armbian/linux
0
0
Fork 0
mirror of https://github.com/armbian/linux.git synced 2026-01-06 10:13:00 -08:00
Code Issues Packages Projects Releases Wiki Activity

Merge 3.0-rc2 into usb-linus as it's needed by some USB patches

Browse Source 
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Greg Kroah-Hartman
2011-06-14 06:51:10 -07:00
parent e73a9891b3 2c53b436a3
commit dcc8545790
460 changed files with 5025 additions and 2786 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
CREDITS
View File

@@ -518,6 +518,14 @@ N: Zach Brown
E: zab@zabbo.net
D: maestro pci sound
M: David Brownell
D: Kernel engineer, mentor, and friend. Maintained USB EHCI and
D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
D: device drivers. His encouragement also helped many engineers get
D: started working on the Linux kernel. David passed away in early
D: 2011, and will be greatly missed.
W: https://lkml.org/lkml/2011/4/5/36
N: Gary Brubaker
E: xavyer@ix.netcom.com
D: USB Serial Empeg Empeg-car Mark I/II Driver

2
Documentation/kernel-parameters.txt
View File

@@ -2603,6 +2603,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
than 64 sectors = 32 KB at a time);
n = INITIAL_READ10 (force a retry of the
initial READ(10) command);
o = CAPACITY_OK (accept the capacity
reported by the device);
r = IGNORE_RESIDUE (the device reports

17
MAINTAINERS
View File

@@ -1739,7 +1739,7 @@ S: Supported
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
@@ -4252,8 +4252,7 @@ F: drivers/mmc/
F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
M: David Brownell <dbrownell@users.sourceforge.net>
S: Odd Fixes
S: Orphan
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
@@ -4603,7 +4602,6 @@ F: drivers/media/video/omap3isp/*
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -4947,6 +4945,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi
F: drivers/input/serio/i8042-unicore32io.h
F: drivers/i2c/busses/i2c-puv3.c
F: drivers/video/fb-puv3.c
F: drivers/rtc/rtc-puv3.c
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
@@ -5984,7 +5983,6 @@ F: Documentation/serial/specialix.txt
F: drivers/staging/tty/specialix*
SPI SUBSYSTEM
M: David Brownell <dbrownell@users.sourceforge.net>
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
@@ -6432,9 +6430,8 @@ S: Maintained
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
S: Orphan
F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
@@ -6448,9 +6445,10 @@ S: Maintained
F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
M: David Brownell <dbrownell@users.sourceforge.net>
M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/gadget/
F: include/linux/usb/gadget*
@@ -6492,9 +6490,8 @@ S: Maintained
F: sound/usb/midi.*
USB OHCI DRIVER
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
S: Orphan
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*

18
Makefile
View File

@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 0
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Sneaky Weasel
# *DOCUMENTATION*
@@ -378,7 +378,7 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
@@ -1005,7 +1005,7 @@ endef
define filechk_version.h
(echo \#define LINUX_VERSION_CODE $(shell \
expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
@@ -1110,11 +1110,6 @@ modules_install: _modinst_ _modinst_post
PHONY += _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@@ -1531,12 +1526,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))
# Run depmod only if we have System.map and depmod is executable
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
cmd_depmod = \
if [ -r System.map -a -x $(DEPMOD) ]; then \
$(DEPMOD) -ae -F System.map \
$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
$(KERNELRELEASE); \
fi
cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
# Create temporary dir for module support files
# clean it up only when building all modules

6
arch/arm/mach-ep93xx/core.c
View File

@@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
}
};
static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
static struct platform_device ep93xx_eth_device = {
.name = "ep93xx-eth",
.id = -1,
.dev = {
.platform_data = &ep93xx_eth_data,
.platform_data = &ep93xx_eth_data,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &ep93xx_eth_dma_mask,
},
.num_resources = ARRAY_SIZE(ep93xx_eth_resource),
.resource = ep93xx_eth_resource,

6
arch/arm/mach-exynos4/Kconfig
View File

@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
help
Common setup code for the camera interfaces.
config EXYNOS4_SETUP_USB_PHY
bool
help
Common setup code for USB PHY controller
# machine support
menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.

2
arch/arm/mach-exynos4/Makefile
View File

@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o

2
arch/arm/mach-exynos4/cpu.c
View File

@@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_USB_HSPHY,
.virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,

2
arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
View File

@@ -11,7 +11,7 @@
#ifndef __PLAT_S5P_REGS_USB_PHY_H
#define __PLAT_S5P_REGS_USB_PHY_H
#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY)
#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)

0
arch/arm/mach-exynos4/usb-phy.c → arch/arm/mach-exynos4/setup-usb-phy.c
View File

2
arch/arm/mach-exynos4/time.c
View File

@@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
}
#ifdef CONFIG_PM
static void exynos4_pwm4_resume(struct clocksource *cs)
{
unsigned long pclk;
@@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
exynos4_pwm_init(4, ~0);
exynos4_pwm_start(4, 1);
}
#endif
struct clocksource pwm_clocksource = {
.name = "pwm_timer4",

11
arch/arm/mach-omap1/dma.c
View File

@@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void)
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
return -ENODEV;
ret = -ENODEV;
goto exit_device_put;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_device_del;
goto exit_device_put;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
goto exit_device_put;
goto exit_device_del;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -380,10 +381,10 @@ exit_release_d:
kfree(d);
exit_release_p:
kfree(p);
exit_device_put:
platform_device_put(pdev);
exit_device_del:
platform_device_del(pdev);
exit_device_put:
platform_device_put(pdev);
return ret;
}

2
arch/arm/mach-omap2/board-2430sdp.c
View File

@@ -26,13 +26,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>

6
arch/arm/mach-omap2/board-3430sdp.c
View File

@@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_MODE0),
};
static struct omap_board_data serial1_data = {
static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
static struct omap_board_data serial2_data = {
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data = {
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),

11
arch/arm/mach-omap2/board-4430sdp.c
View File

@@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = {
{ ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
};
static int omap_ethernet_init(void)
static int __init omap_ethernet_init(void)
{
int status;
@@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.nonremovable = true,
.ocr_mask = MMC_VDD_29_30,
.no_off_init = true,
},
{
.mmc = 1,
@@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data = {
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data = {
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data = {
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void)
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);

2
arch/arm/mach-omap2/board-apollon.c
View File

@@ -27,13 +27,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>

2
arch/arm/mach-omap2/board-cm-t35.c
View File

@@ -63,8 +63,6 @@
#define SB_T35_SMSC911X_CS 4
#define SB_T35_SMSC911X_GPIO 65
#define NAND_BLOCK_SIZE SZ_128K
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
#include <plat/gpmc-smsc911x.h>

5
arch/arm/mach-omap2/board-cm-t3517.c
View File

@@ -48,6 +48,7 @@
#include "mux.h"
#include "control.h"
#include "common-board-devices.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
.reset_gpio_port[2] = -EINVAL,
};
static int cm_t3517_init_usbh(void)
static int __init cm_t3517_init_usbh(void)
{
int err;
@@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
#define NAND_BLOCK_SIZE SZ_128K
static struct mtd_partition cm_t3517_nand_partitions[] = {
{
.name = "xloader",

2
arch/arm/mach-omap2/board-devkit8000.c
View File

@@ -61,8 +61,6 @@
#include "timer-gp.h"
#include "common-board-devices.h"
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27

8
arch/arm/mach-omap2/board-omap3beagle.c
View File

@@ -54,8 +54,6 @@
#include "pm.h"
#include "common-board-devices.h"
#define NAND_BLOCK_SIZE SZ_128K
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void)
beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
| (gpio_get_value(173) << 2);
gpio_free_array(omap3_beagle_rev_gpios,
ARRAY_SIZE(omap3_beagle_rev_gpios));
switch (beagle_rev) {
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
@@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void)
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

Some files were not shown because too many files have changed in this diff Show More