Move this out of nouveau directory. As we start to add more encoder
slaves used by other drivers, it makes sense to put the Kconfig bits in
one place.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex writes:
- CS ioctl cleanup and unification. Unification of a lot of functionality
that was duplicated across multiple generates of hardware.
- Add support for Oland GPUs
- Deprecate UMS support. Mesa and the ddx dropped support for UMS and
apparently very few people still use it since the UMS CS ioctl was broken
for several kernels and no one reported it. It was fixed in 3.8/stable.
- Rework GPU reset. Use the status registers to determine what blocks
to reset. This better matches the recommended reset programming model.
This also allows us to properly reset blocks besides GFX and DMA.
- Switch the VM set page code to use an IB rather than the ring. This
fixes overflow issues when doing large page table updates using a small
ring like DMA.
- Several small cleanups and bug fixes.
* 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux: (38 commits)
drm/radeon/dce6: fix display powergating
drm/radeon: add Oland pci ids
drm/radeon: radeon-asic updates for Oland
drm/radeon: add ucode loading support for Oland
drm/radeon: fill in gpu init for Oland
drm/radeon: add Oland chip family
drm/radeon: switch back to using the DMA ring for VM PT updates
drm/radeon: use IBs for VM page table updates v2
drm/radeon: don't reset the MC on IGPs/APUs
drm/radeon: use the reset mask to determine if rings are hung
drm/radeon: halt engines before disabling MC (si)
drm/radeon: halt engines before disabling MC (cayman/TN)
drm/radeon: halt engines before disabling MC (evergreen)
drm/radeon: halt engines before disabling MC (6xx/7xx)
drm/radeon: use status regs to determine what to reset (si)
drm/radeon: use status regs to determine what to reset (cayman)
drm/radeon: use status regs to determine what to reset (evergreen)
drm/radeon: use status regs to determine what to reset (6xx/7xx)
drm/radeon: rework GPU reset on cayman/TN
drm/radeon: rework GPU reset on cayman/TN
...
videomode helpers for of + devicetree stuff, required for new kms drivers
(not the fbdev maintainer).
* tag 'of_videomode_helper' of git://git.pengutronix.de/git/str/linux:
drm_modes: add of_videomode helpers
drm_modes: add videomode helpers
fbmon: add of_videomode helpers
fbmon: add videomode helpers
video: add of helper for display timings/videomode
video: add display_timing and videomode
viafb: rename display_timing to via_display_timing
Fixes for usb/udl devices
* udl-fixes:
drm/udl: disable fb_defio by default
drm/udl: Inline memcmp() for RLE compression of xfer
drm/udl: make usage as a console safer
drm/usb: bind driver to correct device
(not the fbcon maintainer pull 2)
fix bug in vgacon on bootup and fbcon losing fonts on startup.
* console-fixes: (50 commits)
fbcon: don't lose the console font across generic->chip driver switch
vgacon/vt: clear buffer attributes when we load a 512 character font (v2)
This pulls in most of Linus tree up to -rc6, this fixes the worst lockdep
reported issues and re-enables fbcon lockdep.
(not the fbcon maintainer)
* 'fbcon-locking-fixes' of ssh://people.freedesktop.org/~airlied/linux: (529 commits)
Revert "Revert "console: implement lockdep support for console_lock""
fbcon: fix locking harder
fb: Yet another band-aid for fixing lockdep mess
fb: rework locking to fix lock ordering on takeover
This reverts commit ff0d05bf73.
Now that we have all the locking fixes in place, we can revert the
revert. This re-enables lockdep tracking for the console lock,
daee779718.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Okay so Alan's patch handled the case where there was no registered fbcon,
however the other path entered in set_con2fb_map pit.
In there we called fbcon_takeover, but we also took the console lock in a couple
of places. So push the console lock out to the callers of set_con2fb_map,
this means fbmem and switcheroo needed to take the lock around the fb notifier
entry points that lead to this.
This should fix the efifb regression seen by Maarten.
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Adjust the console layer to allow a take over call where the caller
already holds the locks. Make the fb layer lock in order.
This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.
[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I've been getting the following warning when doing randbuilds
since forever. Now it finally pissed me off just the perfect
amount so that I can fix it.
arch/x86/kernel/cpu/intel_cacheinfo.c:489:27: warning: ‘cache_disable_0’ defined but not used [-Wunused-variable]
arch/x86/kernel/cpu/intel_cacheinfo.c:491:27: warning: ‘cache_disable_1’ defined but not used [-Wunused-variable] arch/x86/kernel/cpu/intel_cacheinfo.c:524:27: warning: ‘subcaches’ defined but not used [-Wunused-variable]
It happens because in randconfigs where CONFIG_SYSFS is not set,
the whole sysfs-interface to L3 cache index disabling is
remaining unused and gcc correctly warns about it. Make it
optional, depending on CONFIG_SYSFS too, as is the case with
other sysfs-related machinery in this file.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/1359969195-27362-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There seems to be a bad interaction between gem/shmem and defio on top,
I get list corruption on the page lru in the shmem code.
Turn it off for now until we get some more digging done.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
As we use a variable length the compiler does not realise that it is a
fixed value of either 2 or 4 bytes. Instead of performing the inline
comparison itself, the compiler inserts a function call to the generic
memcmp routine which is optimised for long comparisons of variable
length. That turns out to be quite expensive...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel writes:
"Probably the last feature pull for 3.9, there's some fixes outstanding
thought that I'd like to sneak in. And maybe 3.8 takes a bit longer ...
Anyway, highlights of this pull:
- Kill the horrible IS_DISPLAYREG hack to handle the mmio offset movements
on vlv, big thanks to Ville.
- Dynamic power well support for Haswell, shaves away a bit when only
using the eDP port on pipe A (Paulo). Plus unclaimed register fixes
uncovered by this.
- Clarifications of the gpu hang/reset state transitions, hopefully fixing
a few spurious -EIO deaths in userspace.
- Haswell ELD fixes.
- Some more (pp)gtt cleanups from Ben.
- A few smaller things all over.
Plus all the stuff from the previous rather small pull request:
- Broadcast RBG improvements and reduced color range fixes from Ville.
- Ben is on a "kill legacy gtt code for good" spree, first pile of patches
included.
- No-relocs and bo lut improvements for faster execbuf from Chris.
- Some refactorings from Imre."
* tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
GPU/i915: Fix acpi_bus_get_device() check in drivers/gpu/drm/i915/intel_opregion.c
drm/i915: Set the SR01 "screen off" bit in i915_redisable_vga() too
drm/i915: Kill IS_DISPLAYREG()
drm/i915: Introduce i915_vgacntrl_reg()
drm/i915: gen6_gmch_remove can be static
drm/i915: dynamic Haswell display power well support
drm/i915: check the power down well on assert_pipe()
drm/i915: don't send DP "idle" pattern before "normal" on HSW PORT_A
drm/i915: don't run hsw power well code on !hsw
drm/i915: kill cargo-culted locking from power well code
drm/i915: Only run idle processing from i915_gem_retire_requests_worker
drm/i915: Fix CAGF for HSW
drm/i915: Reclaim GTT space for failed PPGTT
drm/i915: remove intel_gtt structure
drm/i915: Add probe and remove to the gtt ops
drm/i915: extract hw ppgtt setup/cleanup code
drm/i915: pte_encode is gen6+
drm/i915: vfuncs for ppgtt
drm/i915: vfuncs for gtt_clear_range/insert_entries
drm/i915: Error state should print /sys/kernel/debug
...
Okay you don't really want to use udl devices as your console, but if
you are unlucky enough to do so, you run into a lot of schedule while atomic
due to printk being called from all sorts of funky places. So check if we
are in an atomic context, and queue the damage for later, the next printk
should cause it to appear. This isn't ideal, but it is simple, and seems to
work okay in my testing here.
(dirty area idea came from xenfb)
fixes a bunch of sleeping while atomic issues running fbcon on udl devices.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
While looking at plymouth on udl I noticed that plymouth was trying
to use its fb plugin not its drm one, it was trying to drmOpen a driver called
usb not udl, noticed that we actually had out driver pointing at the wrong
device.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
If grub2 loads efifb/vesafb, then when systemd starts it can set the console
font on that framebuffer device, however when we then load the native KMS
driver, the first thing it does is tear down the generic framebuffer driver.
The thing is the generic code is doing the right thing, it frees the font
because otherwise it would leak memory. However we can assume that if you
are removing the generic firmware driver (vesa/efi/offb), that a new driver
*should* be loading soon after, so we effectively leak the font.
However the old code left a dangling pointer in vc->vc_font.data and we
can now reuse that dangling pointer to load the font into the new
driver, now that we aren't freeing it.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.
The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.
A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.
v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Only enable it when we disable the display rather than
at DPMS time since enabling it requires a full modeset
to restore the display state. Fixes blank screens in
certain cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pull media fixes from Mauro Carvalho Chehab:
"For a regression fix on a few radio drivers that were preventing radio
TX to work on those devices"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] radio: set vfl_dir correctly to fix modulator regression
Pull USB fixes from Greg Kroah-Hartman:
"Here are a few tiny USB fixes for 3.8-rc6.
Nothing major here, some host controller bug fixes to resolve a number
of bugs that people have reported, and a bunch of additional device
ids are added to a number of drivers (which caused code to be deleted
from the usb-storage driver, always nice)"
* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
USB: storage: optimize to match the Huawei USB storage devices and support new switch command
USB: storage: Define a new macro for USB storage match rules
USB: ftdi_sio: add Zolix FTDI PID
USB: option: add Changhong CH690
USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
USB: add OWL CM-160 support to cp210x driver
USB: EHCI: fix bug in scheduling periodic split transfers
USB: EHCI: fix for leaking isochronous data
USB: option: add support for Telit LE920
USB: qcserial: add Telit Gobi QDL device
USB: EHCI: fix timer bug affecting port resume
USB: UHCI: notify usbcore about port resumes
USB: EHCI: notify usbcore about port resumes
USB: add usb_hcd_{start,end}_port_resume
USB: EHCI: unlink one async QH at a time
USB: EHCI: remove ASS/PSS polling timeout
usb: Using correct way to clear usb3.0 device's remote wakeup feature.
usb: Prevent dead ports when xhci is not enabled
USB: XHCI: fix memory leak of URB-private data
drivers: xhci: fix incorrect bit test
...
Pull DMA mapping fixes from Marek Szyprowski:
"This pull request contains important bugfix patches for 9
architectures, which finally fixes broken allmodconfig builds
introduced in v3.8-rc1. Those architectures don't use dma_map_ops
based implementation and require manual update or additional dummy
implementations of the missing new dma-mapping api functions:
dma_mmap_coherent and dma_get_sgtable."
* 'fixes-for-v3.8-rc7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
xtensa: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
parisc: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
mn10300: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
m68k: Provide dma_mmap_coherent() and dma_get_sgtable()
frv: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
cris: Provide dma_mmap_coherent() and dma_get_sgtable()
c6x: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
blackfin: Provide dma_mmap_coherent() and dma_get_sgtable()
avr32: Provide dma_mmap_coherent() and dma_get_sgtable()
Pull dlm fix from David Teigland:
"Thanks to Jana who reported the problem and was able to test this fix
so quickly."
This fixes an incorrect size check that triggered for CONFIG_COMPAT
whether the code was actually doing compat or not. The incorrect write
size check broke userland (clvmd) when maximum resource name lengths are
used.
* 'fix-max-write' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: check the write size from user
