mirror of
https://github.com/Dasharo/linux.git
synced 2026-03-06 15:25:10 -08:00
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann: "There is a fairly large number of bug fixes for Qualcomm platforms, most of them addressing issues with the devicetree files for the newly added Snapdragon X1 based laptops to make them more reliable. The Qualcomm driver changes address a few build-time issues as well as runtime problems in the tzmem and scm firmware, the USB Type-C driver, and the cmd-db and pmic_glink soc drivers. The NXP i.MX usually gets a bunch of devicetree fixes that is proportional to the number of supported machines. This includes both warning fixes and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms, as well as a single fix for a 32-bit i.MX6 based board. The other changes are the usual minor changes, including an update to the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v)" * tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits) firmware: microchip: fix incorrect error report of programming:timeout on success soc: qcom: pd-mapper: Fix singleton refcount firmware: qcom: tzmem: disable sdm670 platform soc: qcom: pmic_glink: Actually communicate when remote goes down usb: typec: ucsi: Move unregister out of atomic section soc: qcom: pmic_glink: Fix race during initialization firmware: qcom: qseecom: remove unused functions firmware: qcom: tzmem: fix virtual-to-physical address conversion firmware: qcom: scm: Mark get_wq_ctx() as atomic call arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt arm64: dts: qcom: disable GPU on x1e80100 by default arm64: dts: imx8mm-phygate: fix typo pinctrcl-0 arm64: dts: imx95: correct L3Cache cache-sets arm64: dts: imx95: correct a55 power-domains arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design arm64: dts: imx93: update default value for snps,clk-csr arm64: dts: freescale: tqma9352: Fix watchdog reset arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962 ...
This commit is contained in:
Linus Torvalds
2
.mailmap
2
.mailmap
@@ -354,6 +354,8 @@ Kenneth Westfield <quic_kwestfie@quicinc.com> <kwestfie@codeaurora.org>
|
||||
Kiran Gunda <quic_kgunda@quicinc.com> <kgunda@codeaurora.org>
|
||||
Kirill Tkhai <tkhai@ya.ru> <ktkhai@virtuozzo.com>
|
||||
Kishon Vijay Abraham I <kishon@kernel.org> <kishon@ti.com>
|
||||
Konrad Dybcio <konradybcio@kernel.org> <konrad.dybcio@linaro.org>
|
||||
Konrad Dybcio <konradybcio@kernel.org> <konrad.dybcio@somainline.org>
|
||||
Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
|
||||
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
|
||||
Koushik <raghavendra.koushik@neterion.com>
|
||||
|
||||
@@ -2539,8 +2539,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
W: http://www.linux4sam.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git
|
||||
F: arch/arm/boot/dts/microchip/at91*
|
||||
F: arch/arm/boot/dts/microchip/sama*
|
||||
F: arch/arm/boot/dts/microchip/
|
||||
F: arch/arm/include/debug/at91.S
|
||||
F: arch/arm/mach-at91/
|
||||
F: drivers/memory/atmel*
|
||||
@@ -2749,7 +2748,7 @@ F: include/linux/soc/qcom/
|
||||
|
||||
ARM/QUALCOMM SUPPORT
|
||||
M: Bjorn Andersson <andersson@kernel.org>
|
||||
M: Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
M: Konrad Dybcio <konradybcio@kernel.org>
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
S: Maintained
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
|
||||
@@ -7112,7 +7111,7 @@ F: drivers/gpu/drm/tiny/panel-mipi-dbi.c
|
||||
DRM DRIVER for Qualcomm Adreno GPUs
|
||||
M: Rob Clark <robdclark@gmail.com>
|
||||
R: Sean Paul <sean@poorly.run>
|
||||
R: Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
R: Konrad Dybcio <konradybcio@kernel.org>
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
L: freedreno@lists.freedesktop.org
|
||||
@@ -18800,7 +18799,7 @@ F: include/uapi/drm/qaic_accel.h
|
||||
|
||||
QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER
|
||||
M: Bjorn Andersson <andersson@kernel.org>
|
||||
M: Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
M: Konrad Dybcio <konradybcio@kernel.org>
|
||||
L: linux-pm@vger.kernel.org
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
S: Maintained
|
||||
|
||||
@@ -274,24 +274,24 @@
|
||||
|
||||
led@0 {
|
||||
chan-name = "R";
|
||||
led-cur = /bits/ 8 <0x20>;
|
||||
max-cur = /bits/ 8 <0x60>;
|
||||
led-cur = /bits/ 8 <0x6e>;
|
||||
max-cur = /bits/ 8 <0xc8>;
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
chan-name = "G";
|
||||
led-cur = /bits/ 8 <0x20>;
|
||||
max-cur = /bits/ 8 <0x60>;
|
||||
led-cur = /bits/ 8 <0xbe>;
|
||||
max-cur = /bits/ 8 <0xc8>;
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
chan-name = "B";
|
||||
led-cur = /bits/ 8 <0x20>;
|
||||
max-cur = /bits/ 8 <0x60>;
|
||||
led-cur = /bits/ 8 <0xbe>;
|
||||
max-cur = /bits/ 8 <0xc8>;
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
@@ -781,7 +781,7 @@
|
||||
|
||||
mount-matrix = "-1", "0", "0",
|
||||
"0", "1", "0",
|
||||
"0", "0", "1";
|
||||
"0", "0", "-1";
|
||||
};
|
||||
|
||||
cam1: camera@3e {
|
||||
|
||||
@@ -175,7 +175,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster-thermal {
|
||||
cluster-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 1>;
|
||||
|
||||
@@ -214,7 +214,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster-thermal {
|
||||
cluster-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 3>;
|
||||
|
||||
@@ -182,7 +182,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster-thermal {
|
||||
cluster-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 3>;
|
||||
|
||||
@@ -131,7 +131,7 @@
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
core-cluster-thermal {
|
||||
cluster-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 0>;
|
||||
|
||||
@@ -122,7 +122,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster1-thermal {
|
||||
cluster1-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 4>;
|
||||
@@ -151,7 +151,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster2-thermal {
|
||||
cluster2-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 5>;
|
||||
@@ -180,7 +180,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster3-thermal {
|
||||
cluster3-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 6>;
|
||||
@@ -209,7 +209,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
core-cluster4-thermal {
|
||||
cluster4-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 7>;
|
||||
|
||||
@@ -492,7 +492,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
ddr-cluster5-thermal {
|
||||
ddr-ctrl5-thermal {
|
||||
polling-delay-passive = <1000>;
|
||||
polling-delay = <5000>;
|
||||
thermal-sensors = <&tmu 1>;
|
||||
|
||||
@@ -21,7 +21,7 @@
|
||||
|
||||
&gpio3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrcl-0 = <&pinctrl_gpio3_hog>;
|
||||
pinctrl-0 = <&pinctrl_gpio3_hog>;
|
||||
|
||||
uart4_rs485_en {
|
||||
gpio-hog;
|
||||
|
||||
@@ -22,7 +22,7 @@
|
||||
|
||||
&gpio3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrcl-0 = <&pinctrl_gpio3_hog>;
|
||||
pinctrl-0 = <&pinctrl_gpio3_hog>;
|
||||
|
||||
uart4_rs485_en {
|
||||
gpio-hog;
|
||||
|
||||
@@ -211,13 +211,12 @@
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai3>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&wm8962>;
|
||||
clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -507,10 +506,9 @@
|
||||
&sai3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sai3>;
|
||||
assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
|
||||
<&clk IMX8MP_AUDIO_PLL2> ;
|
||||
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
|
||||
assigned-clock-rates = <12288000>, <361267200>;
|
||||
assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
|
||||
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
fsl,sai-mclk-direction-output;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -499,7 +499,7 @@
|
||||
pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
|
||||
cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
bus-width = <4>;
|
||||
no-sdio;
|
||||
|
||||
@@ -19,7 +19,7 @@
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
alloc-ranges = <0 0x60000000 0 0x40000000>;
|
||||
alloc-ranges = <0 0x80000000 0 0x40000000>;
|
||||
size = <0 0x10000000>;
|
||||
linux,cma-default;
|
||||
};
|
||||
@@ -156,6 +156,7 @@
|
||||
&wdog3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,ext-reset-output;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -1105,7 +1105,7 @@
|
||||
<&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
|
||||
assigned-clock-rates = <100000000>, <250000000>;
|
||||
intf_mode = <&wakeupmix_gpr 0x28>;
|
||||
snps,clk-csr = <0>;
|
||||
snps,clk-csr = <6>;
|
||||
nvmem-cells = <ð_mac2>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
status = "disabled";
|
||||
|
||||
@@ -27,7 +27,7 @@
|
||||
reg = <0x0>;
|
||||
enable-method = "psci";
|
||||
#cooling-cells = <2>;
|
||||
power-domains = <&scmi_devpd IMX95_PERF_A55>;
|
||||
power-domains = <&scmi_perf IMX95_PERF_A55>;
|
||||
power-domain-names = "perf";
|
||||
i-cache-size = <32768>;
|
||||
i-cache-line-size = <64>;
|
||||
@@ -44,7 +44,7 @@
|
||||
reg = <0x100>;
|
||||
enable-method = "psci";
|
||||
#cooling-cells = <2>;
|
||||
power-domains = <&scmi_devpd IMX95_PERF_A55>;
|
||||
power-domains = <&scmi_perf IMX95_PERF_A55>;
|
||||
power-domain-names = "perf";
|
||||
i-cache-size = <32768>;
|
||||
i-cache-line-size = <64>;
|
||||
@@ -61,7 +61,7 @@
|
||||
reg = <0x200>;
|
||||
enable-method = "psci";
|
||||
#cooling-cells = <2>;
|
||||
power-domains = <&scmi_devpd IMX95_PERF_A55>;
|
||||
power-domains = <&scmi_perf IMX95_PERF_A55>;
|
||||
power-domain-names = "perf";
|
||||
i-cache-size = <32768>;
|
||||
i-cache-line-size = <64>;
|
||||
@@ -78,7 +78,7 @@
|
||||
reg = <0x300>;
|
||||
enable-method = "psci";
|
||||
#cooling-cells = <2>;
|
||||
power-domains = <&scmi_devpd IMX95_PERF_A55>;
|
||||
power-domains = <&scmi_perf IMX95_PERF_A55>;
|
||||
power-domain-names = "perf";
|
||||
i-cache-size = <32768>;
|
||||
i-cache-line-size = <64>;
|
||||
@@ -93,7 +93,7 @@
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x400>;
|
||||
power-domains = <&scmi_devpd IMX95_PERF_A55>;
|
||||
power-domains = <&scmi_perf IMX95_PERF_A55>;
|
||||
power-domain-names = "perf";
|
||||
enable-method = "psci";
|
||||
#cooling-cells = <2>;
|
||||
@@ -110,7 +110,7 @@
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x500>;
|
||||
power-domains = <&scmi_devpd IMX95_PERF_A55>;
|
||||
power-domains = <&scmi_perf IMX95_PERF_A55>;
|
||||
power-domain-names = "perf";
|
||||
enable-method = "psci";
|
||||
#cooling-cells = <2>;
|
||||
@@ -187,7 +187,7 @@
|
||||
compatible = "cache";
|
||||
cache-size = <524288>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <1024>;
|
||||
cache-sets = <512>;
|
||||
cache-level = <3>;
|
||||
cache-unified;
|
||||
};
|
||||
|
||||
@@ -320,8 +320,8 @@
|
||||
reg = <0x08af8800 0x400>;
|
||||
|
||||
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>,
|
||||
<GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>;
|
||||
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "pwr_event",
|
||||
"dp_hs_phy_irq",
|
||||
"dm_hs_phy_irq";
|
||||
|
||||
@@ -278,6 +278,13 @@
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
|
||||
vreg_l3i_0p8: ldo3 {
|
||||
regulator-name = "vreg_l3i_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-7 {
|
||||
@@ -423,11 +430,17 @@
|
||||
};
|
||||
|
||||
&pcie4 {
|
||||
perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-0 = <&pcie4_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie4_phy {
|
||||
vdda-phy-supply = <&vreg_l3j_0p8>;
|
||||
vdda-phy-supply = <&vreg_l3i_0p8>;
|
||||
vdda-pll-supply = <&vreg_l3e_1p2>;
|
||||
|
||||
status = "okay";
|
||||
@@ -517,7 +530,30 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pcie6a_default: pcie2a-default-state {
|
||||
pcie4_default: pcie4-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio147";
|
||||
function = "pcie4_clk";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
perst-n-pins {
|
||||
pins = "gpio146";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio148";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
pcie6a_default: pcie6a-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio153";
|
||||
function = "pcie6a_clk";
|
||||
@@ -529,7 +565,7 @@
|
||||
pins = "gpio152";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
|
||||
@@ -268,7 +268,6 @@
|
||||
pinctrl-0 = <&edp_reg_en>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
@@ -637,6 +636,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
@@ -724,9 +731,13 @@
|
||||
|
||||
aux-bus {
|
||||
panel {
|
||||
compatible = "edp-panel";
|
||||
compatible = "samsung,atna45af01", "samsung,atna33xc20";
|
||||
enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&vreg_edp_3p3>;
|
||||
|
||||
pinctrl-0 = <&edp_bl_en>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
edp_panel_in: endpoint {
|
||||
remote-endpoint = <&mdss_dp3_out>;
|
||||
@@ -756,11 +767,17 @@
|
||||
};
|
||||
|
||||
&pcie4 {
|
||||
perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-0 = <&pcie4_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie4_phy {
|
||||
vdda-phy-supply = <&vreg_l3j_0p8>;
|
||||
vdda-phy-supply = <&vreg_l3i_0p8>;
|
||||
vdda-pll-supply = <&vreg_l3e_1p2>;
|
||||
|
||||
status = "okay";
|
||||
@@ -785,6 +802,16 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmc8380_3_gpios {
|
||||
edp_bl_en: edp-bl-en-state {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
power-source = <1>; /* 1.8V */
|
||||
input-disable;
|
||||
output-enable;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -931,7 +958,30 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pcie6a_default: pcie2a-default-state {
|
||||
pcie4_default: pcie4-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio147";
|
||||
function = "pcie4_clk";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
perst-n-pins {
|
||||
pins = "gpio146";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio148";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
pcie6a_default: pcie6a-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio153";
|
||||
function = "pcie6a_clk";
|
||||
@@ -943,15 +993,15 @@
|
||||
pins = "gpio152";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio154";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
pins = "gpio154";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
tpad_default: tpad-default-state {
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user