dasharo/docs
0
0
Fork 0
mirror of https://github.com/Dasharo/docs.git synced 2026-06-13 10:16:57 -07:00
Code Issues Packages Projects Releases Wiki Activity

dasharo-compatibility/S30-fan-speed.md: rename and update file

Browse Source 
Signed-off-by: Kamil Pokornicki <kamil.pokornicki@3mdeb.com>
Signed-off-by: Przemyslaw Sulewski <przemyslaw.sulewski@3mdeb.com>
This commit is contained in:
Kamil Pokornicki
2022-12-30 09:43:46 +01:00
committed by Przemyslaw Sulewski
parent 5ee751f204
commit b798315aad
3 changed files with 104 additions and 111 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/unified-test-documentation/dasharo-compatibility/S30-fan-control.md
-110
View File
@@ -1,110 +0,0 @@
# Dasharo Compatibility: custom fan curve
## FAN001.001 Custom fan curve: CPU fan
**Test description**
The fan has been configured to follow a custom curve. This test aims to verify
that the fan curve is configured correctly and the fan spins up and down
according to the defined values.
**Test configuration data**
1. `FIRMWARE` = Dasharo
**Test setup**
1. Proceed with the
[Generic test setup: firmware](../../generic-test-setup/#firmware).
1. Proceed with the
[Generic test setup: OS installer](../../generic-test-setup/#os-installer).
1. Proceed with the
[Generic test setup: OS installation](../../generic-test-setup/#os-installation).
1. Proceed with the
[Generic test setup: OS boot from disk](../../generic-test-setup/#os-boot-from-disk).
1. Install `lm-sensors` and `stress-ng` on the DUT.
**Test steps**
1. Power on the DUT.
1. Boot into the system.
1. Log into the system by using the proper login and password.
1. Open the terminal window and execute the following command:
```bash
sensors | grep 'Package id 0'
```
1. Verify using `sensors` that the temperature is below 40°C
1. If the temperature is above 40, enable fan turbo mode (Fn + 1) until it cools
down
1. Flip the laptop over and check if the CPU fan (located under the Backspace
key) is spinning
1. In the terminal window, run following command:
```bash
stress-ng -c 8
```
1. Verify using `sensors` that the temperature increases above 40
1. Flip the laptop over and check if the CPU fan is spinning
**Expected result**
1. The fan should not be spinning while the temperature is below 40 degrees
1. The fan should be spinning while the temperature is above 40 degrees
## FAN002.001 Custom fan curve: GPU fan (NV41MB)
**Test description**
The fan has been configured to follow a custom curve. This test aims to verify
that the fan curve is configured correctly and the fan spins up and down
according to the defined values.
**Test configuration data**
1. `FIRMWARE` = Dasharo
1. `BOOT_MENU_KEY` = `F7`
**Test setup**
1. Proceed with the
[Generic test setup: firmware](../../generic-test-setup/#firmware).
1. Proceed with the
[Generic test setup: OS installer](../../generic-test-setup/#os-installer).
1. Proceed with the
[Generic test setup: OS installation](../../generic-test-setup/#os-installation).
1. Proceed with the
[Generic test setup: OS boot from disk](../../generic-test-setup/#os-boot-from-disk).
1. Install `nvidia-smi` and `mesa-utils` on the DUT.
**Test steps**
1. Power on the DUT.
1. Boot into the system.
1. Log into the system by using the proper login and password.
1. Open the terminal window and execute the following command:
```bash
watch -n1 nvidia-smi
```
1. Verify using that the temperature is below 40°C
1. If the temperature is above 40, enable fan turbo mode (Fn + 1) until it cools
down
1. Flip the laptop over and check if the GPU fan (located under the Escape
key) is spinning
1. In another terminal window, run following command:
```bash
_NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia __GL_SYNC_TO_VBLANK=0 glxgears
```
1. Verify that the temperature increases above 40
1. Flip the laptop over and check if the GPU fan is spinning
**Expected result**
1. The fan should not be spinning while the temperature is below 40 degrees
1. The fan should be spinning while the temperature is above 40 degrees
docs/unified-test-documentation/dasharo-compatibility/S30-fan-speed.md
+102
View File
@@ -0,0 +1,102 @@
# Dasharo Compatibility: Fan speed
## Test cases common documentation
**Test setup**
1. Proceed with the
[Generic test setup: firmware](../../generic-test-setup/#firmware).
1. Proceed with the
[Generic test setup: OS installer](../../generic-test-setup/#os-installer).
1. Proceed with the
[Generic test setup: OS installation](../../generic-test-setup/#os-installation).
1. Proceed with the
[Generic test setup: OS boot from disk](../../generic-test-setup/#os-boot-from-disk).
## FAN001.001 CPU fan
**Test description**
This test aims to verify that the CPU fan RPM value is available to read.
**Test configuration data**
1. `FIRMWARE` = Dasharo
**Test setup**
1. Proceed with the
[Test cases common documentation](#test-cases-common-documentation) section.
1. Install `lm-sensors` on the DUT.
**Test steps**
1. Power on the DUT.
1. Boot into the system.
1. Log into the system by using the proper login and password.
1. In the terminal window run the following command to get the RPM value of the
CPU fan:
```bash
sensors | grep "CPU fan"
```
1. Note the results.
**Expected result**
The CPU fan RPM value is displayed and isn't zero.
Example output:
```bash
CPU fan: 4347 RPM
```
## FAN002.001 GPU fan
**Test description**
The fan has been configured to follow a custom curve. This test aims to verify
that the fan curve is configured correctly and the fan spins up and down
according to the defined values.
**Test configuration data**
1. `FIRMWARE` = Dasharo
**Test setup**
1. Proceed with the
[Test cases common documentation](#test-cases-common-documentation) section.
1. Install `nvidia-smi` and `mesa-utils` on the DUT.
**Test steps**
1. Power on the DUT.
1. Boot into the system.
1. Log into the system by using the proper login and password.
1. Open the terminal window and execute the following command:
```bash
watch -n1 nvidia-smi
```
1. Verify using that the temperature is below 40°C.
1. If the temperature is above 40, enable the fan turbo mode (Fn + 1) until it
cools down.
1. Flip the laptop over and check if the GPU fan (located under the Escape
key) is spinning.
1. In another terminal window, run the following command:
```bash
_NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia __GL_SYNC_TO_VBLANK=0 glxgears
```
1. Verify that the temperature increases above 40.
1. Flip the laptop over and check if the GPU fan is spinning.
**Expected result**
1. The fan should not be spinning while the temperature is below 40 degrees.
1. The fan should be spinning while the temperature is above 40 degrees.
mkdocs.yml
+2 -1
View File
@@ -281,7 +281,7 @@ nav:
- 'USB detection': unified-test-documentation/dasharo-compatibility/31O-usb-detect.md
- 'USB booting': unified-test-documentation/dasharo-compatibility/31N-usb-boot.md
- 'coreboot Fan control': unified-test-documentation/dasharo-compatibility/S31-coreboot-fan-control.md
- 'Custom Fan Curve': unified-test-documentation/dasharo-compatibility/S30-fan-control.md
- 'Fan speed': unified-test-documentation/dasharo-compatibility/S30-fan-speed.md
- 'Embedded Controller and Super I/O initialization ': unified-test-documentation/dasharo-compatibility/31G-ec-and-superio.md
- 'Nvidia Graphics support': unified-test-documentation/dasharo-compatibility/319-nvidia-graphics.md
- 'Flash write protection': unified-test-documentation/dasharo-compatibility/31P-flash-write-protection.md
@@ -315,6 +315,7 @@ nav:
- 'CPU frequency measure': unified-test-documentation/dasharo-performance/402-cpu-frequency.md
- 'Platform stability': unified-test-documentation/dasharo-performance/404-platform-stability.md
- 'Fan control measure': unified-test-documentation/dasharo-performance/405-fan-control-measure.md
- 'Custom fan curve': unified-test-documentation/dasharo-performance/406-custom-fan-curve.md
- 'Roadmap': ecosystem/roadmap.md
- 'Quality Principles': quality-principles/introduction.md
# - 'Introduction':