- Use designated CSS parts to style the toggle properly
- Use breadcrumbs_aside block to render dark mode toggle
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds functionality to receive LoRa packets asynchronously. Reception
runs continuously until cancelled by another call to `lora_recv_async`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The OpenThread stack uses uint32_t to calculate expiry time for
alarms, while comparing to zephyr's uint64_t uptime.
This commit fixes broken milliseconds alarms after ~49.7 days of
uptime.
Fixes#39704
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
MEC172x eSPI driver, eSPI pin programming, interrupt updates related
to eSPI and other updates for MEC172x eSPI driver.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Add RSSI member into gsm_ppp_modem_info structure in order to
get that information using the gsm_ppp_modem_info function.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Make modem_info structure public in order to allow the user
to get modem information using gsm_ppp_modem_info function.
Move modem info query commands into separate function
that's called only once during gsm configuring because
there is no necessity to re-querying modem since
they should not change.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
THis patch fixes multiple issues when referencing to the C domain. In
some cases there were typos (e.g. missing :), in some others no domain
syntax was used for referencing, etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After recent changes in the driver, the predefined `data` pointer in
`uarte_nrfx_pm_control()` would not be used in CONFIG_UART_ASYNC_API
configuration. Fix this by replacing `get_dev_data()` calls with
predefined data pointer where applicable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Core Specification 5.3 Vol 3. Part G. 4.2:
The Signed Write Without Response sub-procedure shall only be supported
on the LE Fixed Channel Unenhanced ATT bearer.
This was affecting GATT/SR/GAW/BI-38-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Some shell prints didn't use the correct format for some
values, causing warnings/build errors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Pick those common node in 'fvp-baser-aemv8r.dts' to 'fvp-aemv8r.dtsi'
which reside in 'dts/arm64/fvp-aemv8r' directory.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Some architectures (e.g. RISC-V) has .sdata/.sbss section for small
data/bss. Memory partition should also manage the permission of these
sections in library so they should be put into app_smem.
(For example, newlib _impure_ptr is in .sdata section and
__malloc_top_pad is in .sbss section in RISC-V.)
Signed-off-by: Jim Shu <cwshu@andestech.com>
On the stm32H7 family, there are ADC which have Oversampling ratio
of 10 bits OSVR[9:0] in the CFGR2 register. It means that oversampling
512x or 1024x are possible.
Other values are not allowed as the oversampling field of the struct
adc_sequence (adc.h) is 2^oversampling.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The adc_stm32_oversampling function is used to configure
the ratio and shift for each sequence->oversampling
depending on the soc serie and ADC instance in the serie
In the stm32H7 serie, only ADC3 of ADC_VER_V5_V90 version
have a LL_ADC_OVS_RATIO_x contant (other a 9bit value).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Change the access to the PCSEL register by using the LL function
because on the STM32H7xx soc, some devices have no PCEL register
especially on ADC3 of the stm32H723.
The LL function manages this difference.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a user guide that provides general concepts on pin control, details
on Zephyr model, implementation guidelines, etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable figures enumeration. This option allows to use :numref: in order
to reference figures, thus allowing more precise references other than
"the figure below" or similar.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A pre-defined Doxygen macro allows for better control of what is
included in the final documentation than maintaining a long list of
CONFIG_* entries.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a set of tests to check the API behavior. The API tests can only run
on a platform that does not have an actual pinctrl driver, e.g.
native_posix. The test itself implements a pinctrl mock driver and
provides the required "pinctrl_soc.h" header with required types/macros.
The implementation is used in the tests to verify the behavior of the
API or Devicetree macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When using group based representation on pinctrl nodes, the pin
configuration properties end up being at the grand-children level, so
the `pincfg-node.yaml` file can't be used.
Having a common file that can be used for both cases would require
tooling changes, so for now a copy that operated at the grand-children
level has been created.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for dynamic pin control, that is, allow to change device pin
configuration at runtime. Because no device de-initialization is
available yet, this API has limited usage options, e.g. modify pin
configuration at early boot stage (before device driver is initialized)
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
