treewide: Fix wrong singular form of jiffies in comments

There are several comments all over the place, which uses a wrong singular
form of jiffies.

Replace 'jiffie' by 'jiffy'. No functional change.

Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de

Documentation/admin-guide/media/vivid.rst

@@ -328,7 +328,7 @@ and an HDMI input, one input for each input type. Those are described in more
 detail below.
 
 Special attention has been given to the rate at which new frames become
-available. The jitter will be around 1 jiffie (that depends on the HZ
+available. The jitter will be around 1 jiffy (that depends on the HZ
 configuration of your kernel, so usually 1/100, 1/250 or 1/1000 of a second),
 but the long-term behavior is exactly following the framerate. So a
 framerate of 59.94 Hz is really different from 60 Hz. If the framerate

Documentation/timers/timers-howto.rst

@@ -19,7 +19,7 @@ it really need to delay in atomic context?" If so...
 
 ATOMIC CONTEXT:
 	You must use the `*delay` family of functions. These
-	functions use the jiffie estimation of clock speed
+	functions use the jiffy estimation of clock speed
 	and will busy wait for enough loop cycles to achieve
 	the desired delay:
 

Documentation/translations/sp_SP/scheduler/sched-design-CFS.rst

@@ -109,7 +109,7 @@ para que se ejecute, y la tarea en ejecución es interrumpida.
 ==================================
 
 CFS usa una granularidad de nanosegundos y no depende de ningún
-jiffie o detalles como HZ. De este modo, el gestor de tareas CFS no tiene
+jiffy o detalles como HZ. De este modo, el gestor de tareas CFS no tiene
 noción de "ventanas de tiempo" de la forma en que tenía el gestor de
 tareas previo, y tampoco tiene heurísticos. Únicamente hay un parámetro
 central ajustable (se ha de cambiar en CONFIG_SCHED_DEBUG):

arch/arm/mach-versatile/spc.c

@@ -73,7 +73,7 @@
 
 /*
  * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
- * operation, the operation could start just before jiffie is about
+ * operation, the operation could start just before jiffy is about
  * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
  */
 #define TIMEOUT_US	20000

arch/m68k/q40/q40ints.c

@@ -106,7 +106,7 @@ void __init q40_init_IRQ(void)
  * this stuff doesn't really belong here..
  */
 
-int ql_ticks;              /* 200Hz ticks since last jiffie */
+int ql_ticks;              /* 200Hz ticks since last jiffy */
 static int sound_ticks;
 
 #define SVOL 45

arch/x86/kernel/cpu/mce/dev-mcelog.c

@@ -314,7 +314,7 @@ static ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf,
 
 	/*
 	 * Need to give user space some time to set everything up,
-	 * so do it a jiffie or two later everywhere.
+	 * so do it a jiffy or two later everywhere.
 	 */
 	schedule_timeout(2);
 

drivers/char/ipmi/ipmi_ssif.c

@@ -980,7 +980,7 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 			ipmi_ssif_unlock_cond(ssif_info, flags);
 			start_get(ssif_info);
 		} else {
-			/* Wait a jiffie then request the next message */
+			/* Wait a jiffy then request the next message */
 			ssif_info->waiting_alert = true;
 			ssif_info->retries_left = SSIF_RECV_RETRIES;
 			if (!ssif_info->stopping)

drivers/dma-buf/st-dma-fence.c

@@ -402,7 +402,7 @@ static int test_wait_timeout(void *arg)
 
 	if (dma_fence_wait_timeout(wt.f, false, 2) == -ETIME) {
 		if (timer_pending(&wt.timer)) {
-			pr_notice("Timer did not fire within the jiffie!\n");
+			pr_notice("Timer did not fire within the jiffy!\n");
 			err = 0; /* not our fault! */
 		} else {
 			pr_err("Wait reported incomplete after timeout\n");

drivers/gpu/drm/i915/gem/i915_gem_wait.c

@@ -266,7 +266,7 @@ i915_gem_wait_ioctl(struct drm_device *dev, void *data, struct drm_file *file)
 		if (ret == -ETIME && !nsecs_to_jiffies(args->timeout_ns))
 			args->timeout_ns = 0;
 
-		/* Asked to wait beyond the jiffie/scheduler precision? */
+		/* Asked to wait beyond the jiffy/scheduler precision? */
 		if (ret == -ETIME && args->timeout_ns)
 			ret = -EAGAIN;
 	}

drivers/gpu/drm/i915/gt/selftest_execlists.c

@@ -93,7 +93,7 @@ static int wait_for_reset(struct intel_engine_cs *engine,
 		return -EINVAL;
 	}
 
-	/* Give the request a jiffie to complete after flushing the worker */
+	/* Give the request a jiffy to complete after flushing the worker */
 	if (i915_request_wait(rq, 0,
 			      max(0l, (long)(timeout - jiffies)) + 1) < 0) {
 		pr_err("%s: hanging request %llx:%lld did not complete\n",
@@ -3426,7 +3426,7 @@ static int live_preempt_timeout(void *arg)
 			cpu_relax();
 
 		saved_timeout = engine->props.preempt_timeout_ms;
-		engine->props.preempt_timeout_ms = 1; /* in ms, -> 1 jiffie */
+		engine->props.preempt_timeout_ms = 1; /* in ms, -> 1 jiffy */
 
 		i915_request_get(rq);
 		i915_request_add(rq);

drivers/gpu/drm/i915/i915_utils.c

@@ -110,7 +110,7 @@ void set_timer_ms(struct timer_list *t, unsigned long timeout)
 	 * Paranoia to make sure the compiler computes the timeout before
 	 * loading 'jiffies' as jiffies is volatile and may be updated in
 	 * the background by a timer tick. All to reduce the complexity
-	 * of the addition and reduce the risk of losing a jiffie.
+	 * of the addition and reduce the risk of losing a jiffy.
 	 */
 	barrier();
 

drivers/gpu/drm/v3d/v3d_bo.c

@@ -279,7 +279,7 @@ v3d_wait_bo_ioctl(struct drm_device *dev, void *data,
 	else
 		args->timeout_ns = 0;
 
-	/* Asked to wait beyond the jiffie/scheduler precision? */
+	/* Asked to wait beyond the jiffy/scheduler precision? */
 	if (ret == -ETIME && args->timeout_ns)
 		ret = -EAGAIN;
 

drivers/isdn/mISDN/dsp_cmx.c

@@ -82,7 +82,7 @@
  *  - has multiple clocks.
  *  - has no usable clock due to jitter or packet loss (VoIP).
  * In this case the system's clock is used. The clock resolution depends on
- * the jiffie resolution.
+ * the jiffy resolution.
  *
  * If a member joins a conference:
  *

drivers/net/ethernet/marvell/mvmdio.c

@@ -104,7 +104,7 @@ static int orion_mdio_wait_ready(const struct orion_mdio_ops *ops,
 			return 0;
 	} else {
 		/* wait_event_timeout does not guarantee a delay of at
-		 * least one whole jiffie, so timeout must be no less
+		 * least one whole jiffy, so timeout must be no less
 		 * than two.
 		 */
 		timeout = max(usecs_to_jiffies(MVMDIO_SMI_TIMEOUT), 2);

fs/xfs/xfs_buf.h

@@ -210,7 +210,7 @@ struct xfs_buf {
 	 * success the write is considered to be failed permanently and the
 	 * iodone handler will take appropriate action.
 	 *
-	 * For retry timeouts, we record the jiffie of the first failure. This
+	 * For retry timeouts, we record the jiffy of the first failure. This
 	 * means that we can change the retry timeout for buffers already under
 	 * I/O and thus avoid getting stuck in a retry loop with a long timeout.
 	 *

include/linux/jiffies.h

@@ -418,7 +418,7 @@ extern unsigned long preset_lpj;
 #define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
                                         TICK_NSEC -1) / (u64)TICK_NSEC))
 /*
- * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
+ * The maximum jiffy value is (MAX_INT >> 1).  Here we translate that
  * into seconds.  The 64-bit case will overflow if we are not careful,
  * so use the messy SH_DIV macro to do it.  Still all constants.
  */

include/linux/timekeeper_internal.h

@@ -73,7 +73,7 @@ struct tk_read_base {
  * @overflow_seen:	Overflow warning flag (DEBUG_TIMEKEEPING)
  *
  * Note: For timespec(64) based interfaces wall_to_monotonic is what
- * we need to add to xtime (or xtime corrected for sub jiffie times)
+ * we need to add to xtime (or xtime corrected for sub jiffy times)
  * to get to monotonic time.  Monotonic is pegged at zero at system
  * boot time, so wall_to_monotonic will be negative, however, we will
  * ALWAYS keep the tv_nsec part positive so we can use the usual

kernel/time/alarmtimer.c

@@ -493,7 +493,7 @@ static u64 __alarm_forward_now(struct alarm *alarm, ktime_t interval, bool throt
 		 * promised in the context of posix_timer_fn() never
 		 * materialized, but someone should really work on it.
 		 *
-		 * To prevent DOS fake @now to be 1 jiffie out which keeps
+		 * To prevent DOS fake @now to be 1 jiffy out which keeps
 		 * the overrun accounting correct but creates an
 		 * inconsistency vs. timer_gettime(2).
 		 */

kernel/time/clockevents.c

@@ -190,7 +190,7 @@ int clockevents_tick_resume(struct clock_event_device *dev)
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST
 
-/* Limit min_delta to a jiffie */
+/* Limit min_delta to a jiffy */
 #define MIN_DELTA_LIMIT		(NSEC_PER_SEC / HZ)
 
 /**

kernel/time/hrtimer.c

@@ -1177,7 +1177,7 @@ static inline ktime_t hrtimer_update_lowres(struct hrtimer *timer, ktime_t tim,
 	/*
 	 * CONFIG_TIME_LOW_RES indicates that the system has no way to return
 	 * granular time values. For relative timers we add hrtimer_resolution
-	 * (i.e. one jiffie) to prevent short timeouts.
+	 * (i.e. one jiffy) to prevent short timeouts.
 	 */
 	timer->is_rel = mode & HRTIMER_MODE_REL;
 	if (timer->is_rel)