should carry with them.
#jira UESEQ-339
Change 3874726 by Matt.Hoffman
Disable drag-and-drop targets on spacers that come between rows in Sequencer. This prevents extra drag/drop targets showing up
between each row.
#jira UE-54706
Change 3874862 by Matt.Hoffman
Audio Track no longer gets reordered when adding sub-audio tracks, as sub-tracks are no longer counted towards the sorting order
index when normalizing indexes.
#jira UE-54727
Change 3875905 by Matt.Hoffman
Disable Fade Track UI if a fade track already exists in the sequence.
#jira UESEQ-393
Change 3876163 by Max.Chen
Sequencer: Swap the camera object to the camera component's owner if it's not the same.
#jira UE-54874
Change 3876971 by Andrew.Porter
EngineTest: Moved Media Player Seek test to new folder. Also enabled the test with new ground truth image.
Change 3877040 by Max.Chen
Cine Camera: Split camera properties to two groups, "Camera Options" and "Camera Settings". The cine camera now hides properties
in the "Camera Settings" group so that properties like bConstrainAspectRatio (in the "Camera Options" group) can be visible.
#jira UE-54192
Change 3877763 by Max.Chen
Curve Editor: Fix curve changed on end drag so that only curves that had keys/tangents that were changed receive notification,
otherwise all loaded curves were getting notified that they were changed.
#jira UE-54951
Change 3878234 by Matt.Hoffman
Disable "Drop Below" targets for Sequencer Tree nodes to prevent a confusing UX issue where dropping underneath a Object Binding
Node puts it after the object binding node but the UI looks like it's inserting it inside the Object Binding node.
#jira UE-54743
Change 3879359 by Mike.Zyracki
If a track is inactive we dim it a bit which seems to be the UE4 way to show inactive or disabled state. We changed the active
logic so that all subtracks need to be inactive for the track to also be inactive(instead of all active for active). This conforms to
how the active state actually works, e.g if you have two sections and only one is active the track is still active above it.
#jira UESEQ-388
Change 3879462 by Max.Chen
Sequencer: Allow dragging onto a particular row which would move out any overlapping sections to make space for the newly
created section. Newly created sections are now selected and throbbed to draw attention to themselves.
#jira UE-54664
Change 3879464 by Max.Chen
Sequencer: Fixed overlapping ranges being inserted into the evaluation field during compilation
- The issue was that track segments that had been combined with adjacent segments (due to them being identical) would
potentially cause a subsequently compiled frame to overlap with a range that had already been inserted into the evaluation field.
- The insertion code previously asserted that only minor overlaps were catered for (due to fp rounding errors) and assumed
that a supplied range could not entirely contain any other range in the field.
- The solution is to supply the insertion time along with the range to know exactly where the data should live in the field,
and crop the range to the maximum allowable space between adjacent ranges.
#jira UE-54922
Change 3879590 by Matt.Hoffman
Items that are now added to the Sequencer via the "+Track" menu will be selected after being added.
Items can now be added inside of folders instead of just to the root level.
#jira UE-27397
Change 3879612 by Mike.Zyracki
Display Nodes with no children are always active.
#jira UESEQ-388
Change 3879730 by Matt.Hoffman
Sequence Recorder's actor recording groups now remove items from the group when removed via the UI.
#jira UESEQ-339
Change 3880256 by Mike.Zyracki
Fix issue with inactive display with folders and other track nodes.
#jira UESEQ-388
Change 3883491 by Max.Chen
Fix issue where tick is skipped due to last ticked pose isn't cleared after AnimInstance changes.
Copy from Release-4.19
#jira UE-51323
Change 3883603 by Max.Chen
Movie Scene Capture: Add option toggle disable screen percentage. By default this is on (no change in current behavior).
#jira UE-51898
Change 3885074 by Max.Preussner
MediaCompositing: Resetting media texture & freeing resource on section end; removed dead code
Change 3887220 by Max.Preussner
MediaCompositing: Defaulted media section duration to 1 sec (since we do not know the actual duration in most cases)
Change 3887478 by Matt.Hoffman
Sequences now show [Inactive] in their title bars when they're disabled. This helps communicate why a sequence isn't being
evaluated.
#jira UE-51469
Change 3888985 by Max.Chen
Movie Scene Capture: Clamp HDR Compression Quality between 0 and 1.
#jira UE-55136
Change 3893519 by Max.Chen
Sequence Recorder: Clarified tooltip for bRecordNearbySpawnedActors - spawned actors will still be recorded if they match the
ActorFilter.
#jira UE-55238
Change 3893546 by Max.Chen
Sequence Recorder: If a selected actor already has a recording, add a blank recording.
#jira UE-55239
Change 3894044 by Max.Preussner
MediaCompositing: Added support for seeking into a media section
Change 3894310 by andrew.porter
MediaFrameworkTest: Adding Img media sources for 1080 and 2160 ravent test content
Change 3894426 by Max.Preussner
MediaAssets: Letting media textures with AutoClear retain their clear color when player is reset
Change 3895717 by Max.Chen
Sequencer: Null checks to prevent crash when saving the default state of a spawnable
#jira UE-55304
Change 3897388 by Max.Chen
Sequencer: Don't update current time to be within the view range when stepping into a sequence.
#jira UE-55322
Change 3897452 by Max.Chen
Audio: Fix crash when trying to record audio without any active capture devices. Log warning if the number of input channels is
not 1 or 2.
#jira UE-55223
Change 3897619 by Max.Preussner
MediaCompositing: Removed commented out code
Change 3898072 by Max.Chen
Sequencer: Override the animation asset in the player state if it doesn't match the animation asset that's being evaluated.
#jira UE-55328
Change 3898272 by Max.Preussner
MediaPlayerEditor: Made slate brush constants static
Change 3898704 by Max.Chen
Sequencer: Skip if the binding id's sequence can't be found.
#jira UE-55337
Change 3899855 by Max.Preussner
MediaCompositingEditor: Added cache state visualization to media track
Change 3900300 by Max.Preussner
MediaCompositingEditor: Added loop indicators to media sections
Change 3900694 by Max.Preussner
ImfMedia: Looping cache only when player is looping
Change 3900892 by Max.Preussner
Stats: Added stats category for media framework
Change 3900954 by Max.Preussner
MediaCompositing: Don't evaluate at the end of media section
Change 3901348 by Max.Preussner
Core: Replaced TLruCache autos for better readability
Change 3901655 by Max.Preussner
ImgMedia: Added more perf stats to EXR reader
Change 3901972 by Max.Preussner
MediaAssets: Added getter for media player in media sound components
Change 3902233 by Max.Preussner
MediaAssets: Enabling media textures to receive samples right after player is assigned
Change 3902238 by Max.Preussner
MediaCompositing: Working around init/shutdown idiosyncracies in sequencer
Change 3904045 by Max.Chen
Sequencer: Fix copy/paste crash. Only process UMovieSceneCopyableBinding and objects that can be spawned by the movie scene
spawn register.
#jira UE-55314
Change 3905605 by Max.Chen
Sequencer: Restrict spawnables from being created if they have a ClassWithin that UMovieScene is not a child of.
#jira UE-55429
Change 3906550 by Max.Chen
Sequencer: Add media track icon
#jira UE-55480
Change 3907101 by Max.Chen
Sequence Recorder: Fix bugs related to not recording a level sequence. There were certain assumptions that creating a level
sequence meant that sequence recording was in progress. This is not always the case - the recorders can record animation assets and not
create a level sequence.
Changed the notion of IsRecording() to having at least one actor recording that is recording. Countdown timer, recording
displays, etc should function if IsRecording() and not based on whether a level sequence is created.
#jira UE-55485
Change 3907247 by Max.Chen
Sequence Recorder: Fix crash not removing PrepareToCleanseEditorObject delegate. Repros when opening sequence recorder, closing
it, and then opening or creating a level.
Change 3910343 by Max.Preussner
Core: Added async helper for executing functions on a given thread pool
Change 3910346 by Max.Preussner
ImgMedia: Added separate thread pools for loading/decoding and deleting image frames
Change 3910829 by Max.Preussner
Profiler: Increased visible range of profiler graph
Change 3910841 by Max.Preussner
MediaCompositing: Displaying asset name instead of full media source path in media section
Change 3910870 by Max.Preussner
ImgMedia: Using deallocation thread pool only in debug builds
Change 3919642 by Max.Chen
Sequence Recorder: Clarify active tooltip
#jira UE-55661
Change 3919660 by Max.Chen
Sequencer: Sequence template source signatures are now also compared to catch the case where a sub-sequence asset has been saved
but not modified
- The following sequence of events exposes this issue:
- Create a master sequence with a single shot that spawns a cube
- Add this sequence to a level and set it to auto-play
- Save everything and restart
- Resave just the inner shot asset without opening it
- PIE
- The inner shot never spawns its cube because its template was wiped on save, but its signature never changed. Since the
master sequence previously didn't check the template source signature, it ends up trying to evaluate an empty template.
#jira UE-55626
#jira UE-55490
Change 3921825 by Max.Chen
Sequencer: "Run Construction Script in Sequencer" is off by default for blueprints but on for Sequencer. This allows the content
author to switch it on for specific blueprints and sequencer will be default, run those with construction scripts enabled.
Change 3922232 by Max.Chen
Sequence Recorder: Reset countdelay on stop.
#jira UE-55755
Change 3922306 by Max.Chen
Sequence Recorder: Don't automatically mark transforms to be recorded by sequence recorder. Instead, log a warning if the user
toggled it off to warn that the resulting animation might not match gameplay.
#jira UE-55758
Change 3922912 by Max.Chen
Sequence Recorder: Fix refresh next sequence name
#jira UE-55757
Change 3927654 by Max.Chen
Movie Scene Capture: Added format mapping for the name of the current camera
#jira UE-55769
PR #4537
Change 3927658 by Max.Chen
Sequencer: Added fbx property mapping for "FocusDistance" to "FocusSettings.ManualFocusDistance"
#jira UE-55782
Change 3932022 by Max.Chen
Sequencer: Add import animation track section to next available row index.
#jira UE-55892
Change 3933919 by Max.Chen
Sequencer: Jump to playback start frame and not 0 to start playback for recording.
#jira UE-55933
Change 3934307 by Andrew.Rodham
Sequencer: Add template signature that is re-generated every time the base template is regenerated, which invalidates evaluation
fields
This fixes an issue where the same sequence is instantiated multiple times in a sequence.
If the source sequence was saved, its template would be wiped, which would invalidate the template ID
When an instance tries to evaluate the master template, it would only invalidate a range in the evaluation field that was the
hull of any invalid sub sequences overlapping the current time, potentially leaving invalid data in the evaluation field at positions
later (or earlier) on in the sequence
When the sub template was re-generated, it receives the same SequenceSignature as it had before (because the sequence hasn't
actually changed), which causes the stale evaluation field data to fail the IsDirty check (because the sequence is the same as it
thought, but the *template* has changed)
This has been addressed be adding a signature to templates themselves, and checking both the template signature and sequence
signature as a part of the IsDirty check. This ensures that we regenerate if either the template, or the sequence have changed.
#jira UE-55934
Change 3936327 by Andrew.Rodham
Sequencer: Removed increment when trimming right
UMovieSceneSection::TrimSection already explicity assigns an exclusive bound to the time passed in. The new behavior means we
can trim a section to the right, and insert another section without changing the time to create adjacent sections.
#jira UE-42652
Change 3936328 by Andrew.Rodham
Fixed KeyFrameManipulator assignment operators and copy/move constructors
- These types are potentially self-referential so cannot use default constructors/assignment
Change 3936330 by Andrew.Rodham
Converted UMGSequencePlayer to use frames internally
#jira UE-54878
Change 3936726 by Max.Chen
Sequencer: Set track node as the parent of the key area node. The key area switcher needs the object binding id from the parent
object binding node. Without this, the binding to the external value fails.
#jira UE-55931
Change 3936775 by Max.Chen
Sequencer: Should stop or loop should compare DurationFrames with Current Time from StartTime.
The bug is that if you set 30 warmup frames in movie rendering for a range of 0-100, the FrameRange will be starting at -30 and
have a duration of 130. Without this fix, the playback will continue until frame 130, rather than 100.
#jira UE-55933
Change 3936935 by Matt.Hoffman
Easing Curves are now represented in Play Rate resolution instead of internal resolution.
#jira UE-55937
Change 3937069 by Matt.Hoffman
Users can toggle if the is infinite on each side, limited by which tracks support infinite ranges.
#jira UE-55891
Change 3937516 by Max.Preussner
ImgMedia: Added support for single-threaded platforms
#jira UE-55986
Change 3937826 by Max.Preussner
MediaAssets: Disabling media sound components on HTML5 if AudioMixer is not enabled
Change 3937997 by Max.Chen
Curve Editor: Add Zoom to Fit Curves so that selected curves from Sequencer can be focused on. Tested that undo doesn't re-zoom.
#jira UE-55935
Change 3938000 by Max.Chen
Sequencer: Stop all sounds before generating audio waveforms.
#jira UE-55951
Change 3938376 by Max.Preussner
XGEController: Disabled XGE Controller in single-threaded apps to prevent crash
Change 3938444 by Max.Preussner
Core: Added async support for single-threaded applications
Change 3938445 by Max.Preussner
Networking: Added support for single-threaded applications in UDP socket sender/receiver
Change 3938447 by Max.Preussner
Messaging: Added support for single-threaded applications
Change 3939432 by Max.Chen
Sequence Recorder: Append command list to global level editor actions so that shortcuts are accessible in level editor.
#jira UE-55798
Change 3940229 by Andrew.Rodham
Added prospective display rate upgrade to UMovieScene::PostLoad
- There was previously some very odd behaviour that would assign the fixed frame interval only when a sub sequence was focused
in SSequencer. This meant that many sequences could have a frame interval of 0 set in the data.
- Under the old method of snap interval display this would have fallen back to getting the display interval from the sequencer
settings, but we no longer look at these.
- The USequencerSettings properties have been removed and in their place, a prospective data upgrade for sequences that have a
fixed frame interval old 0fps that sets the play rate to the previous defaults based off the old USequencerSettings defaults.
- This could end up 'changing' the display rate for sequences where the user has changed the snap interval in the settings for
a particular sequence editor, but there's not much we can do about that given we don't have access to the USequencerSettings classes in
UMovieScene
#jira UE-55919
Change 3940277 by Andrew.Rodham
Sequencer: Added ability to default frame resolutions and play rates for newly created actor sequences
Change 3940378 by Andrew.Rodham
Sequencer: Post move import dialog now defaults to the playback framerate of the sequence, and floors to frame numbers
Change 3940559 by Andrew.Rodham
Reinstated primed or recording sequence color
Change 3940642 by Max.Preussner
ImagePlate: Removed image plate media playback functionality
Change 3940843 by Max.Preussner
Core: Made TCircularQueue actually thread-safe; improved code comments
Change 3940860 by Max.Chen
Sequencer: Changed StructNameToKey to StructPathToKey
Previously, keying a PropertyPath of [RenderTransform][Shear][X] would get trimmed to X, which doesn't map to a channel name as
considered by Sequencer2dTransformTrackEditor. Instead, trim the resulting property path to [Shear][X] so that track editors can
determine the desired struct path and channels to key.
#jira UE-52966
Change 3941292 by Mike.Zyracki
Fix for trajectories out of range not showing up.
1) If we had no key data we would pop the time, so wouldn't get the section ranges.
2) Calculating of upper bound was wrong, checking against -1 and not key == num of keys when doing algo::lower_bound.
3) No need to do the Bck-- for the bakward iterators since we fixed#2. We start now from the upper bound correctly.
4) If we had no keys (at section start,end) we would incorrectly say we were any key type, so since we draw constant keys as
dashed we would do so incorrectly around section end points.
#jira UE-55929
Change 3941424 by Max.Chen
Curve Editor: Change Zoom to Fit to use TArrayView
Change 3941498 by Max.Preussner
Core: Added FMath::DivideAndRoundNearest function
Change 3942097 by Matt.Hoffman
Drop Frame Timecode Support for NTSC rates.
Change 3942104 by Matt.Hoffman
Sequence Recorder Group is no longer visible inside the World Outliner after using one.
#jira 55266
Change 3942107 by Max.Chen
Sequencer: Resurrect logic to find or extend an existing section when adding keys.
Change 3942330 by Max.Chen
Sequence Recorder: Better tooltip for default animation settings.
#jira UE-55636
Change 3942339 by Max.Chen
Sequence Recorder: Better tooltip for default animation settings.
#jira UE-55636
Change 3942507 by Andrew.Rodham
Sequencer: We no longer pad the time overlap threshold with a small number that is not scaled by the current zoom level
- The presence of this pad was causing keys that were far apart to be grouped when zoomed in a long way
Change 3942509 by Andrew.Rodham
Sequencer: Only pad total view range, rather than section range as well when retrieving keys to render
- This stops us from rendering keys that are within the view range, but outside the section range
Change 3942512 by Andrew.Rodham
Added transactions to some sequencer details customizations
Change 3942513 by Andrew.Rodham
Sequencer: Reinstated validation checks to UMovieSceneSection::SetStartFrame and SetEndFrame, changed erroneous uses to use
SetRange
Change 3942560 by Andrew.Rodham
Pass by rvalue reference to appease error C2719 on Win32
('InChannels': formal parameter with requested alignment of 8 won't be aligned)
Change 3942697 by Andrew.Rodham
Newly Created Level Sequences and Actor Sequences now default to 24000 fps frame resolution (+/- ~24hrs range, supporting all
integer rates + 23.976)
Change 3942700 by Andrew.Rodham
Sequencer: Added legacy out-of-bounds errors for times that are not supported by the current legacy upgrade frame resolution
Change 3942989 by Max.Preussner
Core: Fixed circular queue count calculation
Change 3943538 by Max.Preussner
MediaAssets: Reverted workaround for procedural audio log spam in HTML5
(Actor component initialization cannot be skipped if the component is used in a level)
Change 3944071 by Max.Preussner
QAGame: Fixed Media Texture keeps last frame of Media when PIE ends
#jira UE-53360
Change 3944292 by Max.Chen
Sequencer: Added extra flags to ensure that asset initialization does not occur on template actor sequences
#jira UE-56113
Change 3944364 by Max.Chen
Sequencer: Prevent circular shot/master tracks.
Tested adding master -> child -> master as drag and drop cinematic shot tracks and sub tracks as well as through the + button.
#jira UE-56091
Change 3944422 by Max.Chen
Sequence Recorder: Disable transform recording if off.
#jira UE-56061
Change 3944745 by Andrew.Rodham
Sequencer: Key rendering fixes
- Fixed assert that occured when keys happened to reside on some times due to KeyTime + TimeOverlapThreshold - KeyTime being
slightly larger TimeOverlapThreshold
- Fixed keys sometimes being clipped when zoomed right in due to lack of half-frame offset
- Added missing documentation to MovieSceneTimeHelpers.h
#jira UE-56107
Change 3945231 by Andrew.Rodham
Sequencer: Reconstruct channel proxy on Serialize to catch all cases of undo/redo, PostLoad and duplication
#jira UE-56089
Change 3945301 by Andrew.Rodham
Sequencer: Added safety checks during initial sequence recording to guard against applying negative or 0-sized sequence ranges
#jira UE-56125
Change 3946627 by Max.Preussner
Fortnite: Fixed game crashes closing editor while in PIE - Pure virtual function being called
#jira UE-56144
[CL 3946896 by Max Chen in Main branch]
#lockdown Nick.Penwarden
#rb none
==========================
MAJOR FEATURES + CHANGES
==========================
Change 3233612 on 2016/12/13 by Ben.Marsh
UGS: Fix cases where precompiled binaries are submitted for a content change.
Change 3235584 on 2016/12/14 by Ben.Marsh
UBT: Deprecate the overridable TargetRules.ShouldUseSharedBuildEnvironment() function; targets should specify which build environment to use by setting the BuildEnvironment field in their constructor instead.
Change 3235741 on 2016/12/14 by Ben.Marsh
UBT: Deprecate the SetupBinaries() callback on the TargetRules class. Instead of overriding this, targets may override their launch module through the "LaunchModuleName" property in their constructor, and add extra modules to the "ExtraModuleNames" field on the TargetRules object itself.
Change 3238176 on 2016/12/16 by Ben.Marsh
UBT: New XML config file parser. Now reads once at startup and can be applied to instanced objects rather than global fields, and caches parsed output in a binary form for quicker initialization on subsequent runs.
Change 3238249 on 2016/12/16 by Ben.Marsh
UBT: Add attribute-driven command line parser.
Change 3238462 on 2016/12/16 by Ben.Marsh
UBT: Include the Platform, Configuration and Architecture on the TargetRules. Add a constructor which takes the TargetInfo object and deprecate the parameterless one; these fields are currently initialized before invoking the constructor in RulesAssembly.
Change 3238564 on 2016/12/16 by Ben.Marsh
UBT: Deprecate the ModuleRules constructor which takes a TargetInfo argument. Replace it with a read-only wrapper around the target rules instead, so target-specific configuration options can be read without needing to access global static variables. Also require that it's passed to the base class constructor.
Change 3239919 on 2016/12/19 by Ben.Marsh
UBT: Remove the "PreferredSubPlatform" property. This is only used for Windows XP support, which is being retired anyway. Having the target define its own architecture is an awkward contractiction to maintain support for, since the target rules are constructed after the architecture already has been determined.
Change 3240061 on 2016/12/19 by Ben.Marsh
UBT: Remove ThirdPartyHeaderFinder. I don't think anything is using this any more.
Change 3240175 on 2016/12/19 by Ben.Marsh
UBT: Add the target name and project file location to the target rules.
Change 3240490 on 2016/12/19 by Ben.Marsh
UAT: Remove Mac staging code that requires UAT to compile and construct .target.cs files when packaging, to check bUseSteam and bUseCEF3 flags. libsteam_api.dylib is now staged at build time by adding it as a bundle resource, CEF3 is already marked as a runtime dependency by CEF3.build.cs, and UnrealCEFSubProcess.app is already marked as a runtime dependency from WebBrowser.build.cs.
Change 3240717 on 2016/12/20 by Ben.Marsh
UAT: Allow configuring UAT to run as if on a build machine by passing the -buildmachine argument on the command line.
Change 3240718 on 2016/12/20 by Ben.Marsh
UAT: Remove target-specific properties that are no longer used by staging (bUsesSlate, bUsesCEF3, etc...). This stuff should all be handled inside UBT.
Change 3241002 on 2016/12/20 by Ben.Marsh
UBT: Move most target configuration settings from UEBuildConfiguration to TargetRules. This encapsulates target specific settings that will allow instancing multiple targets in the future. To facilitate migration of settings to their new location, "UEBuildConfiguration" is now a property that returns the current target rules instance.
Change 3241027 on 2016/12/20 by Ben.Marsh
Only copy the Steamworks dylib into the app bundle for monolithic builds. For all other times, just add it as a runtime dependency.
Change 3241055 on 2016/12/20 by Ben.Marsh
UBT: Only store a ReadOnlyTargetRules object on the instanced build target; finalize the configuration before it's instantiated.
Change 3241156 on 2016/12/20 by Ben.Marsh
Update SwarmInterface.csproj to .NET framework 4.5, to match what all other C# tools are using.
Change 3241205 on 2016/12/20 by Ben.Marsh
Replace all uses of TargetRules.TargetType with TargetType.
Change 3241881 on 2016/12/21 by Ben.Marsh
UBT: Remove project file information from UEBuildContext base class. As configurable properties are moved on to the TargetRules object, it will no longer be a dependency to instantiate the platform with this path.
Change 3241895 on 2016/12/21 by Ben.Marsh
UBT: Remove toolchain support for Windows XP.
Change 3241908 on 2016/12/21 by Ben.Marsh
UBT: Move settings for windows targets into a WindowsTargetRules class, which is exposed for targets to modify via the TargetRules.WindowsPlatform field.
Change 3242835 on 2016/12/22 by Ben.Marsh
UBT: Fix multiple binaries being created if plugins specify module names more than once. MfMedia.uplugin has MfMediaFactory listed twice.
Change 3242837 on 2016/12/22 by Ben.Marsh
Change UE4EditorServices to include MacSystemIncludes rather than Cocoa.h directly; causes FVector to be defined incorrectly in non-unity builds.
Change 3242923 on 2016/12/22 by Ben.Marsh
Build: Fixes for conforming incremental workspaces:
* P4 have table is now reset before deleting all the files. This prevents Perforce being out of sync if the delete fails for some reason.
* Incremental workspaces are skipped when running a clean operation, because they do not have a workspace capture file (causing a full re-sync, always). The "P4 Clean" option is still effective for cleaning these workspaces.
Change 3242961 on 2016/12/22 by Ben.Marsh
UBT: Move entry points from PreBuildSync() and PostBuildSync() from UEToolChain to UEBuildPlatform, and make the original toolchain versions static. These functions are already at odds with the rest of the data flow within UBT because they rely on global state cached outside the toolchain instance, making assumptions that UBT is only ever going to be invoked with one target that's constructed in the same run and that nothing is being cached (eg. UBT makefiles). Moving them onto UEBuildPlatform simplifies the toolchain lifecycle for other platforms without leaving Mac and IOS any more limited than they were before.
Change 3242981 on 2016/12/22 by Ben.Marsh
UBT: Remove symbol server handling code into UAT's platform library, since it's never needed from inside UBT.
Change 3242999 on 2016/12/22 by Ben.Marsh
UBT: Remove the StripSymbols() function from the UEToolChain base class. This functionality is only required by UAT, so it's better suited to being exposed through UAT's modular platform classes.
Change 3243022 on 2016/12/22 by Ben.Marsh
UBT: Require an instance of the target rules to be able to construct a toolchain in UBT. This will allow configuring toolchain-specific options from the target, using reflection from config files, and the command line.
Change 3243083 on 2016/12/22 by Ben.Marsh
UBT: Move settings for the Windows compiler version to use onto the Windows-specific target rules.
Change 3243090 on 2016/12/22 by Ben.Marsh
UBT: Change the third party paths in UEBuildConfiguration to constants. Changing these would not work.
Change 3243423 on 2016/12/23 by Ben.Marsh
UBT: Move a lot of settings from BuildConfiguration to TargetRules. This allows different targets to have different settings, naturally, and moves converts argument parsing and config to be driven by attributes.
Change 3243516 on 2016/12/23 by Ben.Marsh
UBT: Remove the ValidateUEBuildConfiguration callback, which is no longer used. (XGE settings validation occurs in XGE.cs)
Change 3244020 on 2016/12/28 by Ben.Marsh
UBT: Remove the BaseIntermediatePath static property. Precursor to removing RelativeEnginePath and IntermediateFolder properties.
Change 3244074 on 2016/12/28 by Ben.Marsh
UBT: Remove the RelativeEnginePath variable from BuildConfiguration. UnrealBuildTool.EngineDirectory gives the absolute path, and can be used to construct a relative path when necessary.
Change 3244076 on 2016/12/28 by Ben.Marsh
UBT: Remove BuildConfiguration.BaseIntermediateFolder; just use a fixed directory everywhere instead.
Change 3244083 on 2016/12/28 by Ben.Marsh
UBT: Replace FileReference and DirectoryReference instance methods for manipulating files and directories with static methods, to mirror the System.IO.File and System.IO.Directory classes.
Change 3244441 on 2016/12/31 by Ben.Marsh
UBT: Remove code to force PDBs when building with no debug info under XGE. Verified described symptoms (that it causes PCH generation to be serialized) no longer occur.
Change 3244687 on 2017/01/03 by Matthew.Griffin
Changed Exception to use FirstInclude.IncludeName as PrecompiledHeaderIncludeFilename can be null when this occurs
Change 3246112 on 2017/01/04 by Ben.Marsh
UBT: Fix UHT failures building some targets with the -useprecompiled option, due to differences in the order that circularly dependent modules are parsed. Precompiled binaries are now kept in the regular AppBinaries list, but are excluded from the build at the last minute. Also change some checks from IsEngineInstalled() to bUsePrecompiled, to prevent headers being overwritten when running in a non-installed precompiled build.
Change 3246223 on 2017/01/04 by Ben.Marsh
UBT: Prevent version manifests being overridden if a file is not being built as part of the target.
Change 3246387 on 2017/01/04 by Ben.Marsh
UBT: Remove BuildConfiguration settings for UnrealCodeAnalyzer. This tool isn't used at the moment, but it's configured using global variables accessed from all over the UBT codebase, making it difficult to refactor the build options into an instanced object. If we bring this tool back from the dead in the future, it should be possible to implement it using the exported JSON target definition or the XGE manifest, similarly to how IncludeTool uses it.
Change 3247004 on 2017/01/04 by Ben.Marsh
UBT: Simplify the logic for cleaning targets in UBT. Now uses FileReference/DirectoryReference objects everywhere, doesn't require the compile/link environment, and does all the checking to avoid deleting precompiled binaries in one place.
Change 3247250 on 2017/01/04 by Ben.Marsh
UBT: Prevent precompiled binaries being added to the list of app binaries twice.
Change 3247594 on 2017/01/05 by Ben.Marsh
Build: Run sample and template editors on the same agents as the other incremental builds. Remove ProtoStar, which does not have any non-precompiled editor target to build.
Change 3247763 on 2017/01/05 by Ben.Marsh
UBT: Allow the toolchain to update the list of build products for each module linked into a binary. Allows Mac to add dylibs and bundle resources specified per-module without having to construct a link environment and try to link them.
Change 3247775 on 2017/01/05 by Ben.Marsh
UBT: Instance the target compile and link environments when they are required during building, and don't persist them on the UEBuildTarget instance.
Change 3247811 on 2017/01/05 by Ben.Marsh
EC: Add a batch file for testing postp filters.
Change 3247839 on 2017/01/05 by Ben.Marsh
EC: Include the name of the file being compiled when parsing MSVC errors and warnings.
Change 3248101 on 2017/01/05 by Ben.Marsh
UBT: Fix Android support for force included headers.
Change 3248533 on 2017/01/05 by Ben.Marsh
PR #3097: UBT project supports optional platforms (Contributed by PrimalJohnScott)
Change 3249205 on 2017/01/06 by Ben.Marsh
UAT: Fix ParseTaggedP4Output throwing an exception if the same key name is specified more than once. This can happen when parsing the output from "P4 INFO", where multiple brokers are present.
Change 3249249 on 2017/01/06 by Ben.Marsh
UBT: Check for the existance of AndroidManifest.xml within extracted AAR directories, rather than just checking for the existance of the directory itself. Perforce does not remove empty directories when cleaning a workspace unless the rmdir option is on the workspace, so this can cause incremental build failures to fail on build machines.
Change 3249486 on 2017/01/06 by Ben.Marsh
UBT: Use relative paths in unity files when compiling for Mac/IOS, rather than generating a separate local/remote version of the file for gathering include dependencies. Absolute paths are only used to work around the way that MSVC concatenates paths internally; we don't hit the same problems when checking dependencies.
Change 3249736 on 2017/01/06 by Ben.Marsh
UBT: Rename CPPEnvironment to CppCompileEnvironment, and remove the separate CPPEnvironmentConfiguration object. All settings are now stored directly on the CppCompileEnvironment object.
Change 3250179 on 2017/01/07 by Ben.Marsh
Fix creating installed build when root directory contains a space in the name.
Change 3250181 on 2017/01/07 by Ben.Marsh
UBT: Remove some esoteric (and unused, AFAIK) options for orthogonally building different platforms.
Change 3250223 on 2017/01/07 by Ben.Marsh
UBT: Merge the LinkEnvironment and LinkEnvironmentConfiguration classes together.
Change 3250233 on 2017/01/07 by Ben.Marsh
UGS: Allow specifying a workspace-specific sync filter, which is applied on top of the standard filter. Also fix filter being cleared if the cancel button is pressed, and help text being stripped out.
Change 3250241 on 2017/01/07 by Ben.Marsh
UBT: Move the options for specifying additional Android architectures to target onto an Android-specific object on the TargetRules.
Change 3250400 on 2017/01/08 by Ben.Marsh
UBT: Move executor config settings onto the executor instances.
Change 3257708 on 2017/01/13 by Ben.Marsh
UBT: Remove the ThirdPartySourceDirectory constant; there are many places which hard-code or assume this location anyway, and it's not going to change.
Change 3260535 on 2017/01/17 by Ben.Marsh
Add an optional "RequiredSubmittedChange" setting to EC settings files. Allows a scheduled job to run even if there have been no code changes submitted. Test with the utilization capture job.
Change 3260875 on 2017/01/17 by Ben.Marsh
EC: Fix workspaces getting out of sync wrt. newly added files when jobs are aborted during a sync. In such cases, the P4 have table indicates the new files have been synced locally, but the workspace is forced back to a state before it had them due to the capture file. When a following sync tries to add them again, P4 believes the workspace already has them synced.
To work around this, we now write an additional file to the root folder of a workspace containing the last CL that was captured, and sync back to it before doing the reconcile.
Change 3261724 on 2017/01/18 by Ben.Marsh
Allow filtering job types from the list view in EC. Hide the utilization capture job by default. Also set up notifications for the utilization capture job.
Change 3261756 on 2017/01/18 by Ben.Marsh
IncludeTool: Prevent matching a full enum declaration as a forward declaration.
Change 3261932 on 2017/01/18 by Ben.Marsh
EC: Add support for specifying days of the week in schedules. The following syntaxes are supported:
"Monday, Tuesday and Wednesday at 10:30"
"Daily except Sunday and Wednesday at 14:30"
Also tweak display of dates relative to now to handle dates/times in the future, and include the date when specifying a day name.
#jira UEB-729
Change 3262676 on 2017/01/18 by Ben.Marsh
UBT: Split UBTMakefile into its own file. (From PR #3106)
Change 3263893 on 2017/01/19 by Ben.Marsh
UBT: Stop exporting platform classes from UBT, as well as all the referenced classes that have to be made public as a result. Any platform-specific functionality that needs to be shared with UAT is now exposed through wrappers in separate public classes, eg. WindowsExports.cs, IOSExports.cs, etc...
Change 3264291 on 2017/01/19 by Ben.Marsh
UBT: Fix errors generating documentation in UBT, and enable it by default. Will catch more errors with new code being added. Originally in PR #3106, but redone due to conflicts.
Change 3264534 on 2017/01/19 by Ben.Marsh
UBT: Include plugin config files in generated projects.
Change 3264571 on 2017/01/19 by Ben.Marsh
UBT: Prevent overwriting .modules files if nothing has changed. On builders, it's common to build multiple editors in the same workspace, and changing the last modified timestamp causes BuildGraph to fail due to tampered files.
Change 3265745 on 2017/01/20 by Ben.Marsh
UGS: Automatically open UGS when running the launcher for a second time, rather than prompting to close the original instance.
Change 3265777 on 2017/01/20 by Ben.Marsh
UGS: Automatically close and reopen when UGS is re-ran with the shift key held down to switch into unstable mode.
Change 3268314 on 2017/01/23 by Ben.Marsh
UBT: Make sure version manifests are stable by sorting the list of build products, so they are only touched if the contents have really changed.
Change 3269601 on 2017/01/24 by Ben.Marsh
UBT: Fix symbol files being added to manifest for some platforms even though debug info is disabled.
Change 3269607 on 2017/01/24 by Ben.Marsh
UBT: Fix bug where UBT would need to be invoked when switching between two editors sharing the same engine binaries on Mac. The location of the .modules file cannot be guessed on Mac by looking in the same directory as the primary output executable because it's an .app bundle, and the actual modules are nested several directories below that.
Change 3269608 on 2017/01/24 by Ben.Marsh
UBT: Fix additional files copied into the app bundle always being updated on Mac. Now uses rsync --checksum to make sure only modified files are updated.
Change 3271062 on 2017/01/24 by Ben.Marsh
UBT: Fixes for bugs detected by PVS Studio (PR #3161)
Change 3272421 on 2017/01/25 by Ben.Marsh
Fix commends regarding DDC in BaseEngine.ini
#jira UE-41076
Change 3272810 on 2017/01/25 by Ben.Marsh
Fix VS2017 being displayed as 'Visual Studio 15' in the Windows target settings panel.
Change 3272935 on 2017/01/25 by Ben.Marsh
Fix Metal errors launching on Mac due to use of OSX environment settings before they are initialized. Toolchain settings are now constructed on demand in a separate class, for Mac, iOS and TVOS.
Change 3274167 on 2017/01/26 by Ben.Marsh
Fix resource files not being compiled in installed builds on Windows. Was causing metadata not to be embedded into executables.
#jira UE-36457
Change 3275557 on 2017/01/27 by Ben.Marsh
Expand checks for propagation of restricted folder names to include source files, and to ensure that each restricted folder is represented in the output. Also improve messaging to show the dependency chain leading to a restricted folder being referenced, and which folder it is.
Change 3275628 on 2017/01/27 by Ben.Marsh
UBT: Splitting configuration files into one class per-file.
Change 3276784 on 2017/01/29 by Ben.Marsh
Add an authoritative list of confidential folder names, and expose it through global BuildGraph properties ($(RestrictedFolderNames) and $(RestrictedFolderFilter)). Also switch existing scripts to use it.
Change 3276792 on 2017/01/29 by Ben.Marsh
UBT: Use UE4CSharp.prog files to indicate which projects should be included in the solution without having to hard-code a list of them in UBT.
Change 3277263 on 2017/01/30 by Ben.Marsh
IncludeTool: Merging various fixes.
* Fix warnings about #include directives after first code block from parsing monolithic headers.
* Fix exception on startup if the intermediate directory does not already exist.
* Add a special case for ignoring missing header guards from MonolithicHeaderBoilerplate.h, rather than marking it as an inline header. Marking it as inline prevents parsing include directives, which results in including CoreTypes.h from the wrong location.
* Create job objects for spawned compiler instances to prevent them trying allocating more memory than the system can spare.
* Remove (unused) code which makes assumptions about files ending with "Classes.h".
* Add a verbose per-file output log to aid with debugging.
* Negate the MakeStandalone command line option, which was added to allow tweaking forward declarations in already optimized files, so the optimized output does not have missing headers by default.
* Fix missing headers when creating standalone files, due to incorrect list of previous files being passed in to the OutputFile constructor. Now passes the original list of included files, not the output list.
* Fix initial header for a cpp file sometimes being removed. Forcibly including a header at the start of the file does not use the normal pathway for spidering through includes, so a second include of the same file was being generated. Any includes of that header were being forced into output, and the earlier include was then removed due to being redundant.
* Prevent forward declaring enums which have to be parsed by UHT. UHT relies on includes to determine a parse order, and will fail if the enum definition has not been parsed first.
* Use a relative path for private includes in the same module if there are any. Fixes some incorrect paths, and makes it clearer that we're doing something we shouldn't.
Change 3277307 on 2017/01/30 by Ben.Marsh
UBT: Fix private PCHs not using correct header. Causes custom definitions to be excluded from the command line.
[CL 3278101 by Ben Marsh in Main branch]
#lockdown Nick.Penwarden
#rb none
==========================
MAJOR FEATURES + CHANGES
==========================
Change 3209340 on 2016/11/23 by Ben.Marsh
Convert UE4 codebase to an "include what you use" model - where every header just includes the dependencies it needs, rather than every source file including large monolithic headers like Engine.h and UnrealEd.h.
Measured full rebuild times around 2x faster using XGE on Windows, and improvements of 25% or more for incremental builds and full rebuilds on most other platforms.
* Every header now includes everything it needs to compile.
* There's a CoreMinimal.h header that gets you a set of ubiquitous types from Core (eg. FString, FName, TArray, FVector, etc...). Most headers now include this first.
* There's a CoreTypes.h header that sets up primitive UE4 types and build macros (int32, PLATFORM_WIN64, etc...). All headers in Core include this first, as does CoreMinimal.h.
* Every .cpp file includes its matching .h file first.
* This helps validate that each header is including everything it needs to compile.
* No engine code includes a monolithic header such as Engine.h or UnrealEd.h any more.
* You will get a warning if you try to include one of these from the engine. They still exist for compatibility with game projects and do not produce warnings when included there.
* There have only been minor changes to our internal games down to accommodate these changes. The intent is for this to be as seamless as possible.
* No engine code explicitly includes a precompiled header any more.
* We still use PCHs, but they're force-included on the compiler command line by UnrealBuildTool instead. This lets us tune what they contain without breaking any existing include dependencies.
* PCHs are generated by a tool to get a statistical amount of coverage for the source files using it, and I've seeded the new shared PCHs to contain any header included by > 15% of source files.
Tool used to generate this transform is at Engine\Source\Programs\IncludeTool.
[CL 3209342 by Ben Marsh in Main branch]
#lockdown Nick.Penwarden
==========================
MAJOR FEATURES + CHANGES
==========================
Change 2945310 on 2016/04/15 by Jon.Nabozny
Fix UI locking Angular Rotation Offset for PhysicsConstraintComponents when the motion is for axes is Free or Locked.
#JIRA UE-29368
Change 2945490 on 2016/04/15 by Jon.Nabozny
Remove extraneous changes introduced in CL-2945310.
Change 2946706 on 2016/04/18 by James.Golding
Checkin of slice test assets
Change 2947895 on 2016/04/19 by Benn.Gallagher
PR #2292: Use ref instead of copy in FAnimNode_ModifyBone::EvaluateBoneTransforms (Contributed by MiKom)
#jira UE-29567
Change 2947944 on 2016/04/19 by Benn.Gallagher
Fixed a few extra needless bone container copies
Change 2948279 on 2016/04/19 by Marc.Audy
Add well defined Map and Set Property names
Change 2948280 on 2016/04/19 by Marc.Audy
Properly name parameters
Change 2948792 on 2016/04/19 by Marc.Audy
Remove unused ini class name settings
Change 2948917 on 2016/04/19 by Aaron.McLeran
UE-29654 FadeIn invalidates Audio Components in 4.11
Change 2949567 on 2016/04/20 by James.Golding
- Add SliceProceduralMesh utility to UKismetProceduralMeshLibrary. It will slice the ProcMeshComp with a plan, including simple collision geom, and optionally create cap geometry, and create an addition ProceduralMeshComponent for the other half
- Add support for simple collision on ProceduralMeshComponent, and added bUseComplexAsSimpleCollision to allow it to be used
- Move GeomTools.h and .cpp from Editor to Engine module, so it can be used at runtime. Also move utils into an FGeomTools namespace.
- Add GetSectionFromStaticMesh and CopyProceduralMeshFromStaticMeshComponent utilities to UKismetProceduralMeshLibrary
- Expose UStaticMesh::GetNumLODs to BP, and add BP exposed UStaticMesh:: GetNumSections function
Change 2950482 on 2016/04/20 by Aaron.McLeran
FORT-22973 SoundMix Fade Time not fading audio properly
- Bug was due to bApplyToChildren case where the FSoundClassAdjuster wasn't getting the interpolated value before calling RecursiveApplyAdjuster in the case of non-overriden sound mixes.
Change 2951102 on 2016/04/21 by Thomas.Sarkanen
Un-deprecated blueprint functions for attachment/detachment
Renamed functions to <FuncName> (Deprecated).
Hid functions in the BP context menu so new ones cant be added.
#jira UE-23216 - "Snap to Target, Keep World Scale" when attaching doesn't work properly if parent is scaled.
Change 2951173 on 2016/04/21 by James.Golding
Fix cap geom generation when more than one polygon is generated
Fix CIS warning in KismetProceduralMeshLibrary.cpp
Change 2951334 on 2016/04/21 by Osman.Tsjardiwal
Add CapMaterial param to SliceProceduralMesh util
Change 2951528 on 2016/04/21 by Marc.Audy
Fix spelling errors in comments
Change 2952933 on 2016/04/22 by Lukasz.Furman
fixed behavior tree getting stuck on instantly finished gameplay tasks
copy of CL# 2952930
Change 2953948 on 2016/04/24 by James.Golding
Put #if WITH_EDITOR back into FPoly::Triangulate to fix non-editor builds (FPoly::Finalize not available in non-editor)
Change 2954558 on 2016/04/25 by Marc.Audy
Make USceneComponent::Attach* members private and remove deprecation messages and pragmas disabling/enabling deprecation throughout SceneComponent.h/cpp
#jira UE-29038
Change 2954865 on 2016/04/25 by Aaron.McLeran
UE-29763 Use HMD audio device only in VR preview mode, not for other PIE session types.
Change 2955009 on 2016/04/25 by Zak.Middleton
#ue4 - Wrap call from UCharacterMovementComponent::PostPhysicsTickComponent() to UpdateBasedMovement() in a FScopedMovementUpdate to accumulate moves with better perf.
Change 2955878 on 2016/04/26 by Benn.Gallagher
[Epic Friday] - Added spherical constraints to anim dynamics
Change 2956380 on 2016/04/26 by Lina.Halper
PR #2298: Step interpolation for UAnimSequence (Contributed by douglaslassance)
Change 2956383 on 2016/04/26 by Lina.Halper
Fixed to match coding standard
Change 2957866 on 2016/04/27 by Zak.Middleton
#ue4 - Add max depenetration distance settings for CharacterMovementComponent. Add controls to throttle logging when character is stuck in geometry so it doesn't spam the log.
- Depenetration settings are separated based on whether overlapping a Pawn versus other geometry, and furthermore by whether the Character is a proxy or not. Simulated proxies typically should not depenetrate a large amount because that effectively ignores the server authoritative location update.
- "Stuck" logging is controlled by the console var "p.CharacterStuckWarningPeriod". Set to number of seconds between logged events, or less than zero to disable logging.
#tests QA-Surfaces multiplayer, walking in to moving objects and pawns.
Change 2957953 on 2016/04/27 by Aaron.McLeran
UE-30018 Fixing up audio component ref-counting to prevent triggering notifications when an audio component is still active after a sound finishes playing.
Change 2958011 on 2016/04/27 by Jon.Nabozny
CalcAABB wasn't properly accounting for current transform on Convex elements, causing bad results.
#JIRA UE-29525
Change 2958321 on 2016/04/27 by Lukasz.Furman
path following update pass, added flags to request result, fixed AITask stacking vs scripted/BP move requests
Change 2959506 on 2016/04/28 by Aaron.McLeran
PR #2330: Fix for ambient sounds not stopping when active and told to play again (Contributed by hgamiel)
Change 2959686 on 2016/04/28 by Marc.Audy
Correctly handle multiple viewpoints when significance is being sorted descending
Change 2959773 on 2016/04/28 by Marc.Audy
Fix shadowing warning
Change 2959785 on 2016/04/28 by Aaron.McLeran
UE-30083 Sound concatenator node doesn't progress if child nodes don't produce wave instances
Change 2960852 on 2016/04/29 by Marc.Audy
Merging //UE4/Dev-Main to Dev-Framework (//UE4/Dev-Framework) @ 2960738
Change 2960946 on 2016/04/29 by Marc.Audy
Fix post merge compile error
Change 2962501 on 2016/05/02 by Marc.Audy
Remove interim GetMutableAttach accessors and use the variables directly now that they are private
Change 2962535 on 2016/05/02 by Marc.Audy
Merging //UE4/Dev-Main to Dev-Framework (//UE4/Dev-Framework) @ 2962478
Change 2962578 on 2016/05/02 by Marc.Audy
Switch ObjectGraphMove to using UserFlags instead of custom move data
Change 2962651 on 2016/05/02 by Marc.Audy
VS2015 shadow variable fixes
Change 2962662 on 2016/05/02 by Lukasz.Furman
deprecated old implementation of gameplay debugger
#jira UE-30011
Change 2962919 on 2016/05/02 by Marc.Audy
VS2015 shadow variable fixes
Change 2963475 on 2016/05/02 by Mieszko.Zielinski
Made SimpleMoveToLocation/Actor not reset velocity if agent not already at goal #UE4
#jira UE-30176
Change 2964098 on 2016/05/03 by Marc.Audy
Spelling fix
Change 2964099 on 2016/05/03 by Marc.Audy
VS2015 shadow variable fixes
Change 2964156 on 2016/05/03 by Marc.Audy
VS2015 shadow variable fixes
Change 2964272 on 2016/05/03 by Marc.Audy
VS2015 Shadow Variable fixes
Change 2964395 on 2016/05/03 by Marc.Audy
VS2015 Shadow Variable Fixes
Change 2964460 on 2016/05/03 by Marc.Audy
Reschedule coolingdown tick functions during pause frames.
#jira UE-30221
Change 2964666 on 2016/05/03 by Marc.Audy
Fix shipping compile error
[CL 2964775 by Marc Audy in Main branch]
Lauren Barnes
Marc Audy
Matt Kuhlenschmidt
sebastian nordgren
brooke hubert
Lina Halper
ryan durand
andrew rodham
max chen
matt hoffman
Thomas Sarkanen
Ben Marsh
Chris Gagnon