Set a dedicated priority for the video_mcux_csi instead of using the
default kernel device init priority. This allows initializing the device
in a sequence that matches the devicetree hirearchy compared to mt9m114.
Fixes the error:
ERROR: /soc/csi@402bc000 POST_KERNEL 50 <
/soc/i2c@403f0000/mt9m114@48 POST_KERNEL 60
found using:
$ west build -p -b mimxrt1064_evk samples/subsys/video/capture \
-DCONFIG_CHECK_INIT_PRIORITIES=y
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
video_mcux_csi_init, which setups the CSI pins (i.e: calls
pinctrl_apply_state) was called after mt9m114_init which tries to do i2c
communication with the camera to read the chip id. But since one of the
CSI pins is the camera master clock, doing things in this order won't
work. This PR inverts the order in which the devices are initialized.
Signed-off-by: Michele Balistreri <michele@bitgamma.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update video drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Replace sensor_label property in devicetree with just a sensor phandle
property. This is more generic and allows driver to use DEVICE_DT_GET
instead of device_get_binding.
Signed-off-by: Kumar Gala <galak@kernel.org>
When we moved to gpio_dt_spec forgot to remove the older
fields used for gpio related access. Remove them as they
are used by the driver anymore.
Signed-off-by: Kumar Gala <galak@kernel.org>
Updates the API and types to match updated I2C terminology. Replaces master
with controller and slave with target.
Updates all drivers to match the changed macros, types, and API signatures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds the driver for Omnivision OV2640 image sensor.
The driver provides support for 10 different resolutions in range from
160x120 to 1600x1200 in both JPEG and RGB565 pixel formats. There are
also mutliple configuration options, e.g. hflip, vflip, saturation and
brightness control.
Signed-off-by: Robert Szczepanski <rszczepanski@antmicro.com>
