dasharo/linux
0
0
Fork 0
mirror of https://github.com/Dasharo/linux.git synced 2026-03-06 15:25:10 -08:00
Code Issues Packages Projects Releases Wiki Activity

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Browse Source 
Pull ARM SoC board specific changes from Arnd Bergmann:
 "These updates are all for board specific code, including

   - defconfig updates for shmobile, davinci, bcm2835, imx, omap and
     tegra

   - SD/MMC and I2C support on bcm2835 (Raspberry PI)

   - minor updates for PXA

   - shmobile updates to GPIO usage in board files

   - More things in OMAP board files are moved over to device tree
     probing

   - Better support for audio devices on some OMAP platforms"

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: imx_v4_v5_defconfig: Add VPU support
  ARM: imx: configs: enable netfilter support
  ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
  ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
  RX-51: Register twl4030-madc device
  RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
  ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
  ARM: OMAP1: nokia770: enable CBUS/Retu
  ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
  ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
  ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
  ARM: OMAP2+: craneboard: support the TPS65910 PMU
  ARM: OMAP2+: craneboard: support NAND device
  ARM: OMAP3: cm-t3517: add MMC support
  ARM: OMAP2+: Remove apollon board support
  ARM: shmobile: armadillo800eva: set clock rates before timer init
  ARM: tegra: defconfig updates
  ARM: shmobile: mackerel: Use gpio_request_one()
  ARM: shmobile: kzm9g: Use gpio_request_one()
  ARM: shmobile: bonito: Use gpio_request_one()
  ...
This commit is contained in:
Linus Torvalds
2013-02-21 15:33:45 -08:00
parent bab588fcfb f628e3d924
commit 6c5096e553
47 changed files with 536 additions and 640 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/emev2-kzm9d.dts
View File

@@ -21,6 +21,6 @@
};
chosen {
bootargs = "console=ttyS1,115200n81";
bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
};

6
arch/arm/boot/dts/r8a7740-armadillo800eva.dts
View File

@@ -9,12 +9,16 @@
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/include/ "r8a7740.dtsi"
/ {
model = "armadillo 800 eva";
compatible = "renesas,armadillo800eva";
chosen {
bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;

6
arch/arm/boot/dts/sh7372-mackerel.dts
View File

@@ -9,12 +9,16 @@
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/include/ "sh7372.dtsi"
/ {
model = "Mackerel (AP4 EVM 2nd)";
compatible = "renesas,mackerel";
chosen {
bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw";
};
memory {
device_type = "memory";
reg = <0x40000000 0x10000000>;

6
arch/arm/boot/dts/sh73a0-kzm9g.dts
View File

@@ -9,12 +9,16 @@
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/include/ "sh73a0.dtsi"
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
};
memory {
device_type = "memory";
reg = <0x41000000 0x1e800000>;

10
arch/arm/configs/armadillo800eva_defconfig
View File

@@ -34,12 +34,11 @@ CONFIG_AEABI=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
CONFIG_CMDLINE_FORCE=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -91,14 +90,11 @@ CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
# CONFIG_RC_CORE is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9T112=y
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_HDMI=y

43
arch/arm/configs/bcm2835_defconfig
View File

@@ -1,11 +1,10 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
@@ -30,13 +29,10 @@ CONFIG_EMBEDDED=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
# CONFIG_BLOCK is not set
CONFIG_ARCH_BCM2835=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_COMPACTION=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_CLEANCACHE=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
@@ -45,6 +41,11 @@ CONFIG_CRASH_DUMP=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
@@ -53,20 +54,42 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BCM2835=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_BCM2835=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_FANOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFSD=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set

3
arch/arm/configs/da8xx_omapl_defconfig
View File

@@ -36,6 +36,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_IDLE=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -45,6 +46,8 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_RAM=y

3
arch/arm/configs/davinci_all_defconfig
View File

@@ -33,6 +33,7 @@ CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -42,6 +43,8 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=m
CONFIG_MTD_PARTITIONS=y

3
arch/arm/configs/imx_v4_v5_defconfig
View File

@@ -61,6 +61,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -127,6 +128,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_MX2=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y

1
arch/arm/configs/imx_v6_v7_defconfig
View File

@@ -59,6 +59,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y

2
arch/arm/configs/kota2_defconfig
View File

@@ -21,7 +21,7 @@ CONFIG_ARCH_SHMOBILE=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_ARCH_SH73A0=y
CONFIG_MACH_KOTA2=y
CONFIG_MEMORY_SIZE=0x1e0000000
CONFIG_MEMORY_SIZE=0x1e000000
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_SWP_EMULATE is not set
CONFIG_CPU_BPREDICT_DISABLE=y

4
arch/arm/configs/kzm9d_defconfig
View File

@@ -32,11 +32,9 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
CONFIG_CMDLINE_FORCE=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

4
arch/arm/configs/kzm9g_defconfig
View File

@@ -39,7 +39,7 @@ CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_VFP=y
CONFIG_NEON=y
@@ -85,6 +85,8 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_GPIO_PCF857X=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DUMMY=y
CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FRAMEBUFFER_CONSOLE=y

3
arch/arm/configs/mackerel_defconfig
View File

@@ -23,8 +23,9 @@ CONFIG_AEABI=y
CONFIG_FORCE_MAX_ZONEORDER=15
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m"
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM=y
CONFIG_PM_RUNTIME=y

25
arch/arm/configs/omap2plus_defconfig
View File

@@ -53,6 +53,11 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_BT=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
@@ -65,6 +70,7 @@ CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CMA=y
CONFIG_CONNECTOR=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -84,6 +90,9 @@ CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@@ -109,6 +118,7 @@ CONFIG_USB_KC2190=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_TWL4030=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
@@ -134,14 +144,17 @@ CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
CONFIG_W1=y
CONFIG_POWER_SUPPLY=y
CONFIG_SENSORS_LM75=m
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
@@ -153,6 +166,7 @@ CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2=m
CONFIG_PANEL_GENERIC_DPI=m
CONFIG_PANEL_TFP410=m
CONFIG_PANEL_SHARP_LS037V7DW01=m
CONFIG_PANEL_NEC_NL8048HL11_01B=m
CONFIG_PANEL_TAAL=m
@@ -200,9 +214,20 @@ CONFIG_SDIO_UART=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_DMADEVICES=y
CONFIG_DMA_OMAP=y
CONFIG_EXT2_FS=y

6
arch/arm/configs/tegra_defconfig
View File

@@ -38,6 +38,7 @@ CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_AUTO_ZRELADDR=y
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
@@ -106,12 +107,14 @@ CONFIG_BRCMFMAC=m
CONFIG_RT2X00=y
CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
@@ -127,6 +130,8 @@ CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
@@ -186,6 +191,7 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_TEGRA=y

102
arch/arm/mach-davinci/board-da850-evm.c
View File

@@ -349,13 +349,13 @@ static inline void da850_evm_setup_nor_nand(void)
if (!HAS_MMC) {
ret = davinci_cfg_reg_list(da850_evm_nand_pins);
if (ret)
pr_warning("da850_evm_init: nand mux setup failed: "
"%d\n", ret);
pr_warn("%s: NAND mux setup failed: %d\n",
__func__, ret);
ret = davinci_cfg_reg_list(da850_evm_nor_pins);
if (ret)
pr_warning("da850_evm_init: nor mux setup failed: %d\n",
ret);
pr_warn("%s: NOR mux setup failed: %d\n",
__func__, ret);
da850_evm_init_nor();
@@ -477,19 +477,19 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_a);
pr_warn("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_b);
pr_warn("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_c);
pr_warn("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
}
@@ -501,7 +501,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
da850_evm_ui_keys_init(gpio);
ret = platform_device_register(&da850_evm_ui_keys_device);
if (ret) {
pr_warning("Could not register UI GPIO expander push-buttons");
pr_warn("Could not register UI GPIO expander push-buttons");
goto exp_setup_keys_fail;
}
@@ -690,14 +690,14 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
da850_evm_bb_keys_init(gpio);
ret = platform_device_register(&da850_evm_bb_keys_device);
if (ret) {
pr_warning("Could not register baseboard GPIO expander keys");
pr_warn("Could not register baseboard GPIO expander keys");
goto io_exp_setup_sw_fail;
}
da850_evm_bb_leds_init(gpio);
ret = platform_device_register(&da850_evm_bb_leds_device);
if (ret) {
pr_warning("Could not register baseboard GPIO expander LEDS");
pr_warn("Could not register baseboard GPIO expander LEDs");
goto io_exp_setup_leds_fail;
}
@@ -1065,21 +1065,19 @@ static int __init da850_evm_config_emac(void)
}
if (ret)
pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
ret);
pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
__func__, ret);
/* configure the CFGCHIP3 register for RMII or MII */
__raw_writel(val, cfg_chip3_base);
ret = davinci_cfg_reg(DA850_GPIO2_6);
if (ret)
pr_warning("da850_evm_init:GPIO(2,6) mux setup "
"failed\n");
pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
if (ret) {
pr_warning("Cannot open GPIO %d\n",
DA850_MII_MDIO_CLKEN_PIN);
pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
return ret;
}
@@ -1090,8 +1088,7 @@ static int __init da850_evm_config_emac(void)
ret = da8xx_register_emac();
if (ret)
pr_warning("da850_evm_init: emac registration failed: %d\n",
ret);
pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
return 0;
}
@@ -1443,57 +1440,53 @@ static __init void da850_evm_init(void)
ret = pmic_tps65070_init();
if (ret)
pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
ret);
pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
ret = da850_register_edma(da850_edma_rsv);
if (ret)
pr_warning("da850_evm_init: edma registration failed: %d\n",
ret);
pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
ret = davinci_cfg_reg_list(da850_i2c0_pins);
if (ret)
pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
ret);
pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
if (ret)
pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
ret);
pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
ret = da8xx_register_watchdog();
if (ret)
pr_warning("da830_evm_init: watchdog registration failed: %d\n",
ret);
pr_warn("%s: watchdog registration failed: %d\n",
__func__, ret);
if (HAS_MMC) {
ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
if (ret)
pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
" %d\n", ret);
pr_warn("%s: MMCSD0 mux setup failed: %d\n",
__func__, ret);
ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
if (ret)
pr_warning("da850_evm_init: can not open GPIO %d\n",
DA850_MMCSD_CD_PIN);
pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_MMCSD_CD_PIN);
gpio_direction_input(DA850_MMCSD_CD_PIN);
ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
if (ret)
pr_warning("da850_evm_init: can not open GPIO %d\n",
DA850_MMCSD_WP_PIN);
pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_MMCSD_WP_PIN);
gpio_direction_input(DA850_MMCSD_WP_PIN);
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret)
pr_warning("da850_evm_init: mmcsd0 registration failed:"
" %d\n", ret);
pr_warn("%s: MMCSD0 registration failed: %d\n",
__func__, ret);
ret = da850_wl12xx_init();
if (ret)
pr_warning("da850_evm_init: wl12xx initialization"
" failed: %d\n", ret);
pr_warn("%s: WL12xx initialization failed: %d\n",
__func__, ret);
}
davinci_serial_init(&da850_evm_uart_config);
@@ -1511,16 +1504,14 @@ static __init void da850_evm_init(void)
ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
if (ret)
pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
ret);
pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
da850_evm_snd_data.sram_pool = sram_get_gen_pool();
da8xx_register_mcasp(0, &da850_evm_snd_data);
ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
if (ret)
pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
ret);
pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_uio_pruss();
if (ret)
@@ -1530,38 +1521,33 @@ static __init void da850_evm_init(void)
/* Handle board specific muxing for LCD here */
ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
if (ret)
pr_warning("da850_evm_init: evm specific lcd mux setup "
"failed: %d\n", ret);
pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
__func__, ret);
ret = da850_lcd_hw_init();
if (ret)
pr_warning("da850_evm_init: lcd initialization failed: %d\n",
ret);
pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warning("da850_evm_init: lcdc registration failed: %d\n",
ret);
pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
ret = da8xx_register_rtc();
if (ret)
pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
ret = da850_evm_init_cpufreq();
if (ret)
pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
ret);
pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
ret = da8xx_register_cpuidle();
if (ret)
pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
ret);
pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
ret = da850_register_pm(&da850_pm_device);
if (ret)
pr_warning("da850_evm_init: suspend registration failed: %d\n",
ret);
pr_warn("%s: suspend registration failed: %d\n", __func__, ret);
da850_vpif_init();
@@ -1573,13 +1559,11 @@ static __init void da850_evm_init(void)
ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
if (ret)
pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
ret);
pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
if (ret)
pr_warning("da850_evm_init: sata registration failed: %d\n",
ret);
pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
da850_evm_setup_mac_addr();
}

30
arch/arm/mach-davinci/board-omapl138-hawk.c
View File

@@ -48,8 +48,7 @@ static __init void omapl138_hawk_config_emac(void)
val &= ~BIT(8);
ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
if (ret) {
pr_warning("%s: cpgmac/mii mux setup failed: %d\n",
__func__, ret);
pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
return;
}
@@ -61,8 +60,7 @@ static __init void omapl138_hawk_config_emac(void)
ret = da8xx_register_emac();
if (ret)
pr_warning("%s: emac registration failed: %d\n",
__func__, ret);
pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
}
/*
@@ -147,15 +145,14 @@ static __init void omapl138_hawk_mmc_init(void)
ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
if (ret) {
pr_warning("%s: MMC/SD0 mux setup failed: %d\n",
__func__, ret);
pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
return;
}
ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
GPIOF_DIR_IN, "MMC CD");
if (ret < 0) {
pr_warning("%s: can not open GPIO %d\n",
pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_HAWK_MMCSD_CD_PIN);
return;
}
@@ -163,15 +160,14 @@ static __init void omapl138_hawk_mmc_init(void)
ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
GPIOF_DIR_IN, "MMC WP");
if (ret < 0) {
pr_warning("%s: can not open GPIO %d\n",
pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_HAWK_MMCSD_WP_PIN);
goto mmc_setup_wp_fail;
}
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret) {
pr_warning("%s: MMC/SD0 registration failed: %d\n",
__func__, ret);
pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
goto mmc_setup_mmcsd_fail;
}
@@ -250,8 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
if (ret) {
pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
__func__, ret);
pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
@@ -280,8 +275,7 @@ static __init void omapl138_hawk_usb_init(void)
ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
if (ret) {
pr_warning("%s: USB 1.1 registration failed: %d\n",
__func__, ret);
pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
goto usb11_setup_fail;
}
@@ -307,8 +301,7 @@ static __init void omapl138_hawk_init(void)
ret = da850_register_edma(da850_edma_rsv);
if (ret)
pr_warning("%s: EDMA registration failed: %d\n",
__func__, ret);
pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
omapl138_hawk_mmc_init();
@@ -316,9 +309,8 @@ static __init void omapl138_hawk_init(void)
ret = da8xx_register_watchdog();
if (ret)
pr_warning("omapl138_hawk_init: "
"watchdog registration failed: %d\n",
ret);
pr_warn("%s: watchdog registration failed: %d\n",
__func__, ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE

43
arch/arm/mach-omap1/board-nokia770.c
View File

@@ -7,6 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -23,6 +24,8 @@
#include <linux/platform_data/keypad-omap.h>
#include <linux/platform_data/lcd-mipid.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/i2c-cbus-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -212,6 +215,45 @@ static inline void nokia770_mmc_init(void)
}
#endif
#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
static struct i2c_cbus_platform_data nokia770_cbus_data = {
.clk_gpio = OMAP_MPUIO(9),
.dat_gpio = OMAP_MPUIO(10),
.sel_gpio = OMAP_MPUIO(11),
};
static struct platform_device nokia770_cbus_device = {
.name = "i2c-cbus-gpio",
.id = 2,
.dev = {
.platform_data = &nokia770_cbus_data,
},
};
static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
{
I2C_BOARD_INFO("retu-mfd", 0x01),
},
};
static void __init nokia770_cbus_init(void)
{
const int retu_irq_gpio = 62;
if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
return;
irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
i2c_register_board_info(2, nokia770_i2c_board_info_2,
ARRAY_SIZE(nokia770_i2c_board_info_2));
platform_device_register(&nokia770_cbus_device);
}
#else /* CONFIG_I2C_CBUS_GPIO */
static void __init nokia770_cbus_init(void)
{
}
#endif /* CONFIG_I2C_CBUS_GPIO */
static void __init omap_nokia770_init(void)
{
/* On Nokia 770, the SleepX signal is masked with an
@@ -233,6 +275,7 @@ static void __init omap_nokia770_init(void)
mipid_dev_init();
omap1_usb_init(&nokia770_usb_config);
nokia770_mmc_init();
nokia770_cbus_init();
}
MACHINE_START(NOKIA770, "Nokia 770")

6
arch/arm/mach-omap2/Kconfig
View File

@@ -188,12 +188,6 @@ config MACH_OMAP_H4
select OMAP_DEBUG_DEVICES
select OMAP_PACKAGE_ZAF
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
depends on SOC_OMAP2420
default y
select OMAP_PACKAGE_ZAC
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
depends on SOC_OMAP2430

Some files were not shown because too many files have changed in this diff Show More