Hangbin Liu says:
====================
ipv6: fix temporary address not removed correctly
Currently the temporary address is not removed when mngtmpaddr is deleted
or becomes unmanaged. The patch set fixed this issue and add a related
test.
v2:
1) delete the tempaddrs directly instead of remove them in addrconf_verify_rtnl(Sam Edwards)
2) Update the test case by checking the address including, add Sam in SOB (Sam Edwards)
====================
Link: https://patch.msgid.link/20241120095108.199779-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test to check the temporary address could be added/removed
correctly when mngtempaddr is set or removed/unmanaged.
Signed-off-by: Sam Edwards <cfsworks@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC8981 section 3.4 says that existing temporary addresses must have their
lifetimes adjusted so that no temporary addresses should ever remain "valid"
or "preferred" longer than the incoming SLAAC Prefix Information. This would
strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or
un-flagged as such, its corresponding temporary addresses must be cleared out
right away.
But now the temporary address is renewed even after ‘mngtmpaddr’ is removed
or becomes unmanaged as manage_tempaddrs() set temporary addresses
prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings
failed to remove the addresses. Fix this by deleting the temporary address
directly for these situations.
Fixes: 778964f2fd ("ipv6/addrconf: fix timing bug in tempaddr regen")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Justin Lai says:
====================
Correcting switch hardware versions and reported speeds
This patch set mainly involves correcting switch hardware versions and
reported speeds.
Details are as follows:
1. Refactor the rtase_check_mac_version_valid() function.
2. Correct the speed for RTL907XD-V1
3. Corrects error handling of the rtase_check_mac_version_valid()
v1 -> v2:
- Add Fixes: tag.
- Add defines for hardware version id.
- Modify the error message for an invalid hardware version ID.
v2 -> v3:
- Remove the patch "Add support for RTL907XD-VA PCIe port".
v3 -> v4:
- Modify commit message to describe the main reason for the fix.
v4 -> v5
- Integrate the addition of defines for hardware version ID into the patch
"rtase: Refactor the rtase_check_mac_version_valid() function."
====================
Link: https://patch.msgid.link/20241120075624.499464-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Previously, when the hardware version ID was determined to be invalid,
only an error message was printed without any further handling. Therefore,
this patch makes the necessary corrections to address this.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Previously, the reported speed was uniformly set to SPEED_5000, but the
RTL907XD-V1 actually operates at a speed of SPEED_10000. Therefore, this
patch makes the necessary correction.
Fixes: dd7f17c40f ("rtase: Implement ethtool function")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Different hardware requires different configurations, but this distinction
was not made previously. Additionally, the error message was not clear
enough. Therefore, this patch will address the issues mentioned above.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount
(skb->users) and iucv_sock_recvmsg() does not decrement skb refcount
at exit.
This results in skb memory leak in skb_queue_purge() and WARN_ON in
iucv_sock_destruct() during socket close. To fix this decrease
skb refcount by one if MSG_PEEK is set in order to prevent memory
leak and WARN_ON.
WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv]
CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv]
[<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv]
[<001587c704117a32>] __sk_destruct+0x52/0x550
[<001587c704104a54>] __sock_release+0xa4/0x230
[<001587c704104c0c>] sock_close+0x2c/0x40
[<001587c702c5f5a8>] __fput+0x2e8/0x970
[<001587c7024148c4>] task_work_run+0x1c4/0x2c0
[<001587c7023b0716>] do_exit+0x996/0x1050
[<001587c7023b13aa>] do_group_exit+0x13a/0x360
[<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60
[<001587c7022bccca>] do_syscall+0x27a/0x380
[<001587c7049a6a0c>] __do_syscall+0x9c/0x160
[<001587c7049ce8a8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv]
Fixes: eac3731bd0 ("[S390]: Add AF_IUCV socket support")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20241119152219.3712168-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In l2tp's net exit handler, we check that an IDR is empty before
destroying it:
WARN_ON_ONCE(!idr_is_empty(&pn->l2tp_tunnel_idr));
idr_destroy(&pn->l2tp_tunnel_idr);
By forcing memory allocation failures in idr_alloc_32, syzbot is able
to provoke a condition where idr_is_empty returns false despite there
being no items in the IDR. This turns out to be because the radix tree
of the IDR contains only internal radix-tree nodes and it is this that
causes idr_is_empty to return false. The internal nodes are cleaned by
idr_destroy.
Use idr_for_each to check that the IDR is empty instead of
idr_is_empty to avoid the problem.
Reported-by: syzbot+332fe1e67018625f63c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=332fe1e67018625f63c9
Fixes: 73d33bd063 ("l2tp: avoid using drain_workqueue in l2tp_pre_exit_net")
Signed-off-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20241118140411.1582555-1-jchapman@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test that extacks in dumps work. The test fills up the receive buffer
to test both the inline dump (as part of sendmsg()) and delayed one
(run during recvmsg()).
Use YNL helpers to parse the messages. We need to add the test to YNL
file to make sure the right include path are used.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241119224432.1713040-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under fixes extended extack reporting to dumps.
It works under normal conditions, because extack errors are
usually reported during ->start() or the first ->dump(),
it's quite rare that the dump starts okay but fails later.
If the dump does fail later, however, the input skb will
already have the initiating message pulled, so checking
if bad attr falls within skb->data will fail.
Switch the check to using nlh, which is always valid.
syzbot found a way to hit that scenario by filling up
the receive queue. In this case we initiate a dump
but don't call ->dump() until there is read space for
an skb.
WARNING: CPU: 1 PID: 5845 at net/netlink/af_netlink.c:2210 netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
RIP: 0010:netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
Call Trace:
<TASK>
netlink_dump_done+0x513/0x970 net/netlink/af_netlink.c:2250
netlink_dump+0x91f/0xe10 net/netlink/af_netlink.c:2351
netlink_recvmsg+0x6bb/0x11d0 net/netlink/af_netlink.c:1983
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x22f/0x280 net/socket.c:1073
__sys_recvfrom+0x246/0x3d0 net/socket.c:2267
__do_sys_recvfrom net/socket.c:2285 [inline]
__se_sys_recvfrom net/socket.c:2281 [inline]
__x64_sys_recvfrom+0xde/0x100 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff37dd17a79
Reported-by: syzbot+d4373fa8042c06cefa84@syzkaller.appspotmail.com
Fixes: 8af4f60472 ("netlink: support all extack types in dumps")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241119224432.1713040-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VCAP API unit tests fail randomly with errors such as
# vcap_api_iterator_init_test: EXPECTATION FAILED at drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:387
Expected 134 + 7 == iter.offset, but
134 + 7 == 141 (0x8d)
iter.offset == 17214 (0x433e)
# vcap_api_iterator_init_test: EXPECTATION FAILED at drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:388
Expected 5 == iter.reg_idx, but
iter.reg_idx == 702 (0x2be)
# vcap_api_iterator_init_test: EXPECTATION FAILED at drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:389
Expected 11 == iter.reg_bitpos, but
iter.reg_bitpos == 15 (0xf)
# vcap_api_iterator_init_test: pass:0 fail:1 skip:0 total:1
Comments in the code state that "A typegroup table ends with an all-zero
terminator". Add the missing terminators.
Some of the typegroups did have a terminator of ".offset = 0, .width = 0,
.value = 0,". Replace those terminators with "{ }" (no trailing ',') for
consistency and to excplicitly state "this is a terminator".
Fixes: 67d637516f ("net: microchip: sparx5: Adding KUNIT test for the VCAP API")
Cc: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241119213202.2884639-1-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware on Broadcom 1G chipsets have a known limitation
where they cannot handle DMA addresses that cross over 4GB.
When such an address is encountered, the hardware sets the
address overflow error bit in the DMA status register and
triggers a reset.
However, BCM57766 hardware is setting the overflow bit and
triggering a reset in some cases when there is no actual
underlying address overflow. The hardware team analyzed the
issue and concluded that it is happening when the status
block update has an address with higher (b16 to b31) bits
as 0xffff following a previous update that had lowest bits
as 0xffff.
To work around this bug in the BCM57766 hardware, set the
coherent dma mask from the current 64b to 31b. This will
ensure that upper bits of the status block DMA address are
always at most 0x7fff, thus avoiding the improper overflow
check described above. This work around is intended for only
status block and ring memories and has no effect on TX and
RX buffers as they do not require coherent memory.
Fixes: 72f2afb8a6 ("[TG3]: Add DMA address workaround")
Reported-by: Salam Noureddine <noureddine@arista.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20241119055741.147144-1-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found that rtnl_dump_ifinfo() could return with a lock held [1]
Move code around so that rtnl_link_ops_put() and put_net()
can be called at the end of this function.
[1]
WARNING: lock held when returning to user space!
6.12.0-rc7-syzkaller-01681-g38f83a57aa8e #0 Not tainted
syz-executor399/5841 is leaving the kernel with locks still held!
1 lock held by syz-executor399/5841:
#0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline]
#0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline]
#0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rtnl_link_ops_get+0x22/0x250 net/core/rtnetlink.c:555
Fixes: 43c7ce69d2 ("rtnetlink: Protect struct rtnl_link_ops with SRCU.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241121194105.3632507-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In lan78xx_probe(), the buffer `buf` was being freed twice: once
implicitly through `usb_free_urb(dev->urb_intr)` with the
`URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused
a double free issue.
To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to
simplify the initialization sequence and removed the redundant
`kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring
it is correctly managed by `usb_fill_int_urb()` and freed by
`usb_free_urb()` as intended.
Fixes: a6df95cae4 ("lan78xx: Fix memory allocation bug")
Cc: John Efstathiades <john.efstathiades@pebblebay.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241116130558.1352230-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up to 41ffcd9501 ("net: phy: fix phylib's dual
eee_enabled") and resolves an issue with genphy_c45_an_config_eee_aneg()
(called from genphy_c45_ethtool_set_eee) not seeing the new value of
phydev->eee_cfg.eee_enabled.
Fixes: 49168d1980 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
Pull bpf updates from Alexei Starovoitov:
- Add BPF uprobe session support (Jiri Olsa)
- Optimize uprobe performance (Andrii Nakryiko)
- Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman)
- Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao)
- Prevent tailcall infinite loop caused by freplace (Leon Hwang)
- Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi)
- Introduce uptr support in the task local storage map (Martin KaFai
Lau)
- Stringify errno log messages in libbpf (Mykyta Yatsenko)
- Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim)
- Support BPF objects of either endianness in libbpf (Tony Ambardar)
- Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai)
- Introduce private stack for eligible BPF programs (Yonghong Song)
- Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee)
- Migrate test_sock to selftests/bpf test_progs (Jordan Rife)
* tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits)
libbpf: Change hash_combine parameters from long to unsigned long
selftests/bpf: Fix build error with llvm 19
libbpf: Fix memory leak in bpf_program__attach_uprobe_multi
bpf: use common instruction history across all states
bpf: Add necessary migrate_disable to range_tree.
bpf: Do not alloc arena on unsupported arches
selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar
selftests/bpf: Add a test for arena range tree algorithm
bpf: Introduce range_tree data structure and use it in bpf arena
samples/bpf: Remove unused variable in xdp2skb_meta_kern.c
samples/bpf: Remove unused variables in tc_l2_redirect_kern.c
bpftool: Cast variable `var` to long long
bpf, x86: Propagate tailcall info only for subprogs
bpf: Add kernel symbol for struct_ops trampoline
bpf: Use function pointers count as struct_ops links count
bpf: Remove unused member rcu from bpf_struct_ops_map
selftests/bpf: Add struct_ops prog private stack tests
bpf: Support private stack for struct_ops progs
selftests/bpf: Add tracing prog private stack tests
bpf, x86: Support private stack in jit
...
Pull ARM SoC updates from Arnd Bergmann:
"The SoC specific code updates for 6.13 are fairly minimal.
One Broadcom SoC model gains automatic configuration for the debug
uarg as we have on many other machines, the remaining changes are
trivial cleanups"
* tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx: Switch to new sys-off handler API
ARM: bcm: brcmstb: Drop custom init_irq callback
ARM: bcm: Support BCMBCA debug UART
ARM: zynq: Remove unused zynq_slcr_init() declaration
ASoC: samsung: Remove obsoleted declaration for s3c64xx_ac97_setup_gpio
ARM: samsung: Remove obsoleted declaration for s3c_hwmon_set_platdata
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a few newly added device drivers get enabled in the arm32
multi_v7_defconfig and arm64 defconfig as well as a few of the SoC
specific config files.
The main visible change is the inclusion of (reduced) debug info by
default in the 32-bit defconfig"
* tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E
arm64: defconfig: Enable VBATTB clock and Renesas RTCA-3
arm64: defconfig: Enable PCF857X GPIO expander
arm64: defconfig: Enable sc7280 clock controllers
ARM: configs: at91: enable PAC1934 driver as module
ARM: multi_v7_defconfig: Enable debugging symbols by default
