For the most part readers of cl_cb_state only need a value that is
"eventually" right. And the value is set only either 1) in response to
some change of state, in which case it's set to UNKNOWN and then a
callback rpc is sent to probe the real state, or b) in the handling of a
response to such a callback. UNKNOWN is therefore always a "temporary"
state, and for the other states we're happy to accept last writer wins.
So I think we're OK here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID. In addition, RFC 5661 says:
15.1.16.5. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used. This
error is moot in NFSv4.1 because all operations that take a stateid
MUST be preceded by the SEQUENCE operation, and the earlier server
instance is detected by the session infrastructure that supports
SEQUENCE.
I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery. Bruce suggested an additional test that could be
useful to client developers.
Lastly, RFC 5661, section 18.48.3 has this:
o Special stateids are always considered invalid (they result in the
error code NFS4ERR_BAD_STATEID).
An explicit check is made for those state IDs to avoid printk noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Initiate a CB probe when a new connection with the correct direction is added
to a session (IFF backchannel is marked as down). Without this a
BIND_CONN_TO_SESSION has no effect on the internal backchannel state, which
causes the server to reply to every SEQUENCE op with the
SEQ4_STATUS_CB_PATH_DOWN flag set until DESTROY_SESSION.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull MMC fixes from Chris Ball:
- atmel-mci: Fixes for NULL timer and DMA burst/chunk size
- dw_mmc: Fix DMA ordering, clkdiv calculation, NULL host->data
- mxs_mmc: Compile fix for CONFIG_OF=y && CONFIG_PM=n
- omap: Fix NULL deref in mmc_omap_remove_slot(), reg_shift initialization
- sdhci-s3c: Fix boot regression by adding IRQF_ONESHOT flag
- Small fixes to core/sd, core/sdio, sdhci
* tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: mxs-mmc: Move of_match_table out of CONFIG_PM
mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irq
mmc: core: return an error on suspend if mmc_deselect_cards fails
mmc: omap: Fix broken reg_shift initialization
mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails
mmc: omap: Fix a section warning regression
mmc: dw_mmc: correct the calculation for CLKDIV
mmc: dw_mmc: fix incorrect setting of host->data of NULL
mmc: dw_mmc: fix the IDMAC sw reset
mmc: dw_mmc: fix the transmission handling in IDMAC
mmc: sdio: fix setting card data bus width as 4-bit
mmc: atmel-mci: fix burst/chunk size modification
mmc: atmel-mci: fix data timeout issue
mmc: sdhci: Use DBG() instead of pr_warning() on large timeout
Pull remoteproc fixes from Ohad Ben-Cohen:
"A few relatively-small remoteproc fixes for 3.5: two error path fixes,
and one -Wformat warning fix."
* tag 'rproc-fixes-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc/omap: fix dev_err typo
remoteproc: fix missing fault indication in error-path
remoteproc: fix print format warnings
Pull hwmon subsystem fixes from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (coretemp) Drop needless initialization
hwmon: (coretemp) Document TjMax for 3rd generation i5/i7 processors
hwmon: (coretemp) Improve support for TjMax detection on Atom CPUs
hwmon: (coretemp) Add support for Atom D2000 and N2000 series CPU models
hwmon: (coretemp) Improve support of recent Atom CPU models
The asm-generic/bug.h __ASSEMBLY__ guarding is completely bogus, which
tripped up the powerpc build when the kernel.h include was added:
In file included from include/asm-generic/bug.h:5:0,
from arch/powerpc/include/asm/bug.h:127,
from arch/powerpc/kernel/head_64.S:31:
include/linux/kernel.h:44:0: warning: "ALIGN" redefined [enabled by default]
include/linux/linkage.h:57:0: note: this is the location of the previous definition
include/linux/sysinfo.h: Assembler messages:
include/linux/sysinfo.h:7: Error: Unrecognized opcode: `struct'
include/linux/sysinfo.h:8: Error: Unrecognized opcode: `__kernel_long_t'
Moving the __ASSEMBLY__ guard up and stashing the kernel.h include under
it fixes this up, as well as covering the case the original fix was
attempting to handle.
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the READABLE_ASM cc-option tests were added they were done so prior
to the arch Makefile include, resulting in cc-option being run on the
host cc instead of the factoring in the cross prefix set up by the
architecture.
This bumps the include back up so that cc-option actually runs on the
compiler that we're building with.
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge hfsplus fixes from Christoph Hellwig:
"Two small hfsplus fixes:
- a one liner regression fix for large volume handling from Janne
Kalliomäki.
- a fixup for the boot image blessing feature to make it work with
the fake "hardlinks" in hfsplus from Matthew Garrett."
* branch 'hfsplus':
hfsplus: fix bless ioctl when used with hardlinks
hfsplus: fix overflow in sector calculations in hfsplus_submit_bio
HFS+ doesn't really implement hard links - instead, hardlinks are indicated
by a magic file type which refers to an indirect node in a hidden
directory. The spec indicates that stat() should return the inode number
of the indirect node, but it turns out that this doesn't satisfy the
firmware when it's looking for a bootloader - it wants the catalog ID of
the hardlink file instead. Fix up this case.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable io_size was unsigned int, which caused the wrong sector number
to be calculated after aligning it. This then caused mount to fail with big
volumes, as backup volume header information was searched from a
wrong sector.
Signed-off-by: Janne Kalliomäki <janne@tuxera.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Atom CPUs don't have a register to retrieve TjMax. Detection so far was
incomplete. Use the X86 model ID to improve it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Pull drm fixes from Dave Airlie:
"Radeon is most of the work, one regression, one BUG fix in the new
prime code, some fixes to init code to make streamout not lock up the
hardware, and just some code to enable users to test HDMI audio on
later hw (its off by default).
Intel adds edp edid caching for some strange Dell Vostros that black
screen on startup if keep reading their EDID, and a fix for a DP
regression.
Otherwise fix for via/sis and one to stop udl binding to multiple
non-video usb."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: cache the EDID for eDP panels
Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"
drm/i915: eDP aux needs vdd
drm/i915: don't enumerate HDMID if an eDP panel is already active on the port
drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xx
drm/radeon: add some additional 6xx/7xx/EG register init
drm/radeon: enable HDMI on DCE5 (AKA NI excluding Aruba)
drm sis: initialize object_idr
drm via: initialize object_idr
drm/radeon/prime: reserve/unreserve around pin
drm/radeon: fix regression in dynpm due to multi-ring rework
vga_switcheroo.h: fix pci_dev warning
drm/udl: only bind to the video devices on the hub.
For some reason one of the dev_err invocations is using a wrong
device so fix that.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable@vger.kernel.org
Pull ARM SoC fixes from Olof Johansson:
"A bit larger set than usual, unfortunately -- I've been sitting on
them longer than I meant to so it's really more like 2 -rc pull
requests in one, volume-wise.
Nearly everything is fixes for fallout from the merge window, or other
fixes for bugs. The one exception is the highbank L2-enablement
patch, but it was contained enough that I picked it up anyway:
- i.MX fixes, mostly for clock and pinctrl changes
- OMAP fixes, mostly PM-related
- A patch to enable L2 on highbank
- A couple of fixes for PXA, Kirkwood, Versatile"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
ARM: Kirkwood: Fix clk problems modular ethernet driver
arm: versatile: fix and enable PCI I/O space
ARM: highbank: Add smc calls to enable/disable the L2
ARM i.MX imx21ads: Fix overlapping static i/o mappings
ARM: imx6: exit coherency when shutting down a cpu
ARM: mx51: Add pinctrl_provide_dummies()
ARM: mx31: Add pinctrl_provide_dummies()
ARM: OMAP2+: Fix compile for CONFIG_TIDSPBRIDGE platform init code
ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not set
ARM: OMAP: Fix MMC_OMAP build when only MMC_OMAP_HS is selected
OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup
ARM: mmp: fix missing cascade_irq in irq handler
ARM: dts: update memory size on brownstone
ARM i.MX27 Visstrim M10: fix gpio handling.
ARM i.MX53: Fix PLL4 base address
ARM i.MX pllv2: make round_rate accurate
ARM i.MX pllv2: use standard register set unconditionally
ARM: OMAP: Fix lis3lv02d accelerometer to use gpio_to_irq
ARM: imx: only call l2x0_init if it's available
ARM: imx: only specify i2c device type once
...
When the ethernet driver was built as a module, it would lock the
machine when loaded. At boot the ethernet clks are unused, so get
turned off. Later, when the module is loaded, the probe function
would access the hardware before the clock was restarted, and the
machine would lock. It has also been determined that when the clk is
turned off, the interface forgets its MAC address, which for most
systems, is set by the boot loader.
When the machine setup file creates a platform device for the
interface, prepare and enable the clock for the interface. This will
ensure it is not turned off. However, if the setup file only
instantiates one platform device, the other will have its clk
disabled, thus maybe saving a little power.
Report-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With commit 4d5fc58dbe (ARM: remove bunch of now unused
mach/io.h files), the I/O space setup was completely broken on
versatile. This patch fixes that and prepares for further
I/O space clean-up.
I/O space handling on the versatile platform is currently
broken in multiple ways. Most importantly, the ports do
not get mapped into the virtual address space at all.
Also, there is some amount of confusion between PCI I/O
space and other statically mapped MMIO registers in the
platform code:
* The __io_address() macro that is used to access the
platform register maps to the same __io macro that gets
used for I/O space.
* The IO_SPACE_LIMIT is set to a value that is much larger
than the total available space.
* The I/O resource of the PCI bus is set to the physical
address of the mapping, which is way outside of the
actual I/O space limit as well as the address range that
gets decoded by traditional PCI cards.
* No attempt is made to stay outside of the ISA port range
that some device drivers try access.
* No resource gets requested as a child of ioport_resource,
but an IORESOURCE_IO type mapping gets requested
as a child of iomem_resource.
This patch attempts to correct all of the above. This makes
it possible to use virtio-pci based virtual devices as well
as actual PCI cards including those with legacy ISA port
ranges like VGA.
Some of the issues seem to be duplicated on other platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[rob: update to 3.5-rc2 and io.h cleanup related changes]
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull btrfs compile warning fixes from Chris Mason.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: cast devid to unsigned long long for printk %llu
Btrfs: init old_generation in get_old_root
Pull arch/tile update from Chris Metcalf:
"This one-line bug fix unbreaks glibc robust mutexes (among other
things no doubt), from code merged in during the 3.5 merge window but
which we had been running internally at Tilera for almost a year."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: fix bug in get_user() for 4-byte values
