This doesn't matter that much, because set-property --global does not work,
so at least those paths wouldn't be used automatically. It is still possible
to create such snippets manually, so we better fix this.
Remote= must be a non multicast address. ip-link(8) says:
> remote IPADDR - specifies the unicast destination IP address to
> use in outgoing packets when the destination link layer address
> is not known in the VXLAN device forwarding database.
Closes#8088.
Changed <filename>.service</filename> to <literal>.service</literal> to match style in other manual pages: man 5 systemd.socket, device, mount, automount, swap, target path, timer, slice and scope.
LOG_FAC() is the general way to extract the logging facility (when it has
been combined with the logging priority).
LOG_FACMASK can be used to mask off the priority so you only have the
logging facility bits... but to get the logging facility e.g. LOG_USER,
you also have to bitshift it as well. (The priority is in the low bits,
and so only requires masking).
((priority & LOG_FACMASK) == LOG_KERN) happens to work only because
LOG_KERN is 0, and hence has the same value with or without the bitshift.
Code that relies on weird assumptions like this could make it harder to
realize how the logging values are treated.
Changed "reboot" to "power off" in poweroff.target description. It was most likely copied and pasted from the reboot.target below, compare with e.g. halt.target
Previous code was using the basename(id->fragment_path) which returned
incorrect result if the unit was an instance.
For example, assuming that no instances of "template" have been created so far:
$ systemctl enable template@1
Created symlink from /etc/systemd/system/multi-user.target.wants/template@1.service to /usr/lib/systemd/system/template@.service.
$ systemctl is-enabled template@3.service
disabled
$ systemctl status template@3.service
● template@3.service - openQA Worker #3
Loaded: loaded (/usr/lib/systemd/system/template@.service; enabled; vendor preset: disabled)
[...]
Here the unit file states reported by "status" and "is-enabled" were different.
We have the raw_getpid() definition in place anyway, and it's certainly
beneficial to expose the same semantics on pre glibc 2.24 and after it
too, hence always bypass glibc for this, and always cache things on our
side.
Fixes: #8113
For quite a while now, there have been file triggers to handle
automatically setting up service units in upstream systemd. However,
most of the actions being done by these macros upon files can be set up
as RPM file triggers.
In fact, in Mageia, we had been doing this for most of these. In particular,
we have file triggers in place for sysusers, tmpfiles, hwdb, and the journal.
This change adds Lua versions of the original file triggers used in Mageia,
based on the existing Lua-based file triggers for service units.
In addition, we can also have useful file triggers for udev rules, sysctl
directives, and binfmt directives. These are based on the other existing
file triggers.
This is similar to 3c3d384ae9 and
a workaround for the following warning.
```
In file included from ../src/basic/in-addr-util.h:28,
from ../src/nss-mymachines/nss-mymachines.c:31:
../src/nss-mymachines/nss-mymachines.c: In function '_nss_mymachines_getgrnam_r':
../src/nss-mymachines/nss-mymachines.c:653:32: warning: argument to 'sizeof' in 'memset' call is the same pointer type 'char *' as the destination; expected 'char' or an explicit length [-Wsizeof-pointer-memaccess]
memzero(buffer, sizeof(char*));
^~~~
../src/basic/util.h:118:39: note: in definition of macro 'memzero'
#define memzero(x,l) (memset((x), 0, (l)))
^
../src/nss-mymachines/nss-mymachines.c: In function '_nss_mymachines_getgrgid_r':
../src/nss-mymachines/nss-mymachines.c:730:32: warning: argument to 'sizeof' in 'memset' call is the same pointer type 'char *' as the destination; expected 'char' or an explicit length [-Wsizeof-pointer-memaccess]
memzero(buffer, sizeof(char*));
^~~~
../src/basic/util.h:118:39: note: in definition of macro 'memzero'
#define memzero(x,l) (memset((x), 0, (l)))
^
```
Found by the following warning by gcc.
```
../src/network/networkd-manager.c: In function 'dhcp6_prefixes_compare_func':
../src/network/networkd-manager.c:1383:16: warning: 'memcmp' reading 16 bytes from a region of size 8 [-Wstringop-overflow=]
return memcmp(&a, &b, sizeof(*a));
^
```
Before this, each ExecRuntime object is owned by a unit. However,
it may be shared with other units which enable JoinsNamespaceOf=.
Thus, by the serialization/deserialization process, its sharing
information, more specifically, reference counter is lost, and
causes issue #7790.
This makes ExecRuntime objects be managed by manager, and changes
the serialization/deserialization process.
Fixes#7790.
Let the journal capture messages emitted by systemd, before it ran
exec("/usr/lib/systemd/systemd-journald"). Usually such messages will only
appear with `systemd.log_level=debug`. kmsg lines written after the exec()
will be ignored as before.
In other words, we are avoiding reading our own lines, which start
"systemd-journald[100]: " assuming we are PID 100. But now we will start
allowing ourself to read lines which start "systemd[100]: ", or any other
prefix which is not "systemd-journald[100]: ".
So this can't help you see messages when we fail to exec() journald :). But,
it makes it easier to see what the pre-exec() messages look like in
the successful case. Comparing messages like this can be useful when
debugging. Noticing weird omissions of messages, otoh, makes me anxious.
