Cache the delimiter string length in `parse_params`, instead of
calculating it on each character in the match buffer.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Given the following response: `+CIPSTA:ip6ll:"FE80::EDC:7EFF:FEDD:110C"`
The response delimiter is `:`, but there is also a quoted string that
contains the delimiter character. These delimiters should not be
considered when searching for the end of a parameter.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
In case of BG95 where there is no reset pin, reseting the board
which uses a BG95 modem could result in powering-off the modem
(as oposed to "reset" the modem). This commit is an attempt
to handle this case and re-power the modem.
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
Using bg9x driver with bg95 specifically has the issue that BG95
modem replies with "RDY" when it's not fully initialized and AT
commands sent to the modem after this point would result in modem
reply of "ERROR". This commit adds a new prj.conf field in the build
configuration for custom unsolicited app ready string, with
the default being BG96 one ("RDY").
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
The BG95 pin configuration does not internally ever use the reset pin.
Because of this, there is no need to make reset pin mandatory.
Commit removes reset pin dependency [e.g. in case of BG95].
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
Re-enable reception on the UART instance when `UART_RX_DISABLED`
triggers, which can happen when errors occur on the line.
This stops the driver permanently moving into an unresponsive state.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix link error when both modems' drivers are enabled
as they both define the same structure but did not
make it static.
This fixes the CI build failure of
tests/drivers/build_all/modem/drivers.modem.simcom_sim7080.build
on particle_boron
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the following build warning:
include <fcntl.h> without CONFIG_POSIX_API
is deprecated. Please use CONFIG_POSIX_API
or #include <zephyr/posix/fcntl.h>
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When building drivers.modem.build we get a link error since
log_source_id_get() is not defined when CONFIG_LOG_MODE_MINIMAL
is defined.
Change ifdef protection to be CONFIG_LOG_RUNTIME_FILTERING
instead of CONFIG_LOG in the code to handle this case.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
When building with arm-clang we get warnings of the type:
wncm14a2a.c:828:14: error: array subscript is of type
'char' [-Werror,-Wchar-subscripts]:
} else if (isalpha(c2) != 0) {
^~~~~~~~~~~
Fix this by adding explicit casts to (int) when callinng isalpha()
or isdigit().
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The internal socket context struct modem_socket_config
currently has members accessed directly by user. The
modem_socket_init() function has been updated to take all
user configurations as args. Thus removing the need for
the user to directly access the internal context for
initialization.
The user also currently needs to know of internal modem
socket libary behavior to determine if a socket has been
allocated and assigned an id, this is documented, and is
not safe. The functions:
modem_socket_is_allocated()
modem_socket_id_is_assigned()
modem_socket_id_assign()
have been added to the modem socket library API to perform
these checks, and to assign socket ids.
This commit makes use of the modem socket library safer and
adds documentation to the API.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
There is currently not a clear separation between
user configuration and internal context when using the
modem_cmd_handler library. This update adds a clear
separation, placing user configuration in a seperate
struct passed to modem_cmd_handler_init alongside the
internal context modem_cmd_handler_data.
There is also a lack of documentation of the user
configurations, these have been added to the new config
struct.
The new API function modem_cmd_handler_process has been
added to remove the need for the user to directly access
the process member of the internal context. This ensures
that the user is not encouraged to access any internal
context members.
Some whitespace errors exist in the modem_cmd_handler.c
file, these are outside of the scope of this PR. These
can be addressed in a later PR as they are not functional
changes.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
The UART IFACE API currently exposes the context struct
modem_iface_uart_data, expecting the user to fill in some
of the fields, with no documentation specifying which fields
and what they mean.
This API update moves all user configurable values in the context
out into a config struct, modem_iface_uart_config, within which
members are documented.
This prevents the user from interacting directly with the context
making use of the library safer and more readable.
The config structure helps make code readable by using "named args"
in a const struct instead of a long, nameless, parameter list passed
to the modem_iface_uart_init function.
The new API function modem_iface_uart_rx_wait is added to prevent the
user from having to interact with the rx sem in the context directly.
The context can now be safely interated with without direct access to
any of its members.
Pointers to the ring buffer params in the context have been moved to
config struct, as these are only useful during initialization of the
context.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Fix DNS resolver config for IPv6 only setup.
Check validity of the DNS addresses before trying to
configure the resolver.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Ensure DNS resolver is stopped if modem is turned off.
All IO connected to the HL7800 need to be de-asserted
in order for the HL7800 to power off.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
PSM hibernate mode would draw excessive current
because the UART would be enabled if CTS went low.
In hibernate mode, do not use CTS to power on the UART.
Fix reading of input pin states for low power by reading
the raw value.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
