Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
Pull Documentation updates from Jonathan Corbet:
- Quite a bit of Chinese and Spanish translation work
- Clarifying that Git commit IDs >12chars are OK
- A new nvme-multipath document
- A reorganization of the admin-guide top-level page to make it
readable
- Clarification of the role of Acked-by and maintainer discretion on
their acceptance
- Some reorganization of debugging-oriented docs
... and typo fixes, documentation updates, etc as usual
* tag 'docs-6.14' of git://git.lwn.net/linux: (50 commits)
Documentation: Fix x86_64 UEFI outdated references to elilo
Documentation/sysctl: Add timer_migration to kernel.rst
docs/mm: Physical memory: Remove zone_t
docs: submitting-patches: clarify that signers may use their discretion on tags
docs: submitting-patches: clarify difference between Acked-by and Reviewed-by
docs: submitting-patches: clarify Acked-by and introduce "# Suffix"
Documentation: bug-hunting.rst: remove odd contact information
docs/zh_CN: Add sak index Chinese translation
doc: module: DEFAULT_SYMBOL_NAMESPACE must be defined before #includes
doc: module: Fix documented type of namespace
Documentation/kernel-parameters: Fix a reference to vga-softcursor.rst
docs/zh_CN: Add landlock index Chinese translation
Documentation: Fix typo localmodonfig -> localmodconfig
overlayfs.rst: Fix and improve grammar
docs/zh_CN: Add siphash index Chinese translation
docs/zh_CN: Add security IMA-templates Chinese translation
docs/zh_CN: Add security digsig Chinese translation
Align git commit ID abbreviation guidelines and checks
docs: process: submitting-patches: split canonical patch format section
docs/zh_CN: Add security lsm Chinese translation
...
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
Pull scipts/sorttable updates from Steven Rostedt:
"The sorttable.c was a copy from recordmcount.c which is very hard to
maintain. That's because it uses macro helpers and places the code in
a header file sorttable.h to handle both the 64 bit and 32 bit version
of the Elf structures. It also uses _r()/r()/r2() wrappers around
accessing the data which will read the 64 bit or 32 bit version of the
data as well as handle endianess. If the wrong wrapper is used, an
invalid value will result, and this has been a cause for bugs in the
past. In fact the new ORC code doesn't even use it. That's fine
because ORC is only for 64 bit x86 which is the default parsing.
Instead of having a bunch of macros defined and then include the code
twice from a header, the Elf structures are each wrapped in a union.
The union holds the 64 bit and 32 bit version of the needed structure.
Then a structure of function pointers is used, along with helper
macros to access the ELF types appropriately for their byte size and
endianess. How to reference the data fields is moved from the code
that implements the sorting to the helper functions where all accesses
to a field will use he same helper function. As long as the helper
functions access the fields correctly, the code will also access the
fields. This is an improvement over having to code implementing the
sorting having to make sure it always uses the right accessor function
when reading an ELF field.
This is a clean up only, the functionality of the scripts/sorttable.c
does not change"
* tag 'trace-sorttable-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/sorttable: Use a structure of function pointers for elf helpers
scripts/sorttable: Get start/stop_mcount_loc from ELF file directly
scripts/sorttable: Move code from sorttable.h into sorttable.c
scripts/sorttable: Use uint64_t for mcount sorting
scripts/sorttable: Add helper functions for Elf_Sym
scripts/sorttable: Add helper functions for Elf_Shdr
scripts/sorttable: Add helper functions for Elf_Ehdr
scripts/sorttable: Convert Elf_Sym MACRO over to a union
scripts/sorttable: Replace Elf_Shdr Macro with a union
scripts/sorttable: Convert Elf_Ehdr to union
scripts/sorttable: Make compare_extable() into two functions
scripts/sorttable: Have the ORC code use the _r() functions to read
scripts/sorttable: Remove unneeded Elf_Rel
scripts/sorttable: Remove unused write functions
scripts/sorttable: Remove unused macro defines
Pull locking updates from Ingo Molnar:
"Lockdep:
- Improve and fix lockdep bitsize limits, clarify the Kconfig
documentation (Carlos Llamas)
- Fix lockdep build warning on Clang related to
chain_hlock_class_idx() inlining (Andy Shevchenko)
- Relax the requirements of PROVE_RAW_LOCK_NESTING arch support by
not tying it to ARCH_SUPPORTS_RT unnecessarily (Waiman Long)
Rust integration:
- Support lock pointers managed by the C side (Lyude Paul)
- Support guard types (Lyude Paul)
- Update MAINTAINERS file filters to include the Rust locking code
(Boqun Feng)
Wake-queues:
- Add raw_spin_*wake() helpers to simplify locking code (John Stultz)
SMP cross-calls:
- Fix potential data update race by evaluating the local cond_func()
before IPI side-effects (Mathieu Desnoyers)
Guard primitives:
- Ease [c]tags based searches by including the cleanup/guard type
primitives (Peter Zijlstra)
ww_mutexes:
- Simplify the ww_mutex self-test code via swap() (Thorsten Blum)
Static calls:
- Update the static calls MAINTAINERS file-pattern (Jiri Slaby)"
* tag 'locking-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add static_call_inline.c to STATIC BRANCH/CALL
cleanup, tags: Create tags for the cleanup primitives
sched/wake_q: Add helper to call wake_up_q after unlock with preemption disabled
rust: sync: Add lock::Backend::assert_is_held()
rust: sync: Add SpinLockGuard type alias
rust: sync: Add MutexGuard type alias
rust: sync: Make Guard::new() public
rust: sync: Add Lock::from_raw() for Lock<(), B>
locking: MAINTAINERS: Start watching Rust locking primitives
lockdep: Move lockdep_assert_locked() under #ifdef CONFIG_PROVE_LOCKING
lockdep: Mark chain_hlock_class_idx() with __maybe_unused
lockdep: Document MAX_LOCKDEP_CHAIN_HLOCKS calculation
lockdep: Clarify size for LOCKDEP_*_BITS configs
lockdep: Fix upper limit for LOCKDEP_*_BITS configs
locking/ww_mutex/test: Use swap() macro
smp/scf: Evaluate local cond_func() before IPI side-effects
locking/lockdep: Enforce PROVE_RAW_LOCK_NESTING only if ARCH_SUPPORTS_RT
Since commit bdf8eafbf7 ("arm64: stacktrace: report source of unwind
data") a stack trace line can contain an additional info field that was not
present before, in the form of one or more letters in parentheses. E.g.:
[ 504.517915] led_sysfs_enable+0x54/0x80 (P)
^^^
When this is present, decode_stacktrace decodes the line incorrectly:
[ 504.517915] led_sysfs_enable+0x54/0x80 P
Extend parsing to decode it correctly:
[ 504.517915] led_sysfs_enable (drivers/leds/led-core.c:455 (discriminator 7)) (P)
The regex to match such lines assumes the info can be extended in the
future to other uppercase characters, and will need to be extended in case
other characters will be used. Using a much more generic regex might incur
in false positives, so this looked like a good tradeoff.
Link: https://lkml.kernel.org/r/20241230-decode_stacktrace-fix-info-v1-1-984910659173@bootlin.com
Fixes: bdf8eafbf7 ("arm64: stacktrace: report source of unwind data")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Puranjay Mohan <puranjay@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg reported that it is hard to find the definition of things like:
__free(argv) without having to do 'git grep "DEFINE_FREE(argv,"'.
Add tag generation for the various macros in cleanup.h.
Notably 'DEFINE_FREE(argv, ...)' will now generate a 'cleanup_argv'
tag, while all the others, eg. 'DEFINE_GUARD(mutex, ...)' will
generate 'class_mutex' like tags.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250106102647.GB20870@noisy.programming.kicks-ass.net
Because the `macros` crate exposes procedural macros, it must be
compiled as a dynamic library (so it can be loaded by the compiler at
compile-time).
Before this change the resulting artifact was always named
`libmacros.so`, which works on hosts where this matches the naming
convention for dynamic libraries. However the proper name on macOS would
be `libmacros.dylib`.
This turns out to matter even when the dependency is passed with a path
(`--extern macros=path/to/libmacros.so` rather than `--extern macros`)
because rustc uses the file name to infer the type of the library (see
link). This is because there's no way to specify both the path to and
the type of the external library via CLI flags. The compiler could
speculatively parse the file to determine its type, but it does not do
so today.
This means that libraries that match neither rustc's naming convention
for static libraries nor the platform's naming convention for dynamic
libraries are *rejected*.
The only solution I've found is to follow the host platform's naming
convention. This patch does that by querying the compiler to determine
the appropriate name for the artifact. This allows the kernel to build
with CONFIG_RUST=y on macOS.
Link: https://github.com/rust-lang/rust/blob/d829780/compiler/rustc_metadata/src/locator.rs#L728-L752
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241216-b4-dylib-host-macos-v7-1-cfc507681447@gmail.com
[ Added `MAKEFLAGS=`s to avoid jobserver warnings. Removed space.
Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
