Handle architectures that are not cache coherent directly in the main
swiotlb code by calling arch_sync_dma_for_{device,cpu} in all the right
places from the various dma_map/unmap/sync methods when the device is
non-coherent.
Because swiotlb now uses dma_direct_alloc for the coherent allocation
that side is already taken care of by the dma-direct code calling into
arch_dma_{alloc,free} for devices that are non-coherent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
All architectures that support swiotlb also have a zone that backs up
these less than full addressing allocations (usually ZONE_DMA32).
Because of that it is rather pointless to fall back to the global swiotlb
buffer if the normal dma direct allocation failed - the only thing this
will do is to eat up bounce buffers that would be more useful to serve
streaming mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Remove the somewhat useless map_single function, and replace it with a
swiotlb_bounce_page handler that handles everything related to actually
bouncing a page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
No need to duplicate the code - map_sg is equivalent to map_page
for each page in the scatterlist.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Like all other dma mapping drivers just return an error code instead
of an actual memory buffer. The reason for the overflow buffer was
that at the time swiotlb was invented there was no way to check for
dma mapping errors, but this has long been fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
All properly written drivers now have error handling in the
dma_map_single / dma_map_page callers. As swiotlb_tbl_map_single already
prints a useful warning when running out of swiotlb pool space we can
also remove swiotlb_full entirely as it serves no purpose now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
This comments describes an aspect of the map_sg interface that isn't
even exploited by swiotlb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Respect the DMA_ATTR_NO_WARN flags for allocations in dma-direct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
I recently debugged a DMA mapping oops where a driver was trying to map
a buffer returned from request_firmware() with dma_map_single(). Memory
returned from request_firmware() is mapped into the vmalloc region and
this isn't a valid region to map with dma_map_single() per the DMA
documentation's "What memory is DMA'able?" section.
Unfortunately, we don't really check that in the DMA debugging code, so
enabling DMA debugging doesn't help catch this problem. Let's add a new
DMA debug function to check for a vmalloc address or an invalid virtual
address and print a warning if this happens. This makes it a little
easier to debug these sorts of problems, instead of seeing odd behavior
or crashes when drivers attempt to map the vmalloc space for DMA.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It appears that in commit 9d7a224b46 ("dma-direct: always allow dma mask
<= physiscal memory size") the logic of the test was changed from a "<" to
a ">=" however I don't see any reason for that change. I am assuming that
there was some additional change planned, specifically I suspect the logic
was intended to be reversed and possibly used for a return. Since that is
the case I have gone ahead and done that.
This addresses issues I had on my system that prevented me from booting
with the above mentioned commit applied on an x86_64 system w/ Intel IOMMU.
Fixes: 9d7a224b46 ("dma-direct: always allow dma mask <= physiscal memory size")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This way an architecture with less than 4G of RAM can support dma_mask
smaller than 32-bit without a ZONE_DMA. Apparently that is a common
case on powerpc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Instead of rejecting devices with a too small bus_dma_mask we can handle
by taking the bus dma_mask into account for allocations and bounce
buffering decisions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need to take the DMA offset and encryption bit into account when
selecting a zone. User the opportunity to factor out the zone
selection into a helper for reuse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
This is somewhat modelled after the powerpc version, and differs from
the legacy fallback in use fls64 instead of pointlessly splitting up the
address into low and high dwords and in that it takes (__)phys_to_dma
into account.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
We can use the arch_dma_coherent_to_pfn hook to provide a ->get_sgtable
implementation. Note that this isn't an endorsement of this interface
(which is a horrible bad idea), but it is required to move arm64 over
to the generic code without a loss of functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The only functional differences (modulo a few missing fixes in the arch
code) is that architectures without coherent caches need a hook to
convert a virtual or dma address into a pfn, given that we don't have
the kernel linear mapping available for the otherwise easy virt_to_page
call. As a side effect we can support mmap of the per-device coherent
area even on architectures not providing the callback, and we make
previous dangerous default methods dma_common_mmap actually save for
non-coherent architectures by rejecting it without the right helper.
In addition to that we need a hook so that some architectures can
override the protection bits when mmaping a dma coherent allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
All the cache maintainance is already stubbed out when not enabled,
but merging the two allows us to nicely handle the case where
cache maintainance is required for some devices, but not others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
Various architectures support both coherent and non-coherent dma on a
per-device basis. Move the dma_noncoherent flag from the mips archdata
field to struct device proper to prepare the infrastructure for reuse on
other architectures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch adding the infrastructure failed to actually add the symbol
declaration, oops..
Fixes: faef87723a ("dma-noncoherent: add a arch_sync_dma_for_cpu_all hook")
Signed-off-by: Christoph Hellwig <hch@lst.de>
early_cma does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "cma", without
its value, is set in command line and thus causes the following panic.
PANIC: early exception 0xe3 IP 10:ffffffffa3e9db8d error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-yocto-standard+ #7
[ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[ 0.000000] Call Trace:
[ 0.000000] simple_strtoull+0x29/0x70
[ 0.000000] memparse+0x26/0x90
[ 0.000000] early_cma+0x17/0x6a
[ 0.000000] do_early_param+0x57/0x8e
[ 0.000000] parse_args+0x208/0x320
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_options+0x29/0x2d
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_param+0x36/0x4d
[ 0.000000] setup_arch+0x336/0x99e
[ 0.000000] start_kernel+0x6f/0x4e6
[ 0.000000] x86_64_start_reservations+0x24/0x26
[ 0.000000] x86_64_start_kernel+0x6f/0x72
[ 0.000000] secondary_startup_64+0xa4/0xb0
This patch adds a check to prevent the panic.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
This goes through a lot of hooks just to call arch_teardown_dma_ops.
Replace it with a direct call instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
There is no good reason for this indirection given that the method
always exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
