The DMA column indicates whether DMA card reads are implemented for the platform . Without DMA card reads, some games can have cache related issues.<br>
Note that there are still SDK versions and variants for which Pico Loader does not yet support DMA card reads.
## Setup & Configuration
We recommend using WSL (Windows Subsystem for Linux), or MSYS2 to compile this repository.
The steps provided will assume you already have one of those environments set up.
2. Install [.NET 9.0](https://learn.microsoft.com/en-us/dotnet/core/install/linux-ubuntu-install?tabs=dotnet9&pivots=os-linux-ubuntu-2404) for your system (note: this link points to the instructions for Ubuntu, but links for most OS'es are available on the same page)
## Compiling
1. Run `make`
- By default this compiles for the DSpico platform. To specify a different platform use `make PICO_PLATFORM=PLATFORM`, for example `make PICO_PLATFORM=R4`. See the table above for the supported platforms.
2. To use Pico Loader, create a `_pico` folder in the root of your flashcard SD card and copy the following files to it:
-`picoLoader7.bin`
-`picoLoader9.bin` (the version for your platform)
-`aplist.bin` (generated in the `data` folder of the repo)
-`savelist.bin` (generated in the `data` folder of the repo)
## Emunand
When running DSiWare, Pico Loader redirects NAND to the flashcard SD card. This requires the following files and folders, obtained from a DSi nand dump, in the root of your flashcard SD card:
-`photo` - The photo partition of nand will be redirected to this folder
-`shared1`
-`TWLCFG0.dat`
-`TWLCFG1.dat`
-`shared2`
-`launcher`
-`wrap.bin`
-`sys`
-`log`
-`product.log`
-`shop.log`
-`sysmenu.log`
-`cert.sys`
-`dev.kp`
-`HWID.sgn`
-`HWINFO_N.dat`
-`HWINFO_S.dat`
-`TWLFontTable.dat`
## How to use Pico Loader from homebrew
On the arm9:
1. Map VRAM blocks A, B, C and D to LCDC
2. Load `picoLoader9.bin` to `0x06800000` (VRAM A and B)
3. Load `picoLoader7.bin` to `0x06840000` (VRAM C and D)
4. Setup the header of picoLoader7 to specify what should be loaded. See `pload_header7_t` in [include/picoLoader7.h](include/picoLoader7.h).
- Caution: VRAM does not support byte writes!
5. Disable irqs and dma
6. Ensure the cache is flushed
7. Map VRAM C and D to arm7
8. Request the arm7 to boot into picoLoader7
- Arm7: Disable sound, irqs and dma and jump to the `entryPoint` specified in the picoLoader7 header. Note that after mapping the VRAM to arm7, it appears at `0x06000000` on the arm7 side.
9. Arm9 jump to `0x06800000`
Note that vram must be executable on the arm9.
## License
This project is licensed under the Zlib license. For details, see `LICENSE.txt`.
Additional licenses may apply to the project. For details, see the `license` directory.
