Merge branch 'master' into upstream

Conflicts:

	drivers/net/netxen/netxen_nic.h
	drivers/net/netxen/netxen_nic_main.c

Documentation/DocBook/Makefile

@@ -190,9 +190,13 @@ quiet_cmd_fig2png = FIG2PNG $@
 ###
 # Help targets as used by the top-level makefile
 dochelp:
-	@echo  '  Linux kernel internal documentation in different formats:'
-	@echo  '  xmldocs (XML DocBook), psdocs (Postscript), pdfdocs (PDF)'
-	@echo  '  htmldocs (HTML), mandocs (man pages, use installmandocs to install)'
+	@echo  ' Linux kernel internal documentation in different formats:'
+	@echo  '  htmldocs        - HTML'
+	@echo  '  installmandocs  - install man pages generated by mandocs'
+	@echo  '  mandocs         - man pages'
+	@echo  '  pdfdocs         - PDF'
+	@echo  '  psdocs          - Postscript'
+	@echo  '  xmldocs         - XML DocBook'
 
 ###
 # Temporary files left by various tools

Documentation/kernel-parameters.txt

@@ -1416,6 +1416,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	scsi_logging=	[SCSI]
 
+	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
+			discovered.  async scans them in kernel threads,
+			allowing boot to proceed.  none ignores them, expecting
+			user space to do the scan.
+
 	selinux		[SELINUX] Disable or enable SELinux at boot time.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.

Documentation/powerpc/booting-without-of.txt

@@ -6,6 +6,8 @@
     IBM Corp.
 (c) 2005 Becky Bruce <becky.bruce at freescale.com>,
     Freescale Semiconductor, FSL SOC and 32-bit additions
+(c) 2006 MontaVista Software, Inc.
+    Flash chip node definition
 
    May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet.
 
@@ -1693,6 +1695,43 @@ platforms are moved over to use the flattened-device-tree model.
 		};
 	};
 
+    g) Flash chip nodes
+
+    Flash chips (Memory Technology Devices) are often used for solid state
+    file systems on embedded devices.
+
+    Required properties:
+
+     - device_type : has to be "rom"
+     - compatible : Should specify what this ROM device is compatible with
+       (i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
+       (which corresponds to the MTD physmap mapping driver).
+     - regs : Offset and length of the register set (or memory mapping) for
+       the device.
+
+    Recommended properties :
+
+     - bank-width : Width of the flash data bus in bytes. Required
+       for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
+     - partitions : Several pairs of 32-bit values where the first value is
+       partition's offset from the start of the device and the second one is
+       partition size in bytes with LSB used to signify a read only
+       partititon (so, the parition size should always be an even number).
+     - partition-names : The list of concatenated zero terminated strings
+       representing the partition names.
+
+   Example:
+
+ 	flash@ff000000 {
+ 		device_type = "rom";
+ 		compatible = "direct-mapped";
+ 		regs = <ff000000 01000000>;
+ 		bank-width = <4>;
+ 		partitions = <00000000 00f80000
+ 			      00f80000 00080001>;
+ 		partition-names = "fs\0firmware";
+ 	};
+
    More devices will be defined as this spec matures.
 
 

Documentation/powerpc/mpc52xx-device-tree-bindings.txt

@@ -0,0 +1,189 @@
+MPC52xx Device Tree Bindings
+----------------------------
+
+(c) 2006 Secret Lab Technologies Ltd
+Grant Likely <grant.likely at secretlab.ca>
+
+I - Introduction
+================
+Boards supported by the arch/powerpc architecture require device tree be
+passed by the boot loader to the kernel at boot time.  The device tree
+describes what devices are present on the board and how they are
+connected.  The device tree can either be passed as a binary blob (as
+described in Documentation/powerpc/booting-without-of.txt), or passed
+by Open Firmare (IEEE 1275) compatible firmware using an OF compatible
+client interface API.
+
+This document specifies the requirements on the device-tree for mpc52xx
+based boards.  These requirements are above and beyond the details
+specified in either the OpenFirmware spec or booting-without-of.txt
+
+All new mpc52xx-based boards are expected to match this document.  In
+cases where this document is not sufficient to support a new board port,
+this document should be updated as part of adding the new board support.
+
+II - Philosophy
+===============
+The core of this document is naming convention.  The whole point of
+defining this convention is to reduce or eliminate the number of
+special cases required to support a 52xx board.  If all 52xx boards
+follow the same convention, then generic 52xx support code will work
+rather than coding special cases for each new board.
+
+This section tries to capture the thought process behind why the naming
+convention is what it is.
+
+1. Node names
+-------------
+There is strong convention/requirements already established for children
+of the root node.  'cpus' describes the processor cores, 'memory'
+describes memory, and 'chosen' provides boot configuration.  Other nodes
+are added to describe devices attached to the processor local bus.
+Following convention already established with other system-on-chip
+processors, MPC52xx boards must have an 'soc5200' node as a child of the
+root node.
+
+The soc5200 node holds child nodes for all on chip devices.  Child nodes
+are typically named after the configured function.  ie. the FEC node is
+named 'ethernet', and a PSC in uart mode is named 'serial'.
+
+2. device_type property
+-----------------------
+similar to the node name convention above; the device_type reflects the
+configured function of a device.  ie. 'serial' for a uart and 'spi' for
+an spi controller.  However, while node names *should* reflect the
+configured function, device_type *must* match the configured function
+exactly.
+
+3. compatible property
+----------------------
+Since device_type isn't enough to match devices to drivers, there also
+needs to be a naming convention for the compatible property.  Compatible
+is an list of device descriptions sorted from specific to generic.  For
+the mpc52xx, the required format for each compatible value is
+<chip>-<device>[-<mode>].  At the minimum, the list shall contain two
+items; the first specifying the exact chip, and the second specifying
+mpc52xx for the chip.
+
+ie. ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc52xx-ethernet"
+
+The idea here is that most drivers will match to the most generic field
+in the compatible list (mpc52xx-*), but can also test the more specific
+field for enabling bug fixes or extra features.
+
+Modal devices, like PSCs, also append the configured function to the
+end of the compatible field.  ie. A PSC in i2s mode would specify
+"mpc52xx-psc-i2s", not "mpc52xx-i2s".  This convention is chosen to
+avoid naming conflicts with non-psc devices providing the same
+function.  For example, "mpc52xx-spi" and "mpc52xx-psc-spi" describe
+the mpc5200 simple spi device and a PSC spi mode respectively.
+
+If the soc device is more generic and present on other SOCs, the
+compatible property can specify the more generic device type also.
+
+ie. mscan: compatible = "mpc5200-mscan\0mpc52xx-mscan\0fsl,mscan";
+
+At the time of writing, exact chip may be either 'mpc5200' or
+'mpc5200b'.
+
+Device drivers should always try to match as generically as possible.
+
+III - Structure
+===============
+The device tree for an mpc52xx board follows the structure defined in
+booting-without-of.txt with the following additional notes:
+
+0) the root node
+----------------
+Typical root description node; see booting-without-of
+
+1) The cpus node
+----------------
+The cpus node follows the basic layout described in booting-without-of.
+The bus-frequency property holds the XLB bus frequency
+The clock-frequency property holds the core frequency
+
+2) The memory node
+------------------
+Typical memory description node; see booting-without-of.
+
+3) The soc5200 node
+-------------------
+This node describes the on chip SOC peripherals.  Every mpc52xx based
+board will have this node, and as such there is a common naming
+convention for SOC devices.
+
+Required properties:
+name			type		description
+----			----		-----------
+device_type		string		must be "soc"
+ranges			int		should be <0 baseaddr baseaddr+10000>
+reg			int		must be <baseaddr 10000>
+
+Recommended properties:
+name			type		description
+----			----		-----------
+compatible		string		should be "<chip>-soc\0mpc52xx-soc"
+					ie. "mpc5200b-soc\0mpc52xx-soc"
+#interrupt-cells	int		must be <3>.  If it is not defined
+					here then it must be defined in every
+					soc device node.
+bus-frequency		int		IPB bus frequency in HZ.  Clock rate
+					used by most of the soc devices.
+					Defining it here avoids needing it
+					added to every device node.
+
+4) soc5200 child nodes
+----------------------
+Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+
+Note: in the tables below, '*' matches all <chip> values.  ie.
+*-pic would translate to "mpc5200-pic\0mpc52xx-pic"
+
+Required soc5200 child nodes:
+name		device_type		compatible	Description
+----		-----------		----------	-----------
+cdm@<addr>	cdm			*-cmd		Clock Distribution
+pic@<addr>	interrupt-controller	*-pic		need an interrupt
+							controller to boot
+bestcomm@<addr>	dma-controller		*-bestcomm	52xx pic also requires
+							the bestcomm device
+
+Recommended soc5200 child nodes; populate as needed for your board
+name		device_type	compatible	Description
+----		-----------	----------	-----------
+gpt@<addr>	gpt		*-gpt		General purpose timers
+rtc@<addr>	rtc		*-rtc		Real time clock
+mscan@<addr>	mscan		*-mscan		CAN bus controller
+pci@<addr>	pci		*-pci		PCI bridge
+serial@<addr>	serial		*-psc-uart	PSC in serial mode
+i2s@<addr>	i2s		*-psc-i2s	PSC in i2s mode
+ac97@<addr>	ac97		*-psc-ac97	PSC in ac97 mode
+spi@<addr>	spi		*-psc-spi	PSC in spi mode
+irda@<addr>	irda		*-psc-irda	PSC in IrDA mode
+spi@<addr>	spi		*-spi		MPC52xx spi device
+ethernet@<addr>	network		*-fec		MPC52xx ethernet device
+ata@<addr>	ata		*-ata		IDE ATA interface
+i2c@<addr>	i2c		*-i2c		I2C controller
+usb@<addr>	usb-ohci-be	*-ohci,ohci-be	USB controller
+xlb@<addr>	xlb		*-xlb		XLB arbritrator
+
+IV - Extra Notes
+================
+
+1. Interrupt mapping
+--------------------
+The mpc52xx pic driver splits hardware IRQ numbers into two levels.  The
+split reflects the layout of the PIC hardware itself, which groups
+interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
+Bestcomm dma engine has it's own set of interrupt sources which are
+cascaded off of peripheral interrupt 0, which the driver interprets as a
+fourth group, SDMA.
+
+The interrupts property for device nodes using the mpc52xx pic consists
+of three cells; <L1 L2 level>
+
+    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+    L2 := interrupt number; directly mapped from the value in the
+          "ICTL PerStat, MainStat, CritStat Encoded Register"
+    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]

Documentation/scsi/scsi_mid_low_api.txt

@@ -375,7 +375,6 @@ Summary:
    scsi_add_device - creates new scsi device (lu) instance
    scsi_add_host - perform sysfs registration and set up transport class
    scsi_adjust_queue_depth - change the queue depth on a SCSI device
-   scsi_assign_lock - replace default host_lock with given lock
    scsi_bios_ptable - return copy of block device's partition table
    scsi_block_requests - prevent further commands being queued to given host
    scsi_deactivate_tcq - turn off tag command queueing
@@ -488,20 +487,6 @@ void scsi_adjust_queue_depth(struct scsi_device * sdev, int tagged,
                              int tags)
 
 
-/**
- * scsi_assign_lock - replace default host_lock with given lock
- * @shost: a pointer to a scsi host instance
- * @lock: pointer to lock to replace host_lock for this host
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Defined in: include/scsi/scsi_host.h .
- **/
-void scsi_assign_lock(struct Scsi_Host *shost, spinlock_t *lock)
-
-
 /**
  * scsi_bios_ptable - return copy of block device's partition table
  * @dev:        pointer to block device
@@ -1366,17 +1351,11 @@ Locks
 Each struct Scsi_Host instance has a spin_lock called struct 
 Scsi_Host::default_lock which is initialized in scsi_host_alloc() [found in 
 hosts.c]. Within the same function the struct Scsi_Host::host_lock pointer
-is initialized to point at default_lock with the scsi_assign_lock() function.
-Thereafter lock and unlock operations performed by the mid level use the
-struct Scsi_Host::host_lock pointer.
+is initialized to point at default_lock.  Thereafter lock and unlock
+operations performed by the mid level use the struct Scsi_Host::host_lock
+pointer.  Previously drivers could override the host_lock pointer but
+this is not allowed anymore.
 
-LLDs can override the use of struct Scsi_Host::default_lock by
-using scsi_assign_lock(). The earliest opportunity to do this would
-be in the detect() function after it has invoked scsi_register(). It
-could be replaced by a coarser grain lock (e.g. per driver) or a
-lock of equal granularity (i.e. per host). Using finer grain locks 
-(e.g. per SCSI device) may be possible by juggling locks in
-queuecommand().
 
 Autosense
 =========

MAINTAINERS

@@ -2438,6 +2438,13 @@ M:	promise@pnd-pc.demon.co.uk
 W:	http://www.pnd-pc.demon.co.uk/promise/
 S:	Maintained
 
+PS3 PLATFORM SUPPORT
+P:	Geoff Levand
+M:	geoffrey.levand@am.sony.com
+L:	linuxppc-dev@ozlabs.org
+L:	cbe-oss-dev@ozlabs.org
+S:	Supported
+
 PVRUSB2 VIDEO4LINUX DRIVER
 P:	Mike Isely
 M:	isely@pobox.com

README

@@ -1,4 +1,4 @@
-	Linux kernel release 2.6.xx <http://kernel.org>
+	Linux kernel release 2.6.xx <http://kernel.org/>
 
 These are the release notes for Linux version 2.6.  Read them carefully,
 as they tell you what this is all about, explain how to install the
@@ -22,15 +22,17 @@ ON WHAT HARDWARE DOES IT RUN?
 
   Although originally developed first for 32-bit x86-based PCs (386 or higher),
   today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
-  UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH,
+  UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
   IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS,
-  and Renesas M32R architectures.
+  Cris, Xtensa, AVR32 and Renesas M32R architectures.
 
   Linux is easily portable to most general-purpose 32- or 64-bit architectures
   as long as they have a paged memory management unit (PMMU) and a port of the
   GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
   also been ported to a number of architectures without a PMMU, although
   functionality is then obviously somewhat limited.
+  Linux has also been ported to itself. You can now run the kernel as a
+  userspace application - this is called UserMode Linux (UML).
 
 DOCUMENTATION:
 
@@ -113,6 +115,7 @@ INSTALLING the kernel:
    version 2.6.12.2 and want to jump to 2.6.12.3, you must first
    reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
    the 2.6.12.3 patch.
+   You can read more on this in Documentation/applying-patches.txt
 
  - Make sure you have no stale .o files and dependencies lying around:
 
@@ -161,6 +164,7 @@ CONFIGURING the kernel:
    only ask you for the answers to new questions.
 
  - Alternate configuration commands are:
+	"make config"      Plain text interface.
 	"make menuconfig"  Text based color menus, radiolists & dialogs.
 	"make xconfig"     X windows (Qt) based configuration tool.
 	"make gconfig"     X windows (Gtk) based configuration tool.
@@ -303,8 +307,9 @@ IF SOMETHING GOES WRONG:
 
  - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
    as is, otherwise you will have to use the "ksymoops" program to make
-   sense of the dump.  This utility can be downloaded from
-   ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops.
+   sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
+   This utility can be downloaded from
+   ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ .
    Alternately you can do the dump lookup by hand:
 
  - In debugging dumps like the above, it helps enormously if you can
@@ -336,7 +341,7 @@ IF SOMETHING GOES WRONG:
 
    If you for some reason cannot do the above (you have a pre-compiled
    kernel image or similar), telling me as much about your setup as
-   possible will help. 
+   possible will help.  Please read the REPORTING-BUGS document for details.
 
  - Alternately, you can use gdb on a running kernel. (read-only; i.e. you
    cannot change values or set break points.) To do this, first compile the

arch/arm/common/sharpsl_pm.c

@@ -60,16 +60,16 @@ static int sharpsl_ac_check(void);
 static int sharpsl_fatal_check(void);
 static int sharpsl_average_value(int ad);
 static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(void *private_);
-static void sharpsl_battery_thread(void *private_);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
 
 
 /*
  * Variables
  */
 struct sharpsl_pm_status sharpsl_pm;
-DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
-DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
 DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 
 
@@ -116,7 +116,7 @@ void sharpsl_battery_kick(void)
 EXPORT_SYMBOL(sharpsl_battery_kick);
 
 
-static void sharpsl_battery_thread(void *private_)
+static void sharpsl_battery_thread(struct work_struct *private_)
 {
 	int voltage, percent, apm_status, i = 0;
 
@@ -128,7 +128,7 @@ static void sharpsl_battery_thread(void *private_)
 	/* Corgi cannot confirm when battery fully charged so periodically kick! */
 	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
 			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_work(&toggle_charger);
+		schedule_delayed_work(&toggle_charger, 0);
 
 	while(1) {
 		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
@@ -212,7 +212,7 @@ static void sharpsl_charge_off(void)
 	sharpsl_pm_led(SHARPSL_LED_OFF);
 	sharpsl_pm.charge_mode = CHRG_OFF;
 
-	schedule_work(&sharpsl_bat);
+	schedule_delayed_work(&sharpsl_bat, 0);
 }
 
 static void sharpsl_charge_error(void)
@@ -222,7 +222,7 @@ static void sharpsl_charge_error(void)
 	sharpsl_pm.charge_mode = CHRG_ERROR;
 }
 
-static void sharpsl_charge_toggle(void *private_)
+static void sharpsl_charge_toggle(struct work_struct *private_)
 {
 	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
 
@@ -254,7 +254,7 @@ static void sharpsl_ac_timer(unsigned long data)
 	else if (sharpsl_pm.charge_mode == CHRG_ON)
 		sharpsl_charge_off();
 
-	schedule_work(&sharpsl_bat);
+	schedule_delayed_work(&sharpsl_bat, 0);
 }
 
 
@@ -279,10 +279,10 @@ static void sharpsl_chrg_full_timer(unsigned long data)
 			sharpsl_charge_off();
 	} else if (sharpsl_pm.full_count < 2) {
 		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_work(&toggle_charger);
+		schedule_delayed_work(&toggle_charger, 0);
 	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
 		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_work(&toggle_charger);
+		schedule_delayed_work(&toggle_charger, 0);
 	} else {
 		sharpsl_charge_off();
 		sharpsl_pm.charge_mode = CHRG_DONE;

arch/arm/mach-omap1/board-h3.c

@@ -323,7 +323,8 @@ static int h3_transceiver_mode(struct device *dev, int mode)
 
 	cancel_delayed_work(&irda_config->gpio_expa);
 	PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
-	schedule_work(&irda_config->gpio_expa);
+#error this is not permitted - mode is an argument variable
+	schedule_delayed_work(&irda_config->gpio_expa, 0);
 
 	return 0;
 }

arch/arm/mach-omap1/board-nokia770.c

@@ -74,7 +74,7 @@ static struct omap_kp_platform_data nokia770_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
 	.keymap		= nokia770_keymap,
-	.keymapsize	= ARRAY_SIZE(nokia770_keymap)
+	.keymapsize	= ARRAY_SIZE(nokia770_keymap),
 	.delay		= 4,
 };
 
@@ -191,7 +191,7 @@ static void nokia770_audio_pwr_up(void)
 		printk("HP connected\n");
 }
 
-static void codec_delayed_power_down(void *arg)
+static void codec_delayed_power_down(struct work_struct *work)
 {
 	down(&audio_pwr_sem);
 	if (audio_pwr_state == -1)
@@ -200,7 +200,7 @@ static void codec_delayed_power_down(void *arg)
 	up(&audio_pwr_sem);
 }
 
-static DECLARE_WORK(codec_power_down_work, codec_delayed_power_down, NULL);
+static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
 
 static void nokia770_audio_pwr_down(void)
 {

arch/arm/mach-omap1/leds-osk.c

@@ -35,7 +35,7 @@ static u8 hw_led_state;
 
 static u8 tps_leds_change;
 
-static void tps_work(void *unused)
+static void tps_work(struct work_struct *unused)
 {
 	for (;;) {
 		u8	leds;
@@ -61,7 +61,7 @@ static void tps_work(void *unused)
 	}
 }
 
-static DECLARE_WORK(work, tps_work, NULL);
+static DECLARE_WORK(work, tps_work);
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 

arch/arm/mach-omap2/board-h4.c

@@ -206,7 +206,8 @@ static int h4_transceiver_mode(struct device *dev, int mode)
 
 	cancel_delayed_work(&irda_config->gpio_expa);
 	PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
-	schedule_work(&irda_config->gpio_expa);
+#error this is not permitted - mode is an argument variable
+	schedule_delayed_work(&irda_config->gpio_expa, 0);
 
 	return 0;
 }

arch/arm/mach-pxa/akita-ioexp.c

@@ -36,11 +36,11 @@ I2C_CLIENT_INSMOD;
 
 static int max7310_write(struct i2c_client *client, int address, int data);
 static struct i2c_client max7310_template;
-static void akita_ioexp_work(void *private_);
+static void akita_ioexp_work(struct work_struct *private_);
 
 static struct device *akita_ioexp_device;
 static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
-DECLARE_WORK(akita_ioexp, akita_ioexp_work, NULL);
+DECLARE_WORK(akita_ioexp, akita_ioexp_work);
 
 
 /*
@@ -158,7 +158,7 @@ void akita_reset_ioexp(struct device *dev, unsigned char bit)
 EXPORT_SYMBOL(akita_set_ioexp);
 EXPORT_SYMBOL(akita_reset_ioexp);
 
-static void akita_ioexp_work(void *private_)
+static void akita_ioexp_work(struct work_struct *private_)
 {
 	if (akita_ioexp_device)
 		max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);

arch/i386/kernel/cpu/mcheck/non-fatal.c

@@ -51,10 +51,10 @@ static void mce_checkregs (void *info)
 	}
 }
 
-static void mce_work_fn(void *data);
-static DECLARE_WORK(mce_work, mce_work_fn, NULL);
+static void mce_work_fn(struct work_struct *work);
+static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
 
-static void mce_work_fn(void *data)
+static void mce_work_fn(struct work_struct *work)
 { 
 	on_each_cpu(mce_checkregs, NULL, 1, 1);
 	schedule_delayed_work(&mce_work, MCE_RATE);

arch/i386/kernel/smpboot.c

@@ -1049,13 +1049,15 @@ void cpu_exit_clear(void)
 
 struct warm_boot_cpu_info {
 	struct completion *complete;
+	struct work_struct task;
 	int apicid;
 	int cpu;
 };
 
-static void __cpuinit do_warm_boot_cpu(void *p)
+static void __cpuinit do_warm_boot_cpu(struct work_struct *work)
 {
-	struct warm_boot_cpu_info *info = p;
+	struct warm_boot_cpu_info *info =
+		container_of(work, struct warm_boot_cpu_info, task);
 	do_boot_cpu(info->apicid, info->cpu);
 	complete(info->complete);
 }
@@ -1064,7 +1066,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 	struct warm_boot_cpu_info info;
-	struct work_struct task;
 	int	apicid, ret;
 	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
 
@@ -1089,7 +1090,7 @@ static int __cpuinit __smp_prepare_cpu(int cpu)
 	info.complete = &done;
 	info.apicid = apicid;
 	info.cpu = cpu;
-	INIT_WORK(&task, do_warm_boot_cpu, &info);
+	INIT_WORK(&info.task, do_warm_boot_cpu);
 
 	tsc_sync_disabled = 1;
 
@@ -1097,7 +1098,7 @@ static int __cpuinit __smp_prepare_cpu(int cpu)
 	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
 			KERNEL_PGD_PTRS);
 	flush_tlb_all();
-	schedule_work(&task);
+	schedule_work(&info.task);
 	wait_for_completion(&done);
 
 	tsc_sync_disabled = 0;

arch/i386/kernel/tsc.c

@@ -217,7 +217,7 @@ static unsigned int cpufreq_delayed_issched = 0;
 static unsigned int cpufreq_init = 0;
 static struct work_struct cpufreq_delayed_get_work;
 
-static void handle_cpufreq_delayed_get(void *v)
+static void handle_cpufreq_delayed_get(struct work_struct *work)
 {
 	unsigned int cpu;
 
@@ -306,7 +306,7 @@ static int __init cpufreq_tsc(void)
 {
 	int ret;
 
-	INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
+	INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get);
 	ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
 					CPUFREQ_TRANSITION_NOTIFIER);
 	if (!ret)

arch/ia64/hp/sim/simserial.c

@@ -209,7 +209,7 @@ static void do_serial_bh(void)
 }
 #endif
 
-static void do_softint(void *private_)
+static void do_softint(struct work_struct *private_)
 {
 	printk(KERN_ERR "simserial: do_softint called\n");
 }
@@ -698,7 +698,7 @@ static int get_async_struct(int line, struct async_struct **ret_info)
 	info->flags = sstate->flags;
 	info->xmit_fifo_size = sstate->xmit_fifo_size;
 	info->line = line;
-	INIT_WORK(&info->work, do_softint, info);
+	INIT_WORK(&info->work, do_softint);
 	info->state = sstate;
 	if (sstate->info) {
 		kfree(info);

arch/ia64/kernel/mca.c

@@ -678,7 +678,7 @@ ia64_mca_cmc_vector_enable (void *dummy)
  * disable the cmc interrupt vector.
  */
 static void
-ia64_mca_cmc_vector_disable_keventd(void *unused)
+ia64_mca_cmc_vector_disable_keventd(struct work_struct *unused)
 {
 	on_each_cpu(ia64_mca_cmc_vector_disable, NULL, 1, 0);
 }
@@ -690,7 +690,7 @@ ia64_mca_cmc_vector_disable_keventd(void *unused)
  * enable the cmc interrupt vector.
  */
 static void
-ia64_mca_cmc_vector_enable_keventd(void *unused)
+ia64_mca_cmc_vector_enable_keventd(struct work_struct *unused)
 {
 	on_each_cpu(ia64_mca_cmc_vector_enable, NULL, 1, 0);
 }
@@ -1247,8 +1247,8 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	monarch_cpu = -1;
 }
 
-static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd, NULL);
-static DECLARE_WORK(cmc_enable_work, ia64_mca_cmc_vector_enable_keventd, NULL);
+static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd);
+static DECLARE_WORK(cmc_enable_work, ia64_mca_cmc_vector_enable_keventd);
 
 /*
  * ia64_mca_cmc_int_handler

arch/ia64/kernel/smpboot.c

@@ -463,15 +463,17 @@ struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
 }
 
 struct create_idle {
+	struct work_struct work;
 	struct task_struct *idle;
 	struct completion done;
 	int cpu;
 };
 
 void
-do_fork_idle(void *_c_idle)
+do_fork_idle(struct work_struct *work)
 {
-	struct create_idle *c_idle = _c_idle;
+	struct create_idle *c_idle =
+		container_of(work, struct create_idle, work);
 
 	c_idle->idle = fork_idle(c_idle->cpu);
 	complete(&c_idle->done);
@@ -482,10 +484,10 @@ do_boot_cpu (int sapicid, int cpu)
 {
 	int timeout;
 	struct create_idle c_idle = {
+		.work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
 		.cpu	= cpu,
 		.done	= COMPLETION_INITIALIZER(c_idle.done),
 	};
-	DECLARE_WORK(work, do_fork_idle, &c_idle);
 
  	c_idle.idle = get_idle_for_cpu(cpu);
  	if (c_idle.idle) {
@@ -497,9 +499,9 @@ do_boot_cpu (int sapicid, int cpu)
 	 * We can't use kernel_thread since we must avoid to reschedule the child.
 	 */
 	if (!keventd_up() || current_is_keventd())
-		work.func(work.data);
+		c_idle.work.func(&c_idle.work);
 	else {
-		schedule_work(&work);
+		schedule_work(&c_idle.work);
 		wait_for_completion(&c_idle.done);
 	}
 

arch/ia64/pci/pci.c

@@ -564,8 +564,8 @@ pcibios_enable_device (struct pci_dev *dev, int mask)
 void
 pcibios_disable_device (struct pci_dev *dev)
 {
-	if (dev->is_enabled)
-		acpi_pci_irq_disable(dev);
+	BUG_ON(atomic_read(&dev->enable_cnt));
+	acpi_pci_irq_disable(dev);
 }
 
 void