Add UDC driver for STM32 based MCU, relying on HAL/PCD.
This has been tested with cdc_acm sample on the following boards:
- 96b_carbon (STM32F4)
- disco_l475_iot1 (STM32L4)
- nucleo_wb55rg (STM32WB)
- nucleo_h723zg (STM32H7)
- stm32f3_disco (STM32F3)
This fails at runtime for the following:
- b_u585i_iot2a (STM32U5)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This change corrects the it82xx2 resumed/suspended mechanism and power
policy flow. The sof package is used to judge if the device can be set as
suspended state. If there is no sof package received(suspended), the chip
power policy is set as standby(deep doze) mode. Meanwhile, the USB D+
interrupt is enabled. The interrupt is triggered at resume signal(from J
to K state). Chip sets its power state as active(doze) mode and disable
the interrupt.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Quite a few of the drivers meant for the POSIX arch
interacted with the host directly, and will not
work when we use an embedded libC.
Until we fix them, let's add the appropriate
kconfig dependencies to avoid users trying to build them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
NO_CACHE cannot be selected for certain cores.
Use ARCH_HAS_NOCACHE_MEMORY_SUPPORT as the condtion
to select NO_CACHE config
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
1. Fix the reset function to reset correctly.
2. Ensure the controller handle is initialized before
calling the SDK functions.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fail requests if the data does not fit inside buffer.
This commit only adds missing sanity checks but the native posix driver
remains broken at the design level. The amount of work to fix the native
posix driver in legacy USB stack is deemed too great to be worth it.
Coverity-CID: 195841, GitHub issue #58564
Coverity-CID: 240244, GitHub issue #58570
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Increase the size of the MCUX USB driver thread stack if using
the CONFIG_USB_DEVICE_LOG_LEVEL_DBG Kconfig, to avoid stack overflow
caused by many stack frames coming from the debug logs.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Per Kinetis USB reference manual, when USB reset interrupt is asserted,
the driver should configure and enable the default USB control endpoint
0. Generally, when the reset interrupt is asserted, endpoint 0 is
already configured so the driver only needs to reenable it.
However, when usb_dc_detach is called and the module is reset, all endpoint
configuration will be reset. Thus, we need to manually configure USB
endpoint 0 when a USB reset interrupt is received, or the USB driver
will not function correctly after usb_dc_detach has been called.
Additionally, do not zero out all BDT entries in the usb_dc_reset
function. BDT entries are zeroed when an endpoint is configured, and
clearing BDT buffer pointers during device reset will cause a memory
leak.
Fixes#58407
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use CONFIG_USB_DC_NXP_LPCIP3511 instead of FSL_FEATURE_USB_USB_RAM
as the behaviour variation is based on the SDK driver used and not
if the SoC has a dedicated USB SRAM.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Conditionally enable the USB_DC_HAS_HS_SUPPORT as the
USB_DC_NXP_LPCIP3511 controller can have both HS and FS only.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a USB device controller driver skeleton to use as a starting point
for implementing a specific driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Only UVB_EVT_REQUEST type passes the pkt argument.
This was overlooked in the last refactoring and
resulted in a zero pointer dereference.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit is a draft to support more controller implementations
with these drivers. The goal is also to make it easier to port
this driver to the new UDC API later.
We use compatible, like st,stm24f4-fsotg to support and enable
vendor-specific quirk. The core of the driver remains generic,
and therefore described and enabled by snps,dwc2 compatible.
STM32F4 support requires PINCTRL, even though pinctrl API is
generic, not all platforms implement it, so we have to include
and compile it conditionally.
Now we also switch to use new snps,dwc2 compatible and
explicitly force the controller into device mode,
as we do not support other roles or role changes.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add definition for GHWCFG1..4 registers to be able to obtain basic
information about PHY, endpoints, and Data FIFO.
Add GGPIO defines for STM32F4 SoC family USB controllers.
This implementation uses GGPIO to enable transceiver, VBUS
detection, and a few other functions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Align and sort defines according to the position in memory.
Remove unnecessary parentheses.
Fix USB_DW_DSTS_ENUM_SPD_MASK.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Cleanup includes, fix build and missing kernel header include.
Move copyright notice to the top.
USB_DW_* macros are a bit misplaced in register header,
which is supposed to be about registers only.
USB_DW macro is used to point to base of controller register set.
Move it to driver code and add a new variable in driver's configuration
that takes the base address of the instance. This also makes later
porting to UDC API and support multiple instances easier.
Remove redundant DW_USB_IN_EP_NUM and DW_USB_OUT_EP_NUM
macros. Do not limit number of endpoint register in
struct usb_dw_in_ep_reg as it does not reflect common
register mapping of the controller.
Fix build warnings caused by USB_DW_EP_FIFO and use base variable
to calculate data FIFO access register.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add charging mode support the PI3USB9201 emulator and add a backend API
for connecting/disconnecting a portable device partner.
Signed-off-by: Keith Short <keithshort@google.com>
