Not all toolchains support newlib so tests that require newlib need
to have a filter to we don't try and build those tests on those
testcases. Add the following to samples.yaml to handle the issue:
filter: TOOLCHAIN_HAS_NEWLIB == 1
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
When running the testcase libraries.hash_map.newlib.cxx_unordered_map.djb2
of this samples/basic/hash_map, it appears that some platforms
have a too low stack size.
This PR is increasing that value to pass the testcase.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The fractional part of the divider value is a 4 bit value. Setting it to
255 leads to an overflow in pwm_rpi_get_clkdiv(). This has resulted in a
slight deviation from the reported timing, which is btw. printed in nsec.
Fixes: c5cb0d1a3b ("samples: blinky_pwm: Fix sample for rpi_pico")
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
Switch to using the dedicated `gpio_is_ready_dt`
function instead of the raw `device_is_ready`.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Switch to using the dedicated `gpio_is_ready_dt`
function instead of the raw `device_is_ready`.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes the channel 2 PWM pinmux adds servos and PWM LEDs.
Required to operate servo motors and status lighting.
Tested on RDDRONE board.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Sumit Batra <sumit.batra@nxp.com>
Co-authored-by: Landon Haugh <landon.haugh1@gmail.com>
The RP2040 needs a DTS overlay for the PWM to work with the
blinky_pwm examples. This commit adds the required overlay.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The commit bfb1040612 has renamed the
sample blink_led to blinky_pwm, however, the project still have the
former name: blink_led.
This renames the project to its new name: blinky_pwm.
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Use dts overlay to declare the pwm-led only when needed.
This is only used for demo purpose of PWM0 on RCAR gen3
boards (H3ULCB only at the moment).
Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Replace access to dts 'label' property (which we are phasing out)
with simple int as the serve the purpose for error report.
Signed-off-by: Kumar Gala <galak@kernel.org>
Updates device tree pin states definitions and node
descriptions to group pins sharing common properties.
Accordingly, updates in-tree overlays as well.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Updates device tree pin states definitions and node
descriptions to group pins sharing common properties.
Accordingly, updates in-tree overlays as well.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
- update device tree pin states definitions and node
descriptions to group pins sharing common properties.
- update ESP32's in-tree overlays.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Add overlay for espressif boards that does not have a built-in LED.
Add instructions on README file about the required LED connection.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
This commit moves the hardware configuration for ledc
peripheral to the device-tree instead of Kconfig.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
