FlipperMCE - PCB and Case

This repository contains the pcb files and the case for FlipperMCE - a GameCube Memory Card Emulator.

PCB

Production files (gerbers/bom/cpl) for JLCPCB can be found in the releases section.

When ordering the PCB, make sure to use the following settings:

• 0.8 mm thickness
• ENIG finish

For the "connector" version, a display needs to be ordered separately. Make sure, the display has a 0.5mm pitch with 30 Pins. These displays can be found at aliexpress or other market places.

Case

The case files are located in the case folder. For normal use, you would print:

• FlipperMCE_Bottom_v1.stl
• FlipperMCE_top_v1.stl
• FlipperMCE_Buttons_v1.stl
• either FlipperMCE_DisplayBracket_v1.stl or FlipperMCE_DisplayBracket_alter_v1.stl

Make sure to follow the assembly guide at https://flippermce.github.io .

Special Thanks

Special thanks goes to BitFunX (@gameBitfunx) for providing the pcb and case files for FlipperMCE <3!