Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* v850.h (V850_INVERSE_PCREL): Define.
* v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
destination address by subtracting the operand from the current
address.
* v850-opc.c (insert_u16_loop): Disallow negative offsets. Store
a positive value in the insn.
(extract_u16_loop): Do not negate the returned value.
(D16_LOOP): Add V850_INVERSE_PCREL flag.
(ceilf.sw): Remove duplicate entry.
(cvtf.hs): New entry.
(cvtf.sh): Likewise.
(fmaf.s): Likewise.
(fmsf.s): Likewise.
(fnmaf.s): Likewise.
(fnmsf.s): Likewise.
(maddf.s): Restrict to E3V5 architectures.
(msubf.s): Likewise.
(nmaddf.s): Likewise.
(nmsubf.s): Likewise.
* tic6x-opcode-table.h: Fix patterns for add, ldnw and xor.
* gas/tic6x/insns16-lsd-unit.s: Correct bit patterns for mvk, add
and xor.
* gas/tic6x/insns16-lsd-unit.d: Update expected output.
* tic6x-opcode-table.h: Rename mpydp's specific operand type macro
from ORREGD1324 to ORXREGD1324 and make it cross-path-able through
tic6x_operand_xregpair operand coding type.
Make mpydp instruction cross-path-able, ie: remove the FIXed 'x'
opcode field, usu ORXREGD1324 for the src2 operand and remove the
TIC6X_FLAG_NO_CROSS.
* gas/tic6x/insns-bad-1.s: Remove test-case for mpydp with
cross-path.
* gas/tic6x/insns-bad-1.l: Update expected output.
* gas/tic6x/insns-c674x.s: Add a test-case for mpydp with
cross-path.
* gas/tic6x/insns-c674x.d: Update expected output.
order to encode separately the msb and lsb of a register pair ; this will be
needed to encode the opcodes the same
way as Ti assembler does.
* gas/config/tc-tic6x.c: handle tic6x_coding_dreg_(msb|lsb) field coding types
and use it to encode register pair numbers when required.
* opcodes/tic6x-dis.c: decodes opcodes that have individual msb and lsb halves
in src1 & src2 fields ; discard the src1 (lsb) value and only use src2 (msb),
discarding bit 0, to follow what Ti SDK does in that case as any value in the
src1 field yields the same output with SDK disassembler.
* include/opcode/tic6x-opcode-table.h: modify absdp, dpint, dpsp, dptrunc,
rcpdp and rsqrdp opcodes to use the new field coding types.
* gas/testsuite/gas/tic6x/insns-c674x.d, gas/testsuite/gas/tic6x/insns-c674x.s
: add test case for the newly generated opcode but keep the old ones as they
seem legit as per Ti disassembler output.
* elf.c (elfcore_write_s390_tdb): New function.
(elfcore_write_register_note): Call it.
(elfcore_grok_s390_tdb): New function.
(elfcore_grok_note): Call it.
* readelf.c (get_note_type): Add NT_S390_TDB.
to the plugin API. This patch helps preventing problems while
cherry-picking plugin-api.h changes from trunk gold to local branches.
For instance, a linker plugin compiled with a cherry-picked
plugin-api.h header with some enum values missing will behave
strangely when used with a linker built with the up to date header.
* plugin-api.h (enum ld_plugin_level): Assign integers
explicitly for all values.
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.
* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.
David S. Miller
DJ Delorie
Nick Clifton
Steve Ellcey
Sandra Loosemore
Kyrylo Tkachov
Cary Coutant
Yufeng Zhang
Alan Modra
Sriraman Tallam
Kai Tietz