Test that `pm_device_driver_init` puts devices into the appropriate
state depending on the devicetree configuration.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the expected power domain behaviour in the tests in line with
the driver implementation changes.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Startup power domains according to the expected final state given the
power supply and PM device runtime support.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Let the driver compile without `PM_DEVICE_POWER_DOMAIN`, in which case
the driver only controls the GPIO, without notifying dependant devices.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds a helper function for initializing devices into the expected power
state, through the devices `pm_device_action_cb_t`. This eliminates code
duplication between the init functions and the PM callback.
The expected device states in order of priority are:
* No power applied to device, `OFF`
* `zephyr,pm-device-runtime-auto` enabled, `SUSPEND`
* Otherwise, `ACTIVE`
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Implement `gpio_pin_get_config` for the stellaris platform, and by
extension `qemu_cortex_m3`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This is a follow-up to commit 4c20403629.
CONTAINER_OF() cannot be used to obtain the device pointer from its
data pointer as this data is not contained in the device structure.
Instead, use a dedicated member in the device data structure to store
the device pointer.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for flash NOR memory devices on a NXP S32 QSPI bus. The
driver uses a fixed LUT configuration assuming a default standard page
size and erase types, and allows to select between multiple read/program
instructions/modes. It is also possible to read the flash device
characteristics from the device at run-time as long as the memory is
JESD216 compatible, providing more flexibility.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The NXP S32 QSPI controller acts as an interface to up to two serial
flash memory devices, each with up to eight bidirectional data lines,
depending on the platform. It is based on a LUT enginee to interface
through commands with different memory types including flash NOR and
Hyperram.
This patch adds support for the QSPI in S32K344 which supports a single
memory device (side A) with up to four bidirectional data lines and SDR
only. Nevertheless, the memory controller is implemented flexible enough
to be extended to support more feature-rich QSPI blocks.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add Kconfig RISCV_SOC_HAS_CUSTOM_SYS_IO symbol so that a riscv
SoC can set to specify that it has a custom implementation for
sys_io functions.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This commit aligns TWIM shim to utilize memory-region property.
The memory-region is not required property that enables user
to specify placement of dma buffers in memory region.
It is done by assigning to memory-region property,
phandle to node with zephyr,memory-region and mimo-sram compatible.
When memory-region property is not specified for given
instance, buffer is placed in default RAM region with other data.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
There are two different i2c node properites `zephyr,flash-buf-max-size`
and `zephyr,concat-buf-size`. In the end max value of that two is used
to define size of the message buffer.
It's redundant to store both values in device config structure.
Changed config structure to contain only bigger value.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Variant of JSON_OBJ_DESCR_ARRAY_ARRAY that can be used when the
structure and JSON field names differ.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add initial version of Infineon CAT1 counter driver
Add initial version of binding file for Infineon
Add counters to psco6 dtsi
Add external trigger pin that runs counter
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
