Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEAD

doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.

Documentation/RCU/stallwarn.txt

@@ -152,6 +152,15 @@ no non-lazy callbacks ("." is printed otherwise, as shown above) and
 "D" indicates that dyntick-idle processing is enabled ("." is printed
 otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
 
+If the relevant grace-period kthread has been unable to run prior to
+the stall warning, the following additional line is printed:
+
+	rcu_preempt kthread starved for 2023 jiffies!
+
+Starving the grace-period kthreads of CPU time can of course result in
+RCU CPU stall warnings even when all CPUs and tasks have passed through
+the required quiescent states.
+
 
 Multiple Warnings From One Stall
 
@@ -187,6 +196,11 @@ o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the
 	behavior, you might need to replace some of the cond_resched()
 	calls with calls to cond_resched_rcu_qs().
 
+o	Anything that prevents RCU's grace-period kthreads from running.
+	This can result in the "All QSes seen" console-log message.
+	This message will include information on when the kthread last
+	ran and how often it should be expected to run.
+
 o	A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
 	happen to preempt a low-priority task in the middle of an RCU
 	read-side critical section.   This is especially damaging if

Documentation/RCU/trace.txt

@@ -56,14 +56,14 @@ rcuboost:
 
 The output of "cat rcu/rcu_preempt/rcudata" looks as follows:
 
-  0!c=30455 g=30456 pq=1 qp=1 dt=126535/140000000000000/0 df=2002 of=4 ql=0/0 qs=N... b=10 ci=74572 nci=0 co=1131 ca=716
-  1!c=30719 g=30720 pq=1 qp=0 dt=132007/140000000000000/0 df=1874 of=10 ql=0/0 qs=N... b=10 ci=123209 nci=0 co=685 ca=982
-  2!c=30150 g=30151 pq=1 qp=1 dt=138537/140000000000000/0 df=1707 of=8 ql=0/0 qs=N... b=10 ci=80132 nci=0 co=1328 ca=1458
-  3 c=31249 g=31250 pq=1 qp=0 dt=107255/140000000000000/0 df=1749 of=6 ql=0/450 qs=NRW. b=10 ci=151700 nci=0 co=509 ca=622
-  4!c=29502 g=29503 pq=1 qp=1 dt=83647/140000000000000/0 df=965 of=5 ql=0/0 qs=N... b=10 ci=65643 nci=0 co=1373 ca=1521
-  5 c=31201 g=31202 pq=1 qp=1 dt=70422/0/0 df=535 of=7 ql=0/0 qs=.... b=10 ci=58500 nci=0 co=764 ca=698
-  6!c=30253 g=30254 pq=1 qp=1 dt=95363/140000000000000/0 df=780 of=5 ql=0/0 qs=N... b=10 ci=100607 nci=0 co=1414 ca=1353
-  7 c=31178 g=31178 pq=1 qp=0 dt=91536/0/0 df=547 of=4 ql=0/0 qs=.... b=10 ci=109819 nci=0 co=1115 ca=969
+  0!c=30455 g=30456 pq=1/0 qp=1 dt=126535/140000000000000/0 df=2002 of=4 ql=0/0 qs=N... b=10 ci=74572 nci=0 co=1131 ca=716
+  1!c=30719 g=30720 pq=1/0 qp=0 dt=132007/140000000000000/0 df=1874 of=10 ql=0/0 qs=N... b=10 ci=123209 nci=0 co=685 ca=982
+  2!c=30150 g=30151 pq=1/1 qp=1 dt=138537/140000000000000/0 df=1707 of=8 ql=0/0 qs=N... b=10 ci=80132 nci=0 co=1328 ca=1458
+  3 c=31249 g=31250 pq=1/1 qp=0 dt=107255/140000000000000/0 df=1749 of=6 ql=0/450 qs=NRW. b=10 ci=151700 nci=0 co=509 ca=622
+  4!c=29502 g=29503 pq=1/0 qp=1 dt=83647/140000000000000/0 df=965 of=5 ql=0/0 qs=N... b=10 ci=65643 nci=0 co=1373 ca=1521
+  5 c=31201 g=31202 pq=1/0 qp=1 dt=70422/0/0 df=535 of=7 ql=0/0 qs=.... b=10 ci=58500 nci=0 co=764 ca=698
+  6!c=30253 g=30254 pq=1/0 qp=1 dt=95363/140000000000000/0 df=780 of=5 ql=0/0 qs=N... b=10 ci=100607 nci=0 co=1414 ca=1353
+  7 c=31178 g=31178 pq=1/0 qp=0 dt=91536/0/0 df=547 of=4 ql=0/0 qs=.... b=10 ci=109819 nci=0 co=1115 ca=969
 
 This file has one line per CPU, or eight for this 8-CPU system.
 The fields are as follows:
@@ -188,14 +188,14 @@ o	"ca" is the number of RCU callbacks that have been adopted by this
 Kernels compiled with CONFIG_RCU_BOOST=y display the following from
 /debug/rcu/rcu_preempt/rcudata:
 
-  0!c=12865 g=12866 pq=1 qp=1 dt=83113/140000000000000/0 df=288 of=11 ql=0/0 qs=N... kt=0/O ktl=944 b=10 ci=60709 nci=0 co=748 ca=871
-  1 c=14407 g=14408 pq=1 qp=0 dt=100679/140000000000000/0 df=378 of=7 ql=0/119 qs=NRW. kt=0/W ktl=9b6 b=10 ci=109740 nci=0 co=589 ca=485
-  2 c=14407 g=14408 pq=1 qp=0 dt=105486/0/0 df=90 of=9 ql=0/89 qs=NRW. kt=0/W ktl=c0c b=10 ci=83113 nci=0 co=533 ca=490
-  3 c=14407 g=14408 pq=1 qp=0 dt=107138/0/0 df=142 of=8 ql=0/188 qs=NRW. kt=0/W ktl=b96 b=10 ci=121114 nci=0 co=426 ca=290
-  4 c=14405 g=14406 pq=1 qp=1 dt=50238/0/0 df=706 of=7 ql=0/0 qs=.... kt=0/W ktl=812 b=10 ci=34929 nci=0 co=643 ca=114
-  5!c=14168 g=14169 pq=1 qp=0 dt=45465/140000000000000/0 df=161 of=11 ql=0/0 qs=N... kt=0/O ktl=b4d b=10 ci=47712 nci=0 co=677 ca=722
-  6 c=14404 g=14405 pq=1 qp=0 dt=59454/0/0 df=94 of=6 ql=0/0 qs=.... kt=0/W ktl=e57 b=10 ci=55597 nci=0 co=701 ca=811
-  7 c=14407 g=14408 pq=1 qp=1 dt=68850/0/0 df=31 of=8 ql=0/0 qs=.... kt=0/W ktl=14bd b=10 ci=77475 nci=0 co=508 ca=1042
+  0!c=12865 g=12866 pq=1/0 qp=1 dt=83113/140000000000000/0 df=288 of=11 ql=0/0 qs=N... kt=0/O ktl=944 b=10 ci=60709 nci=0 co=748 ca=871
+  1 c=14407 g=14408 pq=1/0 qp=0 dt=100679/140000000000000/0 df=378 of=7 ql=0/119 qs=NRW. kt=0/W ktl=9b6 b=10 ci=109740 nci=0 co=589 ca=485
+  2 c=14407 g=14408 pq=1/0 qp=0 dt=105486/0/0 df=90 of=9 ql=0/89 qs=NRW. kt=0/W ktl=c0c b=10 ci=83113 nci=0 co=533 ca=490
+  3 c=14407 g=14408 pq=1/0 qp=0 dt=107138/0/0 df=142 of=8 ql=0/188 qs=NRW. kt=0/W ktl=b96 b=10 ci=121114 nci=0 co=426 ca=290
+  4 c=14405 g=14406 pq=1/0 qp=1 dt=50238/0/0 df=706 of=7 ql=0/0 qs=.... kt=0/W ktl=812 b=10 ci=34929 nci=0 co=643 ca=114
+  5!c=14168 g=14169 pq=1/0 qp=0 dt=45465/140000000000000/0 df=161 of=11 ql=0/0 qs=N... kt=0/O ktl=b4d b=10 ci=47712 nci=0 co=677 ca=722
+  6 c=14404 g=14405 pq=1/0 qp=0 dt=59454/0/0 df=94 of=6 ql=0/0 qs=.... kt=0/W ktl=e57 b=10 ci=55597 nci=0 co=701 ca=811
+  7 c=14407 g=14408 pq=1/0 qp=1 dt=68850/0/0 df=31 of=8 ql=0/0 qs=.... kt=0/W ktl=14bd b=10 ci=77475 nci=0 co=508 ca=1042
 
 This is similar to the output discussed above, but contains the following
 additional fields:

arch/arm/kvm/Kconfig

@@ -23,6 +23,7 @@ config KVM
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_ARM_HOST
+	select SRCU
 	depends on ARM_VIRT_EXT && ARM_LPAE
 	---help---
 	  Support hosting virtualized guest machines. You will also

arch/arm64/kvm/Kconfig

@@ -26,6 +26,7 @@ config KVM
 	select KVM_ARM_HOST
 	select KVM_ARM_VGIC
 	select KVM_ARM_TIMER
+	select SRCU
 	---help---
 	  Support hosting virtualized guest machines.
 

arch/mips/kvm/Kconfig

@@ -20,6 +20,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select KVM_MMIO
+	select SRCU
 	---help---
 	  Support for hosting Guest kernels.
 	  Currently supported on MIPS32 processors.

arch/powerpc/kvm/Kconfig

@@ -21,6 +21,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select HAVE_KVM_EVENTFD
+	select SRCU
 
 config KVM_BOOK3S_HANDLER
 	bool

arch/s390/kvm/Kconfig

@@ -28,6 +28,7 @@ config KVM
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_IRQFD
 	select HAVE_KVM_IRQ_ROUTING
+	select SRCU
 	---help---
 	  Support hosting paravirtualized guest machines using the SIE
 	  virtualization capability on the mainframe. This should work

arch/tile/kvm/Kconfig

@@ -21,6 +21,7 @@ config KVM
 	depends on HAVE_KVM && MODULES
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select SRCU
 	---help---
 	  Support hosting paravirtualized guest machines.
 

arch/x86/Kconfig

@@ -138,6 +138,7 @@ config X86
 	select HAVE_ACPI_APEI_NMI if ACPI
 	select ACPI_LEGACY_TABLES_LOOKUP if ACPI
 	select X86_FEATURE_NAMES if PROC_FS
+	select SRCU
 
 config INSTRUCTION_DECODER
 	def_bool y

arch/x86/kvm/Kconfig

@@ -40,6 +40,7 @@ config KVM
 	select HAVE_KVM_MSI
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_VFIO
+	select SRCU
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent

drivers/clk/Kconfig

@@ -13,6 +13,7 @@ config COMMON_CLK
 	bool
 	select HAVE_CLK_PREPARE
 	select CLKDEV_LOOKUP
+	select SRCU
 	---help---
 	  The common clock framework is a single definition of struct
 	  clk, useful across many platforms, as well as an

drivers/cpufreq/Kconfig

@@ -2,6 +2,7 @@ menu "CPU Frequency scaling"
 
 config CPU_FREQ
 	bool "CPU Frequency scaling"
+	select SRCU
 	help
 	  CPU Frequency scaling allows you to change the clock speed of 
 	  CPUs on the fly. This is a nice method to save power, because 

drivers/devfreq/Kconfig

@@ -1,5 +1,6 @@
 menuconfig PM_DEVFREQ
 	bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
+	select SRCU
 	help
 	  A device may have a list of frequencies and voltages available.
 	  devfreq, a generic DVFS framework can be registered for a device

drivers/md/Kconfig

@@ -5,6 +5,7 @@
 menuconfig MD
 	bool "Multiple devices driver support (RAID and LVM)"
 	depends on BLOCK
+	select SRCU
 	help
 	  Support multiple physical spindles through a single logical device.
 	  Required for RAID and logical volume management.

drivers/net/Kconfig

@@ -197,6 +197,7 @@ config NETCONSOLE_DYNAMIC
 
 config NETPOLL
 	def_bool NETCONSOLE
+	select SRCU
 
 config NET_POLL_CONTROLLER
 	def_bool NETPOLL

fs/btrfs/Kconfig

@@ -8,6 +8,7 @@ config BTRFS_FS
 	select LZO_DECOMPRESS
 	select RAID6_PQ
 	select XOR_BLOCKS
+	select SRCU
 
 	help
 	  Btrfs is a general purpose copy-on-write filesystem with extents,

fs/notify/Kconfig

@@ -1,5 +1,6 @@
 config FSNOTIFY
 	def_bool n
+	select SRCU
 
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"

fs/quota/Kconfig

@@ -5,6 +5,7 @@
 config QUOTA
 	bool "Quota support"
 	select QUOTACTL
+	select SRCU
 	help
 	  If you say Y here, you will be able to set per user limits for disk
 	  usage (also called disk quotas). Currently, it works for the

include/linux/compiler.h

@@ -385,7 +385,7 @@ static __always_inline void __assign_once_size(volatile void *p, void *res, int
 
 /* Is this type a native word size -- useful for atomic operations */
 #ifndef __native_word
-# define __native_word(t) (sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
+# define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
 #endif
 
 /* Compile time object size, -1 for unknown */

include/linux/rculist.h

@@ -524,11 +524,11 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_continue_rcu(pos, member)			\
-	for (pos = hlist_entry_safe(rcu_dereference((pos)->member.next),\
-			typeof(*(pos)), member);			\
+	for (pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu( \
+			&(pos)->member)), typeof(*(pos)), member);	\
 	     pos;							\
-	     pos = hlist_entry_safe(rcu_dereference((pos)->member.next),\
-			typeof(*(pos)), member))
+	     pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(	\
+			&(pos)->member)), typeof(*(pos)), member))
 
 /**
  * hlist_for_each_entry_continue_rcu_bh - iterate over a hlist continuing after current point
@@ -536,11 +536,11 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_continue_rcu_bh(pos, member)		\
-	for (pos = hlist_entry_safe(rcu_dereference_bh((pos)->member.next),\
-			typeof(*(pos)), member);			\
+	for (pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu(  \
+			&(pos)->member)), typeof(*(pos)), member);	\
 	     pos;							\
-	     pos = hlist_entry_safe(rcu_dereference_bh((pos)->member.next),\
-			typeof(*(pos)), member))
+	     pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu(	\
+			&(pos)->member)), typeof(*(pos)), member))
 
 /**
  * hlist_for_each_entry_from_rcu - iterate over a hlist continuing from current point