ARM: dts: add init dts file for CSR atlas7 SoC

CSR atlas7 uses Network on Chip(NoC) bus architecture, there are dozens
of MARCOs, in each MARCO, there are dozens of hardware modules.

Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Hao Liu <Hao.Liu@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Zhiwu Song
2014-12-25 16:34:19 +08:00
committed by Barry Song
parent d19b4fa012
commit 7d76d03b9b
4 changed files with 928 additions and 0 deletions

View File

@@ -3,5 +3,9 @@ CSR SiRFprimaII and SiRFmarco device tree bindings.
Required root node properties:
- compatible:
- "sirf,atlas6-cb" : atlas6 "cb" evaluation board
- "sirf,atlas6" : atlas6 device based board
- "sirf,atlas7-cb" : atlas7 "cb" evaluation board
- "sirf,atlas7" : atlas7 device based board
- "sirf,prima2-cb" : prima2 "cb" evaluation board
- "sirf,prima2" : prima2 device based board

View File

@@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_ATLAS7) += atlas7-evb.dtb
dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb

View File

@@ -0,0 +1,110 @@
/*
* DTS file for CSR SiRFatlas7 Evaluation Board
*
* Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "atlas7.dtsi"
/ {
model = "CSR SiRFatlas7 Evaluation Board";
compatible = "sirf,atlas7-cb", "sirf,atlas7";
chosen {
bootargs = "console=ttySiRF1,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
vpp_reserved: vpp_mem@5e800000 {
compatible = "sirf,reserved-memory";
reg = <0x5e800000 0x800000>;
};
nanddisk_reserved: nanddisk@46000000 {
reg = <0x46000000 0x200000>;
no-map;
};
};
noc {
mediam {
nand@17050000 {
memory-region = <&nanddisk_reserved>;
};
};
gnssm {
spi1: spi@18200000 {
status = "okay";
spiflash: macronix@0{
status = "okay";
compatible = "macronix,mx25l6405d";
reg = <0>;
spi-max-frequency = <37500000>;
spi-cpha;
spi-cpol;
#address-cells = <1>;
#size-cells = <1>;
partitions@0 {
label = "myspiboot";
reg = <0x0 0x800000>;
};
};
};
};
btm {
uart6: uart@11000000 {
status = "okay";
sirf,uart-has-rtscts;
};
};
disp-iobg {
vpp@13110000 {
memory-region = <&vpp_reserved>;
};
};
display0: display@0 {
compatible = "lvds-panel";
source = "lvds.0";
bl-gpios = <&gpio_1 63 0>;
data-lines = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <60000000>;
hactive = <1024>;
vactive = <600>;
hfront-porch = <220>;
hback-porch = <100>;
hsync-len = <1>;
vback-porch = <10>;
vfront-porch = <25>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
};

File diff suppressed because it is too large Load Diff