Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables the TI TAS2781 amplifier SoC for the ASUS ROG ALLY X.
This is a design change from the original ASUS ROG ALLY, creating the need
for this patch. All other Realtek Codec settings seem to be re-used from
the original ROG ALLY design (on the ROG ALLY X). This patch maintains the
previous settings for the Realtek codec portion, but enables the I2C
binding for the TI TAS2781 amplifier (instead of the Cirrus CS35L41 amp
used on the original ASUS ROG ALLY).
One other requirement must be met for audio to work on the ASUS ROG ALLY X.
A proper firmware file in the correct location with a proper symlink. We
had reached out to TI engineers and confirmed that the firmware found in
the Windows' driver package has a GPL license. Bazzite Github is hosting
this firmware file for now until proper linux-firmware upstreaming can
occur. https://github.com/ublue-os/bazzite
This firmware file should be placed in
/usr/lib/firmware/ti/tas2781/TAS2XXX1EB3.bin with a symlink to it from
/usr/lib/firmware/TAS2XXX1EB3.bin
Co-developed by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Co-developed by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Richard Alvarez <alvarez.richard@gmail.com>
Tested-by: Miles Montierth <cyber_dopamine@intheblackmedia.com>
Signed-off-by: Jonathan LoBue <jlobue10@gmail.com>
Link: https://patch.msgid.link/20240812045325.47736-1-jlobue10@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of these laptop models have quirk IDs that are identical but have
different amplifier parts fitted, this difference is described in the
ACPI information.
The solution introduced for this product family can derive the required
component binding information from ACPI instead of hardcoding it,
supports the new variants of the CS35L56 being used and has generalized
naming that makes it applicable to other ALC+amp combinations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802152215.20831-4-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
spi: Add empty versions of ACPI lookup functions
A patch from Richard Fitzgerald adding dummy versions of the ACPI lookup
functions for SPI:
Provide empty versions of acpi_spi_count_resources(),
acpi_spi_device_alloc() and acpi_spi_find_controller_by_adev()
if the real functions are not being built.
This commit fixes two problems with the original definitions:
1) There wasn't an empty version of these functions
2) The #if only depended on CONFIG_ACPI. But the functions are implemented
in the core spi.c so CONFIG_SPI_MASTER must also be enabled for the real
functions to exist.
Pull x86 fixes from Thomas Gleixner:
- Fix 32-bit PTI for real.
pti_clone_entry_text() is called twice, once before initcalls so that
initcalls can use the user-mode helper and then again after text is
set read only. Setting read only on 32-bit might break up the PMD
mapping, which makes the second invocation of pti_clone_entry_text()
find the mappings out of sync and failing.
Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.
- Don't make acpi_mp_wake_mailbox read-only after init as the mail box
must be writable in the case that CPU hotplug operations happen after
boot. Otherwise the attempt to start a CPU crashes with a write to
read only memory.
- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.
Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.
* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed MTRRs exist before saving them
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
x86/mm: Fix PTI for i386 some more
Pull time keeping fixes from Thomas Gleixner:
- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This
results in integer overflows and eventualy NTP getting out of sync.
According to the history the sanity checks had been removed in favor
of clamping the values, but the clamping never worked correctly under
all circumstances. The NTP people asked to not bring the sanity
checks back as it might break existing applications.
Make the clamping work correctly and add it where it's missing
- If adjtimex() sets the clock it has to trigger the hrtimer subsystem
so it can adjust and if the clock was set into the future expire
timers if needed. The caller should provide a bitmask to tell
hrtimers which clocks have been adjusted.
adjtimex() uses not the proper constant and uses CLOCK_REALTIME
instead, which is 0. So hrtimers adjusts only the clocks, but does
not check for expired timers, which might make them expire really
late. Use the proper bitmask constant instead.
* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
ntp: Safeguard against time_constant overflow
ntp: Clamp maxerror and esterror to operating range
Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:
- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"
* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero
Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link
Pull char/misc fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
spmi: pmic-arb: add missing newline in dev_err format strings
spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
binder_alloc: Fix sleeping function called from invalid context
binder: fix descriptor lookup for context manager
char: add missing NetWinder MODULE_DESCRIPTION() macros
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
eeprom: ee1004: Fix locking issues in ee1004_probe()
fsi: add missing MODULE_DESCRIPTION() macros
Pull SCSI fixes from James Bottomley:
"Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change.
And one driver fix in ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep the discard mode stable
scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563 ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull nfsd fixes from Chuck Lever:
- Two minor fixes for recent changes
* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
sunrpc: avoid -Wformat-security warning
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
Pull dma-mapping fix from Christoph Hellwig:
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
* tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: avoid deadlock between dma debug vs printk and netconsole
Pull more bcachefs fixes from Kent Overstreet:
"A couple last minute fixes for the new disk accounting
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so
we can fix this with another version bump"
* tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs:
bcachefs: bcachefs_metadata_version_disk_accounting_v3
bcachefs: improve bch2_dev_usage_to_text()
bcachefs: bch2_accounting_invalid()
bcachefs: Switch to .get_inode_acl()
