mirror of
https://github.com/armbian/linux.git
synced 2026-01-06 10:13:00 -08:00
Merge branch 'linus' into timers/core
Reason: Get upstream fixes before adding conflicting code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
Thomas Gleixner
8
CREDITS
8
CREDITS
@@ -1510,6 +1510,14 @@ D: Natsemi ethernet
|
||||
D: Cobalt Networks (x86) support
|
||||
D: This-and-That
|
||||
|
||||
N: Mark M. Hoffman
|
||||
E: mhoffman@lightlink.com
|
||||
D: asb100, lm93 and smsc47b397 hardware monitoring drivers
|
||||
D: hwmon subsystem core
|
||||
D: hwmon subsystem maintainer
|
||||
D: i2c-sis96x and i2c-stub SMBus drivers
|
||||
S: USA
|
||||
|
||||
N: Dirk Hohndel
|
||||
E: hohndel@suse.de
|
||||
D: The XFree86[tm] Project
|
||||
|
||||
@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
|
||||
<chapter id="uart16x50">
|
||||
<title>16x50 UART Driver</title>
|
||||
!Edrivers/tty/serial/serial_core.c
|
||||
!Edrivers/tty/serial/8250/8250.c
|
||||
!Edrivers/tty/serial/8250/8250_core.c
|
||||
</chapter>
|
||||
|
||||
<chapter id="fbdev">
|
||||
|
||||
@@ -13,9 +13,6 @@ Required parent device properties:
|
||||
4 = active high level-sensitive
|
||||
8 = active low level-sensitive
|
||||
|
||||
Optional parent device properties:
|
||||
- reg : contains the PRCMU mailbox address for the AB8500 i2c port
|
||||
|
||||
The AB8500 consists of a large and varied group of sub-devices:
|
||||
|
||||
Device IRQ Names Supply Names Description
|
||||
@@ -86,9 +83,8 @@ Non-standard child device properties:
|
||||
- stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
|
||||
- stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
|
||||
|
||||
ab8500@5 {
|
||||
ab8500 {
|
||||
compatible = "stericsson,ab8500";
|
||||
reg = <5>; /* mailbox 5 is i2c */
|
||||
interrupts = <0 40 0x4>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
@@ -11,6 +11,9 @@ Required properties:
|
||||
- "nvidia,tegra20-uart"
|
||||
- "nxp,lpc3220-uart"
|
||||
- "ibm,qpace-nwp-serial"
|
||||
- "altr,16550-FIFO32"
|
||||
- "altr,16550-FIFO64"
|
||||
- "altr,16550-FIFO128"
|
||||
- "serial" if the port type is unknown.
|
||||
- reg : offset and length of the register set for the device.
|
||||
- interrupts : should contain uart interrupt.
|
||||
|
||||
@@ -23,7 +23,7 @@ Supported chips:
|
||||
Datasheet: Publicly available at the Maxim website
|
||||
http://www.maxim-ic.com/
|
||||
* Microchip (TelCom) TCN75
|
||||
Prefix: 'lm75'
|
||||
Prefix: 'tcn75'
|
||||
Addresses scanned: none
|
||||
Datasheet: Publicly available at the Microchip website
|
||||
http://www.microchip.com/
|
||||
|
||||
@@ -5,7 +5,7 @@ Supported adapters:
|
||||
Documentation:
|
||||
http://www.diolan.com/i2c/u2c12.html
|
||||
|
||||
Author: Guenter Roeck <guenter.roeck@ericsson.com>
|
||||
Author: Guenter Roeck <linux@roeck-us.net>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
@@ -596,9 +596,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
||||
is selected automatically. Check
|
||||
Documentation/kdump/kdump.txt for further details.
|
||||
|
||||
crashkernel_low=size[KMG]
|
||||
[KNL, x86] parts under 4G.
|
||||
|
||||
crashkernel=range1:size1[,range2:size2,...][@offset]
|
||||
[KNL] Same as above, but depends on the memory
|
||||
in the running system. The syntax of range is
|
||||
@@ -606,6 +603,26 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
||||
a memory unit (amount[KMG]). See also
|
||||
Documentation/kdump/kdump.txt for an example.
|
||||
|
||||
crashkernel=size[KMG],high
|
||||
[KNL, x86_64] range could be above 4G. Allow kernel
|
||||
to allocate physical memory region from top, so could
|
||||
be above 4G if system have more than 4G ram installed.
|
||||
Otherwise memory region will be allocated below 4G, if
|
||||
available.
|
||||
It will be ignored if crashkernel=X is specified.
|
||||
crashkernel=size[KMG],low
|
||||
[KNL, x86_64] range under 4G. When crashkernel=X,high
|
||||
is passed, kernel could allocate physical memory region
|
||||
above 4G, that cause second kernel crash on system
|
||||
that require some amount of low memory, e.g. swiotlb
|
||||
requires at least 64M+32K low memory. Kernel would
|
||||
try to allocate 72M below 4G automatically.
|
||||
This one let user to specify own low range under 4G
|
||||
for second kernel instead.
|
||||
0: to disable low allocation.
|
||||
It will be ignored when crashkernel=X,high is not used
|
||||
or memory reserved is below 4G.
|
||||
|
||||
cs89x0_dma= [HW,NET]
|
||||
Format: <dma>
|
||||
|
||||
@@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
||||
edd= [EDD]
|
||||
Format: {"off" | "on" | "skip[mbr]"}
|
||||
|
||||
efi_no_storage_paranoia [EFI; X86]
|
||||
Using this parameter you can use more than 50% of
|
||||
your efi variable storage. Use this parameter only if
|
||||
you are really sure that your UEFI does sane gc and
|
||||
fulfills the spec otherwise your board may brick.
|
||||
|
||||
eisa_irq_edge= [PARISC,HW]
|
||||
See header of drivers/parisc/eisa.c.
|
||||
|
||||
|
||||
@@ -15,6 +15,13 @@ amemthresh - INTEGER
|
||||
enabled and the variable is automatically set to 2, otherwise
|
||||
the strategy is disabled and the variable is set to 1.
|
||||
|
||||
backup_only - BOOLEAN
|
||||
0 - disabled (default)
|
||||
not 0 - enabled
|
||||
|
||||
If set, disable the director function while the server is
|
||||
in backup mode to avoid packet loops for DR/TUN methods.
|
||||
|
||||
conntrack - BOOLEAN
|
||||
0 - disabled (default)
|
||||
not 0 - enabled
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
Copyright (c) 2003-2012 QLogic Corporation
|
||||
Copyright (c) 2003-2013 QLogic Corporation
|
||||
QLogic Linux FC-FCoE Driver
|
||||
|
||||
This program includes a device driver for Linux 3.x.
|
||||
|
||||
@@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
||||
enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
|
||||
power_save - Automatic power-saving timeout (in second, 0 =
|
||||
disable)
|
||||
power_save_controller - Support runtime D3 of HD-audio controller
|
||||
(-1 = on for supported chip (default), false = off,
|
||||
true = force to on even for unsupported hardware)
|
||||
power_save_controller - Reset HD-audio controller in power-saving mode
|
||||
(default = on)
|
||||
align_buffer_size - Force rounding of buffer/period sizes to multiples
|
||||
of 128 bytes. This is more efficient in terms of memory
|
||||
access but isn't required by the HDA spec and prevents
|
||||
@@ -912,7 +911,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
||||
models depending on the codec chip. The list of available models
|
||||
is found in HD-Audio-Models.txt
|
||||
|
||||
The model name "genric" is treated as a special case. When this
|
||||
The model name "generic" is treated as a special case. When this
|
||||
model is given, the driver uses the generic codec parser without
|
||||
"codec-patch". It's sometimes good for testing and debugging.
|
||||
|
||||
|
||||
@@ -285,7 +285,7 @@ sample data.
|
||||
<H4>
|
||||
7.2.4 Close Callback</H4>
|
||||
The <TT>close</TT> callback is called when this device is closed by the
|
||||
applicaion. If any private data was allocated in open callback, it must
|
||||
application. If any private data was allocated in open callback, it must
|
||||
be released in the close callback. The deletion of ALSA port should be
|
||||
done here, too. This callback must not be NULL.
|
||||
<H4>
|
||||
|
||||
100
MAINTAINERS
100
MAINTAINERS
@@ -1338,12 +1338,6 @@ S: Maintained
|
||||
F: drivers/platform/x86/asus*.c
|
||||
F: drivers/platform/x86/eeepc*.c
|
||||
|
||||
ASUS ASB100 HARDWARE MONITOR DRIVER
|
||||
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: drivers/hwmon/asb100.c
|
||||
|
||||
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
|
||||
M: Dan Williams <djbw@fb.com>
|
||||
W: http://sourceforge.net/projects/xscaleiop
|
||||
@@ -1467,6 +1461,12 @@ F: drivers/dma/at_hdmac.c
|
||||
F: drivers/dma/at_hdmac_regs.h
|
||||
F: include/linux/platform_data/dma-atmel.h
|
||||
|
||||
ATMEL I2C DRIVER
|
||||
M: Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/i2c/busses/i2c-at91.c
|
||||
|
||||
ATMEL ISI DRIVER
|
||||
M: Josh Wu <josh.wu@atmel.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
@@ -2629,7 +2629,7 @@ F: include/uapi/drm/
|
||||
|
||||
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
|
||||
M: Daniel Vetter <daniel.vetter@ffwll.ch>
|
||||
L: intel-gfx@lists.freedesktop.org (subscribers-only)
|
||||
L: intel-gfx@lists.freedesktop.org
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
T: git git://people.freedesktop.org/~danvet/drm-intel
|
||||
S: Supported
|
||||
@@ -3242,6 +3242,12 @@ F: Documentation/firmware_class/
|
||||
F: drivers/base/firmware*.c
|
||||
F: include/linux/firmware.h
|
||||
|
||||
FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
|
||||
M: Joshua Morris <josh.h.morris@us.ibm.com>
|
||||
M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
|
||||
S: Maintained
|
||||
F: drivers/block/rsxx/
|
||||
|
||||
FLOPPY DRIVER
|
||||
M: Jiri Kosina <jkosina@suse.cz>
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
|
||||
@@ -3851,7 +3857,7 @@ F: drivers/i2c/busses/i2c-ismt.c
|
||||
F: Documentation/i2c/busses/i2c-ismt
|
||||
|
||||
I2C/SMBUS STUB DRIVER
|
||||
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
|
||||
M: Jean Delvare <khali@linux-fr.org>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/i2c/i2c-stub.c
|
||||
@@ -4005,6 +4011,22 @@ M: Stanislaw Gruszka <stf_xl@wp.pl>
|
||||
S: Maintained
|
||||
F: drivers/usb/atm/ueagle-atm.c
|
||||
|
||||
INA209 HARDWARE MONITOR DRIVER
|
||||
M: Guenter Roeck <linux@roeck-us.net>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/ina209
|
||||
F: Documentation/devicetree/bindings/i2c/ina209.txt
|
||||
F: drivers/hwmon/ina209.c
|
||||
|
||||
INA2XX HARDWARE MONITOR DRIVER
|
||||
M: Guenter Roeck <linux@roeck-us.net>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/ina2xx
|
||||
F: drivers/hwmon/ina2xx.c
|
||||
F: include/linux/platform_data/ina2xx.h
|
||||
|
||||
INDUSTRY PACK SUBSYSTEM (IPACK)
|
||||
M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
|
||||
M: Jens Taprogge <jens.taprogge@taprogge.org>
|
||||
@@ -4919,6 +4941,12 @@ W: logfs.org
|
||||
S: Maintained
|
||||
F: fs/logfs/
|
||||
|
||||
LPC32XX MACHINE SUPPORT
|
||||
M: Roland Stigge <stigge@antcom.de>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: arch/arm/mach-lpc32xx/
|
||||
|
||||
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
|
||||
M: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
|
||||
M: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
|
||||
@@ -5043,9 +5071,8 @@ S: Maintained
|
||||
F: drivers/net/ethernet/marvell/sk*
|
||||
|
||||
MARVELL LIBERTAS WIRELESS DRIVER
|
||||
M: Dan Williams <dcbw@redhat.com>
|
||||
L: libertas-dev@lists.infradead.org
|
||||
S: Maintained
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/libertas/
|
||||
|
||||
MARVELL MV643XX ETHERNET DRIVER
|
||||
@@ -5098,6 +5125,15 @@ S: Maintained
|
||||
F: Documentation/hwmon/max6650
|
||||
F: drivers/hwmon/max6650.c
|
||||
|
||||
MAX6697 HARDWARE MONITOR DRIVER
|
||||
M: Guenter Roeck <linux@roeck-us.net>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/max6697
|
||||
F: Documentation/devicetree/bindings/i2c/max6697.txt
|
||||
F: drivers/hwmon/max6697.c
|
||||
F: include/linux/platform_data/max6697.h
|
||||
|
||||
MAXIRADIO FM RADIO RECEIVER DRIVER
|
||||
M: Hans Verkuil <hverkuil@xs4all.nl>
|
||||
L: linux-media@vger.kernel.org
|
||||
@@ -5538,6 +5574,7 @@ F: include/uapi/linux/if_*
|
||||
F: include/uapi/linux/netdevice.h
|
||||
|
||||
NETXEN (1/10) GbE SUPPORT
|
||||
M: Manish Chopra <manish.chopra@qlogic.com>
|
||||
M: Sony Chacko <sony.chacko@qlogic.com>
|
||||
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
|
||||
L: netdev@vger.kernel.org
|
||||
@@ -5622,6 +5659,14 @@ S: Maintained
|
||||
F: drivers/video/riva/
|
||||
F: drivers/video/nvidia/
|
||||
|
||||
NVM EXPRESS DRIVER
|
||||
M: Matthew Wilcox <willy@linux.intel.com>
|
||||
L: linux-nvme@lists.infradead.org
|
||||
T: git git://git.infradead.org/users/willy/linux-nvme.git
|
||||
S: Supported
|
||||
F: drivers/block/nvme.c
|
||||
F: include/linux/nvme.h
|
||||
|
||||
OMAP SUPPORT
|
||||
M: Tony Lindgren <tony@atomide.com>
|
||||
L: linux-omap@vger.kernel.org
|
||||
@@ -5650,7 +5695,7 @@ S: Maintained
|
||||
F: arch/arm/*omap*/*clock*
|
||||
|
||||
OMAP POWER MANAGEMENT SUPPORT
|
||||
M: Kevin Hilman <khilman@ti.com>
|
||||
M: Kevin Hilman <khilman@deeprootsystems.com>
|
||||
L: linux-omap@vger.kernel.org
|
||||
S: Maintained
|
||||
F: arch/arm/*omap*/*pm*
|
||||
@@ -5744,7 +5789,7 @@ F: arch/arm/*omap*/usb*
|
||||
|
||||
OMAP GPIO DRIVER
|
||||
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
||||
M: Kevin Hilman <khilman@ti.com>
|
||||
M: Kevin Hilman <khilman@deeprootsystems.com>
|
||||
L: linux-omap@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/gpio/gpio-omap.c
|
||||
@@ -6176,7 +6221,7 @@ F: include/linux/power_supply.h
|
||||
F: drivers/power/
|
||||
|
||||
PNP SUPPORT
|
||||
M: Adam Belay <abelay@mit.edu>
|
||||
M: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||||
M: Bjorn Helgaas <bhelgaas@google.com>
|
||||
S: Maintained
|
||||
F: drivers/pnp/
|
||||
@@ -6518,12 +6563,6 @@ S: Maintained
|
||||
F: Documentation/blockdev/ramdisk.txt
|
||||
F: drivers/block/brd.c
|
||||
|
||||
RAMSAM DRIVER (IBM RamSan 70/80 PCI SSD Flash Card)
|
||||
M: Joshua Morris <josh.h.morris@us.ibm.com>
|
||||
M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
|
||||
S: Maintained
|
||||
F: drivers/block/rsxx/
|
||||
|
||||
RANDOM NUMBER DRIVER
|
||||
M: Theodore Ts'o" <tytso@mit.edu>
|
||||
S: Maintained
|
||||
@@ -6592,7 +6631,7 @@ S: Supported
|
||||
F: fs/reiserfs/
|
||||
|
||||
REGISTER MAP ABSTRACTION
|
||||
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||||
M: Mark Brown <broonie@kernel.org>
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
|
||||
S: Supported
|
||||
F: drivers/base/regmap/
|
||||
@@ -6918,7 +6957,6 @@ F: drivers/scsi/st*
|
||||
|
||||
SCTP PROTOCOL
|
||||
M: Vlad Yasevich <vyasevich@gmail.com>
|
||||
M: Sridhar Samudrala <sri@us.ibm.com>
|
||||
M: Neil Horman <nhorman@tuxdriver.com>
|
||||
L: linux-sctp@vger.kernel.org
|
||||
W: http://lksctp.sourceforge.net
|
||||
@@ -7140,7 +7178,7 @@ F: arch/arm/mach-s3c2410/bast-irq.c
|
||||
|
||||
TI DAVINCI MACHINE SUPPORT
|
||||
M: Sekhar Nori <nsekhar@ti.com>
|
||||
M: Kevin Hilman <khilman@ti.com>
|
||||
M: Kevin Hilman <khilman@deeprootsystems.com>
|
||||
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
|
||||
T: git git://gitorious.org/linux-davinci/linux-davinci.git
|
||||
Q: http://patchwork.kernel.org/project/linux-davinci/list/
|
||||
@@ -7173,13 +7211,6 @@ L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/ethernet/sis/sis900.*
|
||||
|
||||
SIS 96X I2C/SMBUS DRIVER
|
||||
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/i2c/busses/i2c-sis96x
|
||||
F: drivers/i2c/busses/i2c-sis96x.c
|
||||
|
||||
SIS FRAMEBUFFER DRIVER
|
||||
M: Thomas Winischhofer <thomas@winischhofer.net>
|
||||
W: http://www.winischhofer.net/linuxsisvga.shtml
|
||||
@@ -7257,7 +7288,7 @@ F: Documentation/hwmon/sch5627
|
||||
F: drivers/hwmon/sch5627.c
|
||||
|
||||
SMSC47B397 HARDWARE MONITOR DRIVER
|
||||
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
|
||||
M: Jean Delvare <khali@linux-fr.org>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/smsc47b397
|
||||
@@ -7348,7 +7379,7 @@ F: sound/
|
||||
|
||||
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
|
||||
M: Liam Girdwood <lgirdwood@gmail.com>
|
||||
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||||
M: Mark Brown <broonie@kernel.org>
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
|
||||
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
|
||||
W: http://alsa-project.org/main/index.php/ASoC
|
||||
@@ -7437,7 +7468,7 @@ F: drivers/clk/spear/
|
||||
|
||||
SPI SUBSYSTEM
|
||||
M: Grant Likely <grant.likely@secretlab.ca>
|
||||
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||||
M: Mark Brown <broonie@kernel.org>
|
||||
L: spi-devel-general@lists.sourceforge.net
|
||||
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
|
||||
T: git git://git.secretlab.ca/git/linux-2.6.git
|
||||
@@ -7680,9 +7711,10 @@ F: include/linux/swiotlb.h
|
||||
|
||||
SYNOPSYS ARC ARCHITECTURE
|
||||
M: Vineet Gupta <vgupta@synopsys.com>
|
||||
L: linux-snps-arc@vger.kernel.org
|
||||
S: Supported
|
||||
F: arch/arc/
|
||||
F: Documentation/devicetree/bindings/arc/
|
||||
F: drivers/tty/serial/arc-uart.c
|
||||
|
||||
SYSV FILESYSTEM
|
||||
M: Christoph Hellwig <hch@infradead.org>
|
||||
@@ -8681,7 +8713,7 @@ F: drivers/scsi/vmw_pvscsi.h
|
||||
|
||||
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
|
||||
M: Liam Girdwood <lrg@ti.com>
|
||||
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||||
M: Mark Brown <broonie@kernel.org>
|
||||
W: http://opensource.wolfsonmicro.com/node/15
|
||||
W: http://www.slimlogic.co.uk/?p=48
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/regulator.git
|
||||
|
||||
5
Makefile
5
Makefile
@@ -1,7 +1,7 @@
|
||||
VERSION = 3
|
||||
PATCHLEVEL = 9
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc8
|
||||
NAME = Unicycling Gorilla
|
||||
|
||||
# *DOCUMENTATION*
|
||||
@@ -513,7 +513,8 @@ ifeq ($(KBUILD_EXTMOD),)
|
||||
# Carefully list dependencies so we do not try to build scripts twice
|
||||
# in parallel
|
||||
PHONY += scripts
|
||||
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
|
||||
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
|
||||
asm-generic
|
||||
$(Q)$(MAKE) $(build)=$(@)
|
||||
|
||||
# Objects we will link into vmlinux / subdirs we need to visit
|
||||
|
||||
@@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC
|
||||
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
|
||||
bool
|
||||
|
||||
config HAVE_VIRT_TO_BUS
|
||||
bool
|
||||
help
|
||||
An architecture should select this if it implements the
|
||||
deprecated interface virt_to_bus(). All new architectures
|
||||
should probably not select this.
|
||||
|
||||
config HAVE_ARCH_SECCOMP_FILTER
|
||||
bool
|
||||
help
|
||||
|
||||
@@ -9,7 +9,7 @@ config ALPHA
|
||||
select HAVE_PERF_EVENTS
|
||||
select HAVE_DMA_ATTRS
|
||||
select HAVE_GENERIC_HARDIRQS
|
||||
select HAVE_VIRT_TO_BUS
|
||||
select VIRT_TO_BUS
|
||||
select GENERIC_IRQ_PROBE
|
||||
select AUTO_IRQ_AFFINITY if SMP
|
||||
select GENERIC_IRQ_SHOW
|
||||
|
||||
@@ -12,7 +12,7 @@ NM := $(NM) -B
|
||||
|
||||
LDFLAGS_vmlinux := -static -N #-relax
|
||||
CHECKFLAGS += -D__alpha__ -m64
|
||||
cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
|
||||
cflags-y := -pipe -mno-fp-regs -ffixed-8
|
||||
cflags-y += $(call cc-option, -fno-jump-tables)
|
||||
|
||||
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
|
||||
|
||||
@@ -26,7 +26,7 @@
|
||||
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
|
||||
#define fd_cacheflush(addr,size) /* nothing */
|
||||
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\
|
||||
IRQF_DISABLED, "floppy", NULL)
|
||||
0, "floppy", NULL)
|
||||
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
@@ -117,13 +117,6 @@ handle_irq(int irq)
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* From here we must proceed with IPL_MAX. Note that we do not
|
||||
* explicitly enable interrupts afterwards - some MILO PALcode
|
||||
* (namely LX164 one) seems to have severe problems with RTI
|
||||
* at IPL 0.
|
||||
*/
|
||||
local_irq_disable();
|
||||
irq_enter();
|
||||
generic_handle_irq_desc(irq, desc);
|
||||
irq_exit();
|
||||
|
||||
@@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
|
||||
unsigned long la_ptr, struct pt_regs *regs)
|
||||
{
|
||||
struct pt_regs *old_regs;
|
||||
|
||||
/*
|
||||
* Disable interrupts during IRQ handling.
|
||||
* Note that there is no matching local_irq_enable() due to
|
||||
* severe problems with RTI at IPL0 and some MILO PALcode
|
||||
* (namely LX164).
|
||||
*/
|
||||
local_irq_disable();
|
||||
switch (type) {
|
||||
case 0:
|
||||
#ifdef CONFIG_SMP
|
||||
@@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
|
||||
{
|
||||
long cpu;
|
||||
|
||||
local_irq_disable();
|
||||
smp_percpu_timer_interrupt(regs);
|
||||
cpu = smp_processor_id();
|
||||
if (cpu != boot_cpuid) {
|
||||
@@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
|
||||
|
||||
struct irqaction timer_irqaction = {
|
||||
.handler = timer_interrupt,
|
||||
.flags = IRQF_DISABLED,
|
||||
.name = "timer",
|
||||
};
|
||||
|
||||
|
||||
@@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
|
||||
extern void free_reserved_mem(void *, void *);
|
||||
extern void pcibios_claim_one_bus(struct pci_bus *);
|
||||
|
||||
static struct resource irongate_io = {
|
||||
.name = "Irongate PCI IO",
|
||||
.flags = IORESOURCE_IO,
|
||||
};
|
||||
static struct resource irongate_mem = {
|
||||
.name = "Irongate PCI MEM",
|
||||
.flags = IORESOURCE_MEM,
|
||||
@@ -209,6 +213,7 @@ nautilus_init_pci(void)
|
||||
|
||||
irongate = pci_get_bus_and_slot(0, 0);
|
||||
bus->self = irongate;
|
||||
bus->resource[0] = &irongate_io;
|
||||
bus->resource[1] = &irongate_mem;
|
||||
|
||||
pci_bus_size_bridges(bus);
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user