Merge commit 'ccbf62d8a284cf181ac28c8e8407dd077d90dd4b' into for-next

backmerge to avoid kernel/acct.c conflict

Documentation/DocBook/device-drivers.tmpl

@@ -54,7 +54,7 @@
 !Ikernel/sched/cpupri.c
 !Ikernel/sched/fair.c
 !Iinclude/linux/completion.h
-!Ekernel/timer.c
+!Ekernel/time/timer.c
      </sect1>
      <sect1><title>Wait queues and Wake events</title>
 !Iinclude/linux/wait.h
@@ -63,7 +63,7 @@
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h
 !Iinclude/linux/hrtimer.h
-!Ekernel/hrtimer.c
+!Ekernel/time/hrtimer.c
      </sect1>
      <sect1><title>Workqueues and Kevents</title>
 !Ekernel/workqueue.c

Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt

@@ -0,0 +1,29 @@
+* Cirrus Logic CLPS711X Timer Counter
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-timer".
+- reg       : Address and length of the register set.
+- interrupts: The interrupt number of the timer.
+- clocks    : phandle of timer reference clock.
+
+Note: Each timer should have an alias correctly numbered in "aliases" node.
+
+Example:
+	aliases {
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	timer1: timer@80000300 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000300 0x4>;
+		interrupts = <8>;
+		clocks = <&clks 5>;
+	};
+
+	timer2: timer@80000340 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000340 0x4>;
+		interrupts = <9>;
+		clocks = <&clks 6>;
+	};

Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt

@@ -0,0 +1,17 @@
+Mediatek MT6577, MT6572 and MT6589 Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "mediatek,mt6577-timer"
+- reg: Should contain location and length for timers register.
+- clocks: Clocks driving the timer hardware. This list should include two
+	clocks. The order is system clock and as second clock the RTC clock.
+
+Examples:
+
+	timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+	};

Documentation/devicetree/bindings/timer/renesas,cmt.txt

@@ -0,0 +1,47 @@
+* Renesas R-Car Compare Match Timer (CMT)
+
+The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. A particular CMT instance can implement only a subset of the
+channels supported by the CMT model. Channel indices represent the hardware
+position of the channel in the CMT and don't match the channel numbers in the
+datasheets.
+
+Required Properties:
+
+  - compatible: must contain one of the following.
+    - "renesas,cmt-32" for the 32-bit CMT
+		(CMT0 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+		(CMT[234] on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48" for the 48-bit CMT
+		(CMT1 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
+
+  - reg: base address and length of the registers block for the timer module.
+  - interrupts: interrupt-specifier for the timer, one per channel.
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+  - renesas,channels-mask: bitmask of the available channels.
+
+
+Example: R8A7790 (R-Car H2) CMT0 node
+
+	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
+	them channels 0 and 1 in the documentation.
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+	};

Documentation/devicetree/bindings/timer/renesas,mtu2.txt

@@ -0,0 +1,39 @@
+* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+
+The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
+clock inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+Required Properties:
+
+  - compatible: must contain "renesas,mtu2"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt specifiers for the timer, one for each entry in
+    interrupt-names.
+  - interrupt-names: must contain one entry named "tgi?a" for each enabled
+    channel, where "?" is the channel index expressed as one digit from "0" to
+    "4".
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+
+Example: R7S72100 (RZ/A1H) MTU2 node
+
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+	};

Documentation/devicetree/bindings/timer/renesas,tmu.txt

@@ -0,0 +1,39 @@
+* Renesas R-Car Timer Unit (TMU)
+
+The TMU is a 32-bit timer/counter with configurable clock inputs and
+programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The TMU hardware supports up to three channels.
+
+Required Properties:
+
+  - compatible: must contain "renesas,tmu"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt-specifier for the timer, one per channel.
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+Optional Properties:
+
+  - #renesas,channels: number of channels implemented by the timer, must be 2
+    or 3 (if not specified the value defaults to 3).
+
+
+Example: R8A7779 (R-Car H1) TMU0 node
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -77,6 +77,7 @@ lsi	LSI Corp. (LSI Logic)
 lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
+mediatek	MediaTek Inc.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.

Documentation/filesystems/proc.txt

@@ -1743,6 +1743,25 @@ pair provide additional information particular to the objects they represent.
 	While the first three lines are mandatory and always printed, the rest is
 	optional and may be omitted if no marks created yet.
 
+	Timerfd files
+	~~~~~~~~~~~~~
+
+	pos:	0
+	flags:	02
+	mnt_id:	9
+	clockid: 0
+	ticks: 0
+	settime flags: 01
+	it_value: (0, 49406829)
+	it_interval: (1, 0)
+
+	where 'clockid' is the clock type and 'ticks' is the number of the timer expirations
+	that have occurred [see timerfd_create(2) for details]. 'settime flags' are
+	flags in octal form been used to setup the timer [see timerfd_settime(2) for
+	details]. 'it_value' is remaining time until the timer exiration.
+	'it_interval' is the interval for the timer. Note the timer might be set up
+	with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
+	still exhibits timer's remaining time.
 
 ------------------------------------------------------------------------------
 Configuring procfs

MAINTAINERS

@@ -4204,7 +4204,7 @@ L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
 F:	Documentation/timers/
-F:	kernel/hrtimer.c
+F:	kernel/time/hrtimer.c
 F:	kernel/time/clockevents.c
 F:	kernel/time/tick*.*
 F:	kernel/time/timer_*.c
@@ -7026,10 +7026,10 @@ POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
-S:	Supported
+S:	Maintained
 F:	fs/timerfd.c
 F:	include/linux/timer*
-F:	kernel/*timer*
+F:	kernel/time/*timer*
 
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
 M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

arch/arm/Kconfig

@@ -65,7 +65,6 @@ config ARM
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
-	select KTIME_SCALAR
 	select MODULES_USE_ELF_REL
 	select NO_BOOTMEM
 	select OLD_SIGACTION
@@ -635,6 +634,7 @@ config ARCH_PXA
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE

arch/arm/mach-pxa/Makefile

@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o \
-				   time.o reset.o
+				   reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
 # Generic drivers that other drivers may depend upon

arch/arm/mach-pxa/generic.c

@@ -25,11 +25,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
+#include <mach/irqs.h>
 #include <mach/reset.h>
 #include <mach/smemc.h>
 #include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
+#include <clocksource/pxa.h>
 
 void clear_reset_status(unsigned int mask)
 {
@@ -56,6 +58,15 @@ unsigned long get_clock_tick_rate(void)
 }
 EXPORT_SYMBOL(get_clock_tick_rate);
 
+/*
+ * For non device-tree builds, keep legacy timer init
+ */
+void pxa_timer_init(void)
+{
+	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
+			    get_clock_tick_rate());
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.

arch/arm/mach-pxa/time.c

@@ -1,162 +0,0 @@
-/*
- * arch/arm/mach-pxa/time.c
- *
- * PXA clocksource, clockevents, and OST interrupt handlers.
- * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>.
- *
- * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001
- * by MontaVista Software, Inc.  (Nico, your code rocks!)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-
-#include <asm/div64.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <mach/regs-ost.h>
-#include <mach/irqs.h>
-
-/*
- * This is PXA's sched_clock implementation. This has a resolution
- * of at least 308 ns and a maximum value of 208 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to sched_clock() which should always be the case in practice.
- */
-
-static u64 notrace pxa_read_sched_clock(void)
-{
-	return readl_relaxed(OSCR);
-}
-
-
-#define MIN_OSCR_DELTA 16
-
-static irqreturn_t
-pxa_ost0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* Disarm the compare/match, signal the event. */
-	writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
-	writel_relaxed(OSSR_M0, OSSR);
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int
-pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	unsigned long next, oscr;
-
-	writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER);
-	next = readl_relaxed(OSCR) + delta;
-	writel_relaxed(next, OSMR0);
-	oscr = readl_relaxed(OSCR);
-
-	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static void
-pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
-		writel_relaxed(OSSR_M0, OSSR);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* initializing, released, or preparing for suspend */
-		writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
-		writel_relaxed(OSSR_M0, OSSR);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
-}
-
-#ifdef CONFIG_PM
-static unsigned long osmr[4], oier, oscr;
-
-static void pxa_timer_suspend(struct clock_event_device *cedev)
-{
-	osmr[0] = readl_relaxed(OSMR0);
-	osmr[1] = readl_relaxed(OSMR1);
-	osmr[2] = readl_relaxed(OSMR2);
-	osmr[3] = readl_relaxed(OSMR3);
-	oier = readl_relaxed(OIER);
-	oscr = readl_relaxed(OSCR);
-}
-
-static void pxa_timer_resume(struct clock_event_device *cedev)
-{
-	/*
-	 * Ensure that we have at least MIN_OSCR_DELTA between match
-	 * register 0 and the OSCR, to guarantee that we will receive
-	 * the one-shot timer interrupt.  We adjust OSMR0 in preference
-	 * to OSCR to guarantee that OSCR is monotonically incrementing.
-	 */
-	if (osmr[0] - oscr < MIN_OSCR_DELTA)
-		osmr[0] += MIN_OSCR_DELTA;
-
-	writel_relaxed(osmr[0], OSMR0);
-	writel_relaxed(osmr[1], OSMR1);
-	writel_relaxed(osmr[2], OSMR2);
-	writel_relaxed(osmr[3], OSMR3);
-	writel_relaxed(oier, OIER);
-	writel_relaxed(oscr, OSCR);
-}
-#else
-#define pxa_timer_suspend NULL
-#define pxa_timer_resume NULL
-#endif
-
-static struct clock_event_device ckevt_pxa_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= pxa_osmr0_set_next_event,
-	.set_mode	= pxa_osmr0_set_mode,
-	.suspend	= pxa_timer_suspend,
-	.resume		= pxa_timer_resume,
-};
-
-static struct irqaction pxa_ost0_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pxa_ost0_interrupt,
-	.dev_id		= &ckevt_pxa_osmr0,
-};
-
-void __init pxa_timer_init(void)
-{
-	unsigned long clock_tick_rate = get_clock_tick_rate();
-
-	writel_relaxed(0, OIER);
-	writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
-	sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate);
-
-	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
-
-	setup_irq(IRQ_OST0, &pxa_ost0_irq);
-
-	clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
-		clocksource_mmio_readl_up);
-	clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
-		MIN_OSCR_DELTA * 2, 0x7fffffff);
-}

arch/hexagon/Kconfig

@@ -23,7 +23,6 @@ config HEXAGON
 	select GENERIC_IOMAP
 	select GENERIC_SMP_IDLE_THREAD
 	select STACKTRACE_SUPPORT
-	select KTIME_SCALAR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select MODULES_USE_ELF_RELA

arch/s390/Kconfig

@@ -137,7 +137,6 @@ config S390
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16 if 32BIT
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select KTIME_SCALAR if 32BIT
 	select MODULES_USE_ELF_RELA
 	select NO_BOOTMEM
 	select OLD_SIGACTION

arch/tile/kernel/time.c

@@ -260,7 +260,6 @@ void update_vsyscall_tz(void)
 
 void update_vsyscall(struct timekeeper *tk)
 {
-	struct timespec wall_time = tk_xtime(tk);
 	struct timespec *wtm = &tk->wall_to_monotonic;
 	struct clocksource *clock = tk->clock;
 
@@ -271,12 +270,12 @@ void update_vsyscall(struct timekeeper *tk)
 	++vdso_data->tb_update_count;
 	smp_wmb();
 	vdso_data->xtime_tod_stamp = clock->cycle_last;
-	vdso_data->xtime_clock_sec = wall_time.tv_sec;
-	vdso_data->xtime_clock_nsec = wall_time.tv_nsec;
+	vdso_data->xtime_clock_sec = tk->xtime_sec;
+	vdso_data->xtime_clock_nsec = tk->xtime_nsec;
 	vdso_data->wtom_clock_sec = wtm->tv_sec;
 	vdso_data->wtom_clock_nsec = wtm->tv_nsec;
-	vdso_data->mult = clock->mult;
-	vdso_data->shift = clock->shift;
+	vdso_data->mult = tk->mult;
+	vdso_data->shift = tk->shift;
 	smp_wmb();
 	++vdso_data->tb_update_count;
 }

arch/tile/kernel/vdso/vgettimeofday.c

@@ -83,10 +83,11 @@ int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
 		if (count & 1)
 			continue;
 
-		cycles = (get_cycles() - vdso_data->xtime_tod_stamp);
-		ns = (cycles * vdso_data->mult) >> vdso_data->shift;
 		sec = vdso_data->xtime_clock_sec;
-		ns += vdso_data->xtime_clock_nsec;
+		cycles = get_cycles() - vdso_data->xtime_tod_stamp;
+		ns = (cycles * vdso_data->mult) + vdso_data->xtime_clock_nsec;
+		ns >>= vdso_data->shift;
+
 		if (ns >= NSEC_PER_SEC) {
 			ns -= NSEC_PER_SEC;
 			sec += 1;

arch/x86/Kconfig

@@ -111,7 +111,6 @@ config X86
 	select ARCH_CLOCKSOURCE_DATA
 	select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
 	select GENERIC_TIME_VSYSCALL
-	select KTIME_SCALAR if X86_32
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HAVE_CONTEXT_TRACKING if X86_64

drivers/clocksource/Kconfig

@@ -1,3 +1,5 @@
+menu "Clock Source drivers"
+
 config CLKSRC_OF
 	bool
 
@@ -125,6 +127,7 @@ config CLKSRC_METAG_GENERIC
 
 config CLKSRC_EXYNOS_MCT
 	def_bool y if ARCH_EXYNOS
+	depends on !ARM64
 	help
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
@@ -149,6 +152,11 @@ config VF_PIT_TIMER
 config SYS_SUPPORTS_SH_CMT
         bool
 
+config MTK_TIMER
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+	bool
+
 config SYS_SUPPORTS_SH_MTU2
         bool
 
@@ -173,7 +181,7 @@ config SH_TIMER_MTU2
 	default SYS_SUPPORTS_SH_MTU2
 	help
 	  This enables build of a clockevent driver for the Multi-Function
-	  Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas.
+	  Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
 	  This hardware comes with 16 bit-timer registers.
 
 config SH_TIMER_TMU
@@ -187,7 +195,7 @@ config SH_TIMER_TMU
 
 config EM_TIMER_STI
 	bool "Renesas STI timer driver" if COMPILE_TEST
-	depends on GENERIC_CLOCKEVENTS
+	depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
 	default SYS_SUPPORTS_EM_STI
 	help
 	  This enables build of a clocksource and clockevent driver for
@@ -207,3 +215,5 @@ config CLKSRC_VERSATILE
 	  counter available in the "System Registers" block of
 	  ARM Versatile, RealView and Versatile Express reference
 	  platforms.
+
+endmenu

drivers/clocksource/Makefile

@@ -16,9 +16,11 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
+obj-$(CONFIG_ARCH_CLPS711X)	+= clps711x-timer.o
 obj-$(CONFIG_ARCH_MARCO)	+= timer-marco.o
 obj-$(CONFIG_ARCH_MOXART)	+= moxart_timer.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
+obj-$(CONFIG_ARCH_PXA)		+= pxa_timer.o
 obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
 obj-$(CONFIG_ARCH_U300)		+= timer-u300.o
 obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
@@ -34,6 +36,7 @@ obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
 obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
+obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o