Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:
 "There are not too many changes this time, except two new platform
  thermal drivers, ti-soc-thermal driver and x86_pkg_temp_thermal
  driver, and a couple of small fixes.

  Highlights:

   - move the ti-soc-thermal driver out of the staging tree to the
     thermal tree.

   - introduce the x86_pkg_temp_thermal driver.  This driver registers
     CPU digital temperature package level sensor as a thermal zone.

   - small fixes/cleanups including removing redundant use of
     platform_set_drvdata() and of_match_ptr for all platform thermal
     drivers"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
  thermal: cpu_cooling: fix stub function
  thermal: ti-soc-thermal: use standard GPIO DT bindings
  thermal: MAINTAINERS: Add git tree path for SoC specific updates
  thermal: fix x86_pkg_temp_thermal.c build and Kconfig
  Thermal: Documentation for x86 package temperature thermal driver
  Thermal: CPU Package temperature thermal
  thermal: consider emul_temperature while computing trend
  thermal: ti-soc-thermal: add DT example for DRA752 chip
  thermal: ti-soc-thermal: add dra752 chip to device table
  thermal: ti-soc-thermal: add thermal data for DRA752 chips
  thermal: ti-soc-thermal: remove usage of IS_ERR_OR_NULL
  thermal: ti-soc-thermal: freeze FSM while computing trend
  thermal: ti-soc-thermal: remove external heat while extrapolating hotspot
  thermal: ti-soc-thermal: update DT reference for OMAP5430
  x86, mcheck, therm_throt: Process package thresholds
  thermal: cpu_cooling: fix 'descend' check in get_property()
  Thermal: spear: Remove redundant use of of_match_ptr
  Thermal: kirkwood: Remove redundant use of of_match_ptr
  Thermal: dove: Remove redundant use of of_match_ptr
  Thermal: armada: Remove redundant use of of_match_ptr
  ...

Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt

@@ -17,8 +17,9 @@ Required properties:
 - interrupts : this entry should indicate which interrupt line
 the talert signal is routed to;
 Specific:
-- ti,tshut-gpio : this entry should be used to inform which GPIO
-line the tshut signal is routed to;
+- gpios : this entry should be used to inform which GPIO
+line the tshut signal is routed to. The informed GPIO will
+be treated as an IRQ;
 - regs : this entry must also be specified and it is specific
 to each bandgap version, because the mapping may change from
 soc to soc, apart of depending on available features.
@@ -37,7 +38,7 @@ bandgap {
 		0x4a002378 0x18>;
 	compatible = "ti,omap4460-bandgap";
 	interrupts = <0 126 4>; /* talert */
-	ti,tshut-gpio = <86>;
+	gpios = <&gpio3 22 0>; /* tshut */
 };
 
 OMAP4470:
@@ -47,7 +48,7 @@ bandgap {
 		0x4a002378 0x18>;
 	compatible = "ti,omap4470-bandgap";
 	interrupts = <0 126 4>; /* talert */
-	ti,tshut-gpio = <86>;
+	gpios = <&gpio3 22 0>; /* tshut */
 };
 
 OMAP5430:
@@ -59,3 +60,15 @@ bandgap {
 	compatible = "ti,omap5430-bandgap";
 	interrupts = <0 126 4>; /* talert */
 };
+
+DRA752:
+bandgap {
+	reg = <0x4a0021e0 0xc
+		0x4a00232c 0xc
+		0x4a002380 0x2c
+		0x4a0023C0 0x3c
+		0x4a002564 0x8
+		0x4a002574 0x50>;
+	compatible = "ti,dra752-bandgap";
+	interrupts = <0 126 4>; /* talert */
+};

Documentation/thermal/x86_pkg_temperature_thermal

@@ -0,0 +1,47 @@
+Kernel driver: x86_pkg_temp_thermal
+===================
+
+Supported chips:
+* x86: with package level thermal management
+(Verify using: CPUID.06H:EAX[bit 6] =1)
+
+Authors: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+
+Reference
+---
+Intel® 64 and IA-32 Architectures Software Developer’s Manual (Jan, 2013):
+Chapter 14.6: PACKAGE LEVEL THERMAL MANAGEMENT
+
+Description
+---------
+
+This driver register CPU digital temperature package level sensor as a thermal
+zone with maximum two user mode configurable trip points. Number of trip points
+depends on the capability of the package. Once the trip point is violated,
+user mode can receive notification via thermal notification mechanism and can
+take any action to control temperature.
+
+
+Threshold management
+--------------------
+Each package will register as a thermal zone under /sys/class/thermal.
+Example:
+/sys/class/thermal/thermal_zone1
+
+This contains two trip points:
+- trip_point_0_temp
+- trip_point_1_temp
+
+User can set any temperature between 0 to TJ-Max temperature. Temperature units
+are in milli-degree Celsius. Refer to "Documentation/thermal/sysfs-api.txt" for
+thermal sys-fs details.
+
+Any value other than 0 in these trip points, can trigger thermal notifications.
+Setting 0, stops sending thermal notifications.
+
+Thermal notifications: To get kobject-uevent notifications, set the thermal zone
+policy to "user_space". For example: echo -n "user_space" > policy
+
+
+
+

MAINTAINERS

@@ -8159,6 +8159,7 @@ M:      Zhang Rui <rui.zhang@intel.com>
 M:      Eduardo Valentin <eduardo.valentin@ti.com>
 L:      linux-pm@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
 Q:      https://patchwork.kernel.org/project/linux-pm/list/
 S:      Supported
 F:      drivers/thermal/
@@ -8183,8 +8184,8 @@ F:	drivers/platform/x86/thinkpad_acpi.c
 TI BANDGAP AND THERMAL DRIVER
 M:	Eduardo Valentin <eduardo.valentin@ti.com>
 L:	linux-pm@vger.kernel.org
-S:	Maintained
-F:	drivers/staging/omap-thermal/
+S:	Supported
+F:	drivers/thermal/ti-soc-thermal/
 
 TI FLASH MEDIA INTERFACE DRIVER
 M:	Alex Dubov <oakad@yahoo.com>

arch/x86/include/asm/mce.h

@@ -214,6 +214,13 @@ void mce_log_therm_throt_event(__u64 status);
 /* Interrupt Handler for core thermal thresholds */
 extern int (*platform_thermal_notify)(__u64 msr_val);
 
+/* Interrupt Handler for package thermal thresholds */
+extern int (*platform_thermal_package_notify)(__u64 msr_val);
+
+/* Callback support of rate control, return true, if
+ * callback has rate control */
+extern bool (*platform_thermal_package_rate_control)(void);
+
 #ifdef CONFIG_X86_THERMAL_VECTOR
 extern void mcheck_intel_therm_init(void);
 #else

arch/x86/kernel/cpu/mcheck/therm_throt.c

@@ -55,12 +55,24 @@ struct thermal_state {
 	struct _thermal_state package_power_limit;
 	struct _thermal_state core_thresh0;
 	struct _thermal_state core_thresh1;
+	struct _thermal_state pkg_thresh0;
+	struct _thermal_state pkg_thresh1;
 };
 
 /* Callback to handle core threshold interrupts */
 int (*platform_thermal_notify)(__u64 msr_val);
 EXPORT_SYMBOL(platform_thermal_notify);
 
+/* Callback to handle core package threshold_interrupts */
+int (*platform_thermal_package_notify)(__u64 msr_val);
+EXPORT_SYMBOL_GPL(platform_thermal_package_notify);
+
+/* Callback support of rate control, return true, if
+ * callback has rate control */
+bool (*platform_thermal_package_rate_control)(void);
+EXPORT_SYMBOL_GPL(platform_thermal_package_rate_control);
+
+
 static DEFINE_PER_CPU(struct thermal_state, thermal_state);
 
 static atomic_t therm_throt_en	= ATOMIC_INIT(0);
@@ -195,19 +207,25 @@ static int therm_throt_process(bool new_event, int event, int level)
 	return 0;
 }
 
-static int thresh_event_valid(int event)
+static int thresh_event_valid(int level, int event)
 {
 	struct _thermal_state *state;
 	unsigned int this_cpu = smp_processor_id();
 	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
 	u64 now = get_jiffies_64();
 
-	state = (event == 0) ? &pstate->core_thresh0 : &pstate->core_thresh1;
+	if (level == PACKAGE_LEVEL)
+		state = (event == 0) ? &pstate->pkg_thresh0 :
+						&pstate->pkg_thresh1;
+	else
+		state = (event == 0) ? &pstate->core_thresh0 :
+						&pstate->core_thresh1;
 
 	if (time_before64(now, state->next_check))
 		return 0;
 
 	state->next_check = now + CHECK_INTERVAL;
+
 	return 1;
 }
 
@@ -322,6 +340,39 @@ device_initcall(thermal_throttle_init_device);
 
 #endif /* CONFIG_SYSFS */
 
+static void notify_package_thresholds(__u64 msr_val)
+{
+	bool notify_thres_0 = false;
+	bool notify_thres_1 = false;
+
+	if (!platform_thermal_package_notify)
+		return;
+
+	/* lower threshold check */
+	if (msr_val & THERM_LOG_THRESHOLD0)
+		notify_thres_0 = true;
+	/* higher threshold check */
+	if (msr_val & THERM_LOG_THRESHOLD1)
+		notify_thres_1 = true;
+
+	if (!notify_thres_0 && !notify_thres_1)
+		return;
+
+	if (platform_thermal_package_rate_control &&
+		platform_thermal_package_rate_control()) {
+		/* Rate control is implemented in callback */
+		platform_thermal_package_notify(msr_val);
+		return;
+	}
+
+	/* lower threshold reached */
+	if (notify_thres_0 && thresh_event_valid(PACKAGE_LEVEL, 0))
+		platform_thermal_package_notify(msr_val);
+	/* higher threshold reached */
+	if (notify_thres_1 && thresh_event_valid(PACKAGE_LEVEL, 1))
+		platform_thermal_package_notify(msr_val);
+}
+
 static void notify_thresholds(__u64 msr_val)
 {
 	/* check whether the interrupt handler is defined;
@@ -331,10 +382,12 @@ static void notify_thresholds(__u64 msr_val)
 		return;
 
 	/* lower threshold reached */
-	if ((msr_val & THERM_LOG_THRESHOLD0) &&	thresh_event_valid(0))
+	if ((msr_val & THERM_LOG_THRESHOLD0) &&
+			thresh_event_valid(CORE_LEVEL, 0))
 		platform_thermal_notify(msr_val);
 	/* higher threshold reached */
-	if ((msr_val & THERM_LOG_THRESHOLD1) && thresh_event_valid(1))
+	if ((msr_val & THERM_LOG_THRESHOLD1) &&
+			thresh_event_valid(CORE_LEVEL, 1))
 		platform_thermal_notify(msr_val);
 }
 
@@ -360,6 +413,8 @@ static void intel_thermal_interrupt(void)
 
 	if (this_cpu_has(X86_FEATURE_PTS)) {
 		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
+		/* check violations of package thermal thresholds */
+		notify_package_thresholds(msr_val);
 		therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
 					THERMAL_THROTTLING_EVENT,
 					PACKAGE_LEVEL);

drivers/staging/Kconfig

@@ -120,8 +120,6 @@ source "drivers/staging/gdm72xx/Kconfig"
 
 source "drivers/staging/csr/Kconfig"
 
-source "drivers/staging/ti-soc-thermal/Kconfig"
-
 source "drivers/staging/silicom/Kconfig"
 
 source "drivers/staging/ced1401/Kconfig"

drivers/staging/Makefile

@@ -53,7 +53,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_USB_WPAN_HCD)	+= ozwpan/
 obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/
 obj-$(CONFIG_CSR_WIFI)		+= csr/
-obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-$(CONFIG_NET_VENDOR_SILICOM)	+= silicom/
 obj-$(CONFIG_CED1401)		+= ced1401/
 obj-$(CONFIG_DRM_IMX)		+= imx-drm/

drivers/thermal/Kconfig

@@ -169,4 +169,19 @@ config INTEL_POWERCLAMP
 	  enforce idle time which results in more package C-state residency. The
 	  user interface is exposed via generic thermal framework.
 
+config X86_PKG_TEMP_THERMAL
+	tristate "X86 package temperature thermal driver"
+	depends on X86_THERMAL_VECTOR
+	select THERMAL_GOV_USER_SPACE
+	default m
+	help
+	  Enable this to register CPU digital sensor for package temperature as
+	  thermal zone. Each package will have its own thermal zone. There are
+	  two trip points which can be set by user to get notifications via thermal
+	  notification methods.
+
+menu "Texas Instruments thermal drivers"
+source "drivers/thermal/ti-soc-thermal/Kconfig"
+endmenu
+
 endif

drivers/thermal/Makefile

@@ -23,4 +23,5 @@ obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
-
+obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
+obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/

drivers/thermal/armada_thermal.c

@@ -200,7 +200,6 @@ static int armada_thermal_exit(struct platform_device *pdev)
 		platform_get_drvdata(pdev);
 
 	thermal_zone_device_unregister(armada_thermal);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -211,7 +210,7 @@ static struct platform_driver armada_thermal_driver = {
 	.driver = {
 		.name = "armada_thermal",
 		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(armada_thermal_id_table),
+		.of_match_table = armada_thermal_id_table,
 	},
 };
 

drivers/thermal/cpu_cooling.c

@@ -167,7 +167,7 @@ static int get_property(unsigned int cpu, unsigned long input,
 			continue;
 
 		/* get the frequency order */
-		if (freq != CPUFREQ_ENTRY_INVALID && descend != -1)
+		if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
 			descend = !!(freq > table[i].frequency);
 
 		freq = table[i].frequency;

drivers/thermal/dove_thermal.c

@@ -134,16 +134,11 @@ static int dove_thermal_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get platform resource\n");
-		return -ENODEV;
-	}
-
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->sensor = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(priv->sensor))
 		return PTR_ERR(priv->sensor);
@@ -178,7 +173,6 @@ static int dove_thermal_exit(struct platform_device *pdev)
 		platform_get_drvdata(pdev);
 
 	thermal_zone_device_unregister(dove_thermal);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -191,7 +185,7 @@ static struct platform_driver dove_thermal_driver = {
 	.driver = {
 		.name = "dove_thermal",
 		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(dove_thermal_id_table),
+		.of_match_table = dove_thermal_id_table,
 	},
 };
 

drivers/thermal/exynos_thermal.c

@@ -997,7 +997,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 
 	return 0;
 err_clk:
-	platform_set_drvdata(pdev, NULL);
 	clk_unprepare(data->clk);
 	return ret;
 }
@@ -1012,8 +1011,6 @@ static int exynos_tmu_remove(struct platform_device *pdev)
 
 	clk_unprepare(data->clk);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/thermal/kirkwood_thermal.c

@@ -75,16 +75,11 @@ static int kirkwood_thermal_probe(struct platform_device *pdev)
 	struct kirkwood_thermal_priv *priv;
 	struct resource *res;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get platform resource\n");
-		return -ENODEV;
-	}
-
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->sensor = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(priv->sensor))
 		return PTR_ERR(priv->sensor);
@@ -108,7 +103,6 @@ static int kirkwood_thermal_exit(struct platform_device *pdev)
 		platform_get_drvdata(pdev);
 
 	thermal_zone_device_unregister(kirkwood_thermal);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -121,7 +115,7 @@ static struct platform_driver kirkwood_thermal_driver = {
 	.driver = {
 		.name = "kirkwood_thermal",
 		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(kirkwood_thermal_id_table),
+		.of_match_table = kirkwood_thermal_id_table,
 	},
 };
 

drivers/thermal/rcar_thermal.c

@@ -389,11 +389,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		 * platform has IRQ support.
 		 * Then, drier use common register
 		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
-		if (!res) {
-			dev_err(dev, "Could not get platform resource\n");
-			return -ENODEV;
-		}
 
 		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
 				       dev_name(dev), common);
@@ -405,6 +400,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		/*
 		 * rcar_has_irq_support() will be enabled
 		 */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
 		common->base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(common->base))
 			return PTR_ERR(common->base);
@@ -458,7 +454,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, common);
 
-	dev_info(dev, "%d sensor proved\n", i);
+	dev_info(dev, "%d sensor probed\n", i);
 
 	return 0;
 
@@ -487,8 +483,6 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 			rcar_thermal_irq_disable(priv);
 	}
 
-	platform_set_drvdata(pdev, NULL);
-
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 

drivers/thermal/spear_thermal.c

@@ -104,7 +104,7 @@ static int spear_thermal_probe(struct platform_device *pdev)
 	struct thermal_zone_device *spear_thermal = NULL;
 	struct spear_thermal_dev *stdev;
 	struct device_node *np = pdev->dev.of_node;
-	struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *res;
 	int ret = 0, val;
 
 	if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) {
@@ -112,11 +112,6 @@ static int spear_thermal_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (!stres) {
-		dev_err(&pdev->dev, "memory resource missing\n");
-		return -ENODEV;
-	}
-
 	stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
 	if (!stdev) {
 		dev_err(&pdev->dev, "kzalloc fail\n");
@@ -124,12 +119,10 @@ static int spear_thermal_probe(struct platform_device *pdev)
 	}
 
 	/* Enable thermal sensor */
-	stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start,
-			resource_size(stres));
-	if (!stdev->thermal_base) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		return -ENOMEM;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	stdev->thermal_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(stdev->thermal_base))
+		return PTR_ERR(stdev->thermal_base);
 
 	stdev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(stdev->clk)) {
@@ -174,7 +167,6 @@ static int spear_thermal_exit(struct platform_device *pdev)
 	struct spear_thermal_dev *stdev = spear_thermal->devdata;
 
 	thermal_zone_device_unregister(spear_thermal);
-	platform_set_drvdata(pdev, NULL);
 
 	/* Disable SPEAr Thermal Sensor */
 	actual_mask = readl_relaxed(stdev->thermal_base);
@@ -198,7 +190,7 @@ static struct platform_driver spear_thermal_driver = {
 		.name = "spear_thermal",
 		.owner = THIS_MODULE,
 		.pm = &spear_thermal_pm_ops,
-		.of_match_table = of_match_ptr(spear_thermal_id_table),
+		.of_match_table = spear_thermal_id_table,
 	},
 };
 

drivers/thermal/thermal_core.c

@@ -33,6 +33,7 @@
 #include <linux/idr.h>
 #include <linux/thermal.h>
 #include <linux/reboot.h>
+#include <linux/string.h>
 #include <net/netlink.h>
 #include <net/genetlink.h>
 
@@ -155,7 +156,8 @@ int get_tz_trend(struct thermal_zone_device *tz, int trip)
 {
 	enum thermal_trend trend;
 
-	if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) {
+	if (tz->emul_temperature || !tz->ops->get_trend ||
+	    tz->ops->get_trend(tz, trip, &trend)) {
 		if (tz->temperature > tz->last_temperature)
 			trend = THERMAL_TREND_RAISING;
 		else if (tz->temperature < tz->last_temperature)
@@ -713,10 +715,13 @@ policy_store(struct device *dev, struct device_attribute *attr,
 	int ret = -EINVAL;
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	struct thermal_governor *gov;
+	char name[THERMAL_NAME_LENGTH];
+
+	snprintf(name, sizeof(name), "%s", buf);
 
 	mutex_lock(&thermal_governor_lock);
 
-	gov = __find_governor(buf);
+	gov = __find_governor(strim(name));
 	if (!gov)
 		goto exit;
 
@@ -1624,7 +1629,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	if (!ops || !ops->get_temp)
 		return ERR_PTR(-EINVAL);
 
-	if (trips > 0 && !ops->get_trip_type)
+	if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
 		return ERR_PTR(-EINVAL);
 
 	tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL);

drivers/thermal/ti-soc-thermal/Kconfig

@@ -46,3 +46,15 @@ config OMAP5_THERMAL
 
 	  This includes alert interrupts generation and also the TSHUT
 	  support.
+
+config DRA752_THERMAL
+	bool "Texas Instruments DRA752 thermal support"
+	depends on TI_SOC_THERMAL
+	depends on SOC_DRA7XX
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  DRA752 SoC family. The current chip supported are:
+	   - DRA752
+
+	  This includes alert interrupts generation and also the TSHUT
+	  support.

drivers/thermal/ti-soc-thermal/Makefile

@@ -1,5 +1,6 @@
 obj-$(CONFIG_TI_SOC_THERMAL)		+= ti-soc-thermal.o
 ti-soc-thermal-y			:= ti-bandgap.o
 ti-soc-thermal-$(CONFIG_TI_THERMAL)	+= ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_DRA752_THERMAL)	+= dra752-thermal-data.o
 ti-soc-thermal-$(CONFIG_OMAP4_THERMAL)	+= omap4-thermal-data.o
 ti-soc-thermal-$(CONFIG_OMAP5_THERMAL)	+= omap5-thermal-data.o