Clear reset status flag, to keep error status register clean after reset
(ad3552r manual, rev B table 38).
Reset error flag was left to 1, so debugging registers, the "Error
Status Register" was dirty (0x01). It is important to clear this bit, so
if there is any reset event over normal working mode, it is possible to
detect it.
Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250125-wip-bl-ad3552r-clear-reset-v2-1-aa3a27f3ff8c@baylibre.com
Cc: <Stable@vger..kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the driver was originally created, it was decided that
sampling_frequency and hysteresis would be shared_per_type instead
of shared_by_all (even though it is internally shared by all). Eg:
in_proximity_raw
in_proximity_sampling_frequency
When we introduced support for more channels, we continued with
shared_by_type which. Eg:
in_proximity0_raw
in_proximity1_raw
in_proximity_sampling_frequency
in_attention_raw
in_attention_sampling_frequency
Ideally we should change to shared_by_all, but it is not an option,
because the current naming has been a stablished ABI by now. Luckily we
can use separate instead. That will be more consistent:
in_proximity0_raw
in_proximity0_sampling_frequency
in_proximity1_raw
in_proximity1_sampling_frequency
in_attention_raw
in_attention_sampling_frequency
Fixes: 596ef5cf65 ("iio: hid-sensor-prox: Add support for more channels")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20241216-fix-hid-sensor-v2-1-ff8c1959ec4a@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The two provided max_scale_nano values must be multiplied by 100 and 10
respectively to achieve nano units. According to the comments:
Max scale for apds0306 is 16.326432 → the fractional part is 0.326432,
which is 326432000 in NANO. The current value is 3264320.
Max scale for apds0306-065 is 14.09721 → the fractional part is 0.09712,
which is 97120000 in NANO. The current value is 9712000.
Update max_scale_nano initialization to use the right NANO fractional
parts.
Cc: stable@vger.kernel.org
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Tested-by: subhajit.ghosh@tweaklogic.com
Link: https://patch.msgid.link/20250112-apds9306_nano_vals-v1-1-82fb145d0b16@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge from Jonathan:
IIO: 2nd set of fixes for the 6.13 cycle.
Given timing so late in cycle and that they are all confined to
specific drivers, it is fine for these to go upstream early in the
6.14 cycle.
hid-sensors
- Handle processed attention channel rather than just returning
an error.
adi,ad3552r
- Fix output ranges for ad3541r and ad3542r.
- Clear the reset status flag so that we can pick up any resets
during operation.
adi,ad5791
- Fix a misleading dt binding example where the sense of the
interrupt was reversed.
adi,ad7606
- Fix some hard coded offsets that should be taking the number of
channels on a particular part into account. These were missed
due to some racing changes.
ams,as73211
- Fix an off by one in optimized path for just reading the colour
channels.
bosch,bme680
- Fix type of variable passed as pointer, ensuring it works on
big endian systems and doesn't expose uninitialized data.
* tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
iio: light: as73211: fix channel handling in only-color triggered buffer
dt-bindings: iio: dac: ad5791: ldac gpio is active low
iio: hid-sensor-prox: Fix invalid read_raw for attention
iio: adc: ad7606: Fix hardcoded offset in the ADC channels
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix ad3541/2r voltage ranges to be as per ad3542r datasheet,
rev. C, table 38 (page 57).
The wrong ad354xr ranges was generating erroneous Vpp output.
In more details:
- fix wrong number of ranges, they are 5 ranges, not 6,
- remove non-existent 0-3V range,
- adjust order, since ad3552r_find_range() get a wrong index,
producing a wrong Vpp as output.
Retested all the ranges on real hardware, EVALAD3542RFMCZ:
adi,output-range-microvolt (fdt):
<(000000) (2500000)>; ok (Rfbx1, switch 10)
<(000000) (5000000)>; ok (Rfbx1, switch 10)
<(000000) (10000000)>; ok (Rfbx1, switch 10)
<(-5000000) (5000000)>; ok (Rfbx2, switch +/- 5)
<(-2500000) (7500000)>; ok (Rfbx2, switch -2.5/7.5)
Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250108-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v2-1-2dac02f04638@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull IIO updaate from Jonathan:
IIO: 1st set of new device support, features and cleanup for 6.14
Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.
There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:
struct {
s16 sample;
aligned_s64 timestamp;
} scan;
New device support
==================
adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
but with lower sampling rates and no configuration registers.
Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
compatible with fxls8962af but with different device IDs which are used in
presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
the counter functionality in this driver as that is handled by the
counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.
Driver drop
===========
rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
Matti had done all the work to get a driver upstream.
Features
========
adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
more platforms that don't obey prior (non general) assumptions on
how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
higher speeds.
- Add regmap cache to reduce access to device.
Cleanup and minor fixes
=======================
cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
Includes a few cleanups where this unsigned and it should have been
signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
and iio_read_channel_label() are page sized and page aligned.
Done this way because the callbacks are almost always only used
to fill sysfs attributes. The check covers the tiny percentage
of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
clearing the whole thing before writing rather than trying to
clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
account changes in gain and integration time.
Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.
* tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
iio: adc: ad7625: Add ending newlines to error messages
iio: accel: adxl345: complete the list of defines
iio: accel: adxl345: add FIFO with watermark events
iio: accel: adxl345: initialize FIFO delay value for SPI
iio: accel: adxl345: introduce interrupt handling
iio: light: veml3235: fix scale to conform to ABI
iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
iio: light: veml3235: extend regmap to add cache
iio: light: veml3235: fix code style
dt-bindings: iio: accel: adxl345: add interrupt-names
dt-bindings: iio: accel: adxl345: make interrupts not a required property
dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
iio: adc: meson: fix voltage reference selection field name typo
iio: adc: rockchip: correct alignment of timestamp
iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
...
During channel configuration, the iio-mux driver allocates a page with
devm_kzalloc(PAGE_SIZE) to read channel ext_info. However, the resulting
buffer points to an offset of the page due to the devres header sitting
at the beginning of the allocated area. This leads to failure in the
provider driver when sysfs_emit* helpers are used to format the ext_info
attributes.
Switch to plain kzalloc version. The devres version is not strictly
necessary as the buffer is only accessed during the channel
configuration phase. Rely on __free cleanup to deallocate the buffer.
Also, move the ext_info handling into a new function to have the page
buffer definition and assignment in one statement as suggested by
cleanup documentation.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Fixes: 7ba9df54b0 ("iio: multiplexer: new iio category and iio-mux driver")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241202-iio-kmalloc-align-v1-2-aa9568c03937@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a basic setup for FIFO with configurable watermark. Add a handler
for watermark interrupt events and extend the channel for the
scan_index needed for the iio channel. The sensor is configurable to use
a FIFO_BYPASSED mode or a FIFO_STREAM mode. For the FIFO_STREAM mode now
a watermark can be configured, or disabled by setting 0. Further features
require a working FIFO setup.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241228232949.72487-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current scale is not ABI-compliant as it is just the sensor gain
instead of the value that acts as a multiplier to be applied to the raw
value (there is no offset).
Use the iio-gts helpers to obtain the proper scale values according to
the gain and integration time to match the resolution tables from the
datasheet. When at it, use 'scale' instead of 'gain' consistently for
the get/set functions to avoid misunderstandings.
Fixes: c5a23f80c1 ("iio: light: add support for veml3235")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241230-veml3235_scale-v3-2-48a5795e2f64@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This helper functions reduce the burden in the drivers that want to
fetch a gain and time selector for a given scale or a new optimal gain.
The former is currently achieved by calling
iio_gts_find_gain_sel_for_scale_using_time() for the current time
selector, and then iterating over the rest of time selectors if the
gain selector was not found.
The latter requires a combination of multiple iio-gts helpers to find
the new gain, look for an optimal gain if there was no exact match, and
set a minimum gain if the optimal gain is not in the range of available
gains.
Provide simpler workflows by means of functions that address common
patterns in the users of the iio-gts helpers.
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241230-veml3235_scale-v3-1-48a5795e2f64@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
