Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

Conflicts:
    drivers/android/binder.c
        Keep AOSP changes and discard LTS binder changes, since these LTS changes
        have already been merged and further refactored in AOSP tree long ago.

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 83
+SUBLEVEL = 85
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 

arch/arc/include/asm/cache.h

@@ -88,7 +88,9 @@ extern int ioc_exists;
 #define ARC_REG_SLC_FLUSH	0x904
 #define ARC_REG_SLC_INVALIDATE	0x905
 #define ARC_REG_SLC_RGN_START	0x914
+#define ARC_REG_SLC_RGN_START1	0x915
 #define ARC_REG_SLC_RGN_END	0x916
+#define ARC_REG_SLC_RGN_END1	0x917
 
 /* Bit val in SLC_CONTROL */
 #define SLC_CTRL_IM		0x040

arch/arc/mm/cache.c

@@ -543,6 +543,7 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
 	static DEFINE_SPINLOCK(lock);
 	unsigned long flags;
 	unsigned int ctrl;
+	phys_addr_t end;
 
 	spin_lock_irqsave(&lock, flags);
 
@@ -572,8 +573,16 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
 	 * END needs to be setup before START (latter triggers the operation)
 	 * END can't be same as START, so add (l2_line_sz - 1) to sz
 	 */
-	write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
-	write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
+	end = paddr + sz + l2_line_sz - 1;
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end));
+
+	write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end));
+
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr));
+
+	write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr));
 
 	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
 

arch/arm64/include/asm/elf.h

@@ -114,10 +114,10 @@
 
 /*
  * This is the base location for PIE (ET_DYN with INTERP) loads. On
- * 64-bit, this is raised to 4GB to leave the entire 32-bit address
+ * 64-bit, this is above 4GB to leave the entire 32-bit address
  * space open for things that want to use the area for 32-bit pointers.
  */
-#define ELF_ET_DYN_BASE		0x100000000UL
+#define ELF_ET_DYN_BASE		(2 * TASK_SIZE_64 / 3)
 
 #ifndef __ASSEMBLY__
 

arch/x86/crypto/sha1_avx2_x86_64_asm.S

@@ -117,11 +117,10 @@
 	.set T1, REG_T1
 .endm
 
-#define K_BASE		%r8
 #define HASH_PTR	%r9
+#define BLOCKS_CTR	%r8
 #define BUFFER_PTR	%r10
 #define BUFFER_PTR2	%r13
-#define BUFFER_END	%r11
 
 #define PRECALC_BUF	%r14
 #define WK_BUF		%r15
@@ -205,14 +204,14 @@
 		 * blended AVX2 and ALU instruction scheduling
 		 * 1 vector iteration per 8 rounds
 		 */
-		vmovdqu ((i * 2) + PRECALC_OFFSET)(BUFFER_PTR), W_TMP
+		vmovdqu (i * 2)(BUFFER_PTR), W_TMP
 	.elseif ((i & 7) == 1)
-		vinsertf128 $1, (((i-1) * 2)+PRECALC_OFFSET)(BUFFER_PTR2),\
+		vinsertf128 $1, ((i-1) * 2)(BUFFER_PTR2),\
 			 WY_TMP, WY_TMP
 	.elseif ((i & 7) == 2)
 		vpshufb YMM_SHUFB_BSWAP, WY_TMP, WY
 	.elseif ((i & 7) == 4)
-		vpaddd  K_XMM(K_BASE), WY, WY_TMP
+		vpaddd  K_XMM + K_XMM_AR(%rip), WY, WY_TMP
 	.elseif ((i & 7) == 7)
 		vmovdqu  WY_TMP, PRECALC_WK(i&~7)
 
@@ -255,7 +254,7 @@
 		vpxor	WY, WY_TMP, WY_TMP
 	.elseif ((i & 7) == 7)
 		vpxor	WY_TMP2, WY_TMP, WY
-		vpaddd	K_XMM(K_BASE), WY, WY_TMP
+		vpaddd  K_XMM + K_XMM_AR(%rip), WY, WY_TMP
 		vmovdqu	WY_TMP, PRECALC_WK(i&~7)
 
 		PRECALC_ROTATE_WY
@@ -291,7 +290,7 @@
 		vpsrld	$30, WY, WY
 		vpor	WY, WY_TMP, WY
 	.elseif ((i & 7) == 7)
-		vpaddd	K_XMM(K_BASE), WY, WY_TMP
+		vpaddd  K_XMM + K_XMM_AR(%rip), WY, WY_TMP
 		vmovdqu	WY_TMP, PRECALC_WK(i&~7)
 
 		PRECALC_ROTATE_WY
@@ -446,6 +445,16 @@
 
 .endm
 
+/* Add constant only if (%2 > %3) condition met (uses RTA as temp)
+ * %1 + %2 >= %3 ? %4 : 0
+ */
+.macro ADD_IF_GE a, b, c, d
+	mov     \a, RTA
+	add     $\d, RTA
+	cmp     $\c, \b
+	cmovge  RTA, \a
+.endm
+
 /*
  * macro implements 80 rounds of SHA-1, for multiple blocks with s/w pipelining
  */
@@ -463,13 +472,16 @@
 	lea	(2*4*80+32)(%rsp), WK_BUF
 
 	# Precalc WK for first 2 blocks
-	PRECALC_OFFSET = 0
+	ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 2, 64
 	.set i, 0
 	.rept    160
 		PRECALC i
 		.set i, i + 1
 	.endr
-	PRECALC_OFFSET = 128
+
+	/* Go to next block if needed */
+	ADD_IF_GE BUFFER_PTR, BLOCKS_CTR, 3, 128
+	ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128
 	xchg	WK_BUF, PRECALC_BUF
 
 	.align 32
@@ -479,8 +491,8 @@ _loop:
 	 * we use K_BASE value as a signal of a last block,
 	 * it is set below by: cmovae BUFFER_PTR, K_BASE
 	 */
-	cmp	K_BASE, BUFFER_PTR
-	jne	_begin
+	test BLOCKS_CTR, BLOCKS_CTR
+	jnz _begin
 	.align 32
 	jmp	_end
 	.align 32
@@ -512,10 +524,10 @@ _loop0:
 		.set j, j+2
 	.endr
 
-	add	$(2*64), BUFFER_PTR       /* move to next odd-64-byte block */
-	cmp	BUFFER_END, BUFFER_PTR    /* is current block the last one? */
-	cmovae	K_BASE, BUFFER_PTR	/* signal the last iteration smartly */
-
+	/* Update Counter */
+	sub $1, BLOCKS_CTR
+	/* Move to the next block only if needed*/
+	ADD_IF_GE BUFFER_PTR, BLOCKS_CTR, 4, 128
 	/*
 	 * rounds
 	 * 60,62,64,66,68
@@ -532,8 +544,8 @@ _loop0:
 	UPDATE_HASH	12(HASH_PTR), D
 	UPDATE_HASH	16(HASH_PTR), E
 
-	cmp	K_BASE, BUFFER_PTR	/* is current block the last one? */
-	je	_loop
+	test	BLOCKS_CTR, BLOCKS_CTR
+	jz	_loop
 
 	mov	TB, B
 
@@ -575,10 +587,10 @@ _loop2:
 		.set j, j+2
 	.endr
 
-	add	$(2*64), BUFFER_PTR2      /* move to next even-64-byte block */
-
-	cmp	BUFFER_END, BUFFER_PTR2   /* is current block the last one */
-	cmovae	K_BASE, BUFFER_PTR       /* signal the last iteration smartly */
+	/* update counter */
+	sub     $1, BLOCKS_CTR
+	/* Move to the next block only if needed*/
+	ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128
 
 	jmp	_loop3
 _loop3:
@@ -641,19 +653,12 @@ _loop3:
 
 	avx2_zeroupper
 
-	lea	K_XMM_AR(%rip), K_BASE
-
+	/* Setup initial values */
 	mov	CTX, HASH_PTR
 	mov	BUF, BUFFER_PTR
-	lea	64(BUF), BUFFER_PTR2
 
-	shl	$6, CNT			/* mul by 64 */
-	add	BUF, CNT
-	add	$64, CNT
-	mov	CNT, BUFFER_END
-
-	cmp	BUFFER_END, BUFFER_PTR2
-	cmovae	K_BASE, BUFFER_PTR2
+	mov	BUF, BUFFER_PTR2
+	mov	CNT, BLOCKS_CTR
 
 	xmm_mov	BSWAP_SHUFB_CTL(%rip), YMM_SHUFB_BSWAP
 

arch/x86/crypto/sha1_ssse3_glue.c

@@ -201,7 +201,7 @@ asmlinkage void sha1_transform_avx2(u32 *digest, const char *data,
 
 static bool avx2_usable(void)
 {
-	if (false && avx_usable() && boot_cpu_has(X86_FEATURE_AVX2)
+	if (avx_usable() && boot_cpu_has(X86_FEATURE_AVX2)
 		&& boot_cpu_has(X86_FEATURE_BMI1)
 		&& boot_cpu_has(X86_FEATURE_BMI2))
 		return true;

arch/x86/entry/entry_64.S

@@ -1190,6 +1190,8 @@ ENTRY(nmi)
 	 * other IST entries.
 	 */
 
+	ASM_CLAC
+
 	/* Use %rdx as our temp variable throughout */
 	pushq	%rdx
 

arch/x86/include/asm/elf.h

@@ -247,11 +247,11 @@ extern int force_personality32;
 
 /*
  * This is the base location for PIE (ET_DYN with INTERP) loads. On
- * 64-bit, this is raised to 4GB to leave the entire 32-bit address
+ * 64-bit, this is above 4GB to leave the entire 32-bit address
  * space open for things that want to use the area for 32-bit pointers.
  */
 #define ELF_ET_DYN_BASE		(mmap_is_ia32() ? 0x000400000UL : \
-						  0x100000000UL)
+						  (TASK_SIZE / 3 * 2))
 
 /* This yields a mask that user programs can use to figure out what
    instruction set this CPU supports.  This could be done in user space,

arch/x86/kernel/cpu/perf_event_intel_lbr.c

@@ -153,7 +153,7 @@ static void __intel_pmu_lbr_enable(bool pmi)
 	 */
 	if (cpuc->lbr_sel)
 		lbr_select = cpuc->lbr_sel->config;
-	if (!pmi)
+	if (!pmi && cpuc->lbr_sel)
 		wrmsrl(MSR_LBR_SELECT, lbr_select);
 
 	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
@@ -432,8 +432,10 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 	int out = 0;
 	int num = x86_pmu.lbr_nr;
 
-	if (cpuc->lbr_sel->config & LBR_CALL_STACK)
-		num = tos;
+	if (cpuc->lbr_sel) {
+		if (cpuc->lbr_sel->config & LBR_CALL_STACK)
+			num = tos;
+	}
 
 	for (i = 0; i < num; i++) {
 		unsigned long lbr_idx = (tos - i) & mask;

drivers/acpi/apei/ghes.c

@@ -1067,6 +1067,7 @@ static int ghes_remove(struct platform_device *ghes_dev)
 		if (list_empty(&ghes_sci))
 			unregister_acpi_hed_notifier(&ghes_notifier_sci);
 		mutex_unlock(&ghes_list_mutex);
+		synchronize_rcu();
 		break;
 	case ACPI_HEST_NOTIFY_NMI:
 		ghes_nmi_remove(ghes);

drivers/acpi/ioapic.c

@@ -45,6 +45,12 @@ static acpi_status setup_res(struct acpi_resource *acpi_res, void *data)
 	struct resource *res = data;
 	struct resource_win win;
 
+	/*
+	 * We might assign this to 'res' later, make sure all pointers are
+	 * cleared before the resource is added to the global list
+	 */
+	memset(&win, 0, sizeof(win));
+
 	res->flags = 0;
 	if (acpi_dev_filter_resource_type(acpi_res, IORESOURCE_MEM) == 0)
 		return AE_OK;

drivers/gpu/drm/drm_atomic.c

@@ -1247,6 +1247,9 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
 	if (config->funcs->atomic_check)
 		ret = config->funcs->atomic_check(state->dev, state);
 
+	if (ret)
+		return ret;
+
 	if (!state->allow_modeset) {
 		for_each_crtc_in_state(state, crtc, crtc_state, i) {
 			if (drm_atomic_crtc_needs_modeset(crtc_state)) {
@@ -1257,7 +1260,7 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
 		}
 	}
 
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(drm_atomic_check_only);
 

drivers/gpu/drm/drm_gem.c

@@ -715,13 +715,13 @@ drm_gem_object_release_handle(int id, void *ptr, void *data)
 	struct drm_gem_object *obj = ptr;
 	struct drm_device *dev = obj->dev;
 
+	if (dev->driver->gem_close_object)
+		dev->driver->gem_close_object(obj, file_priv);
+
 	if (drm_core_check_feature(dev, DRIVER_PRIME))
 		drm_gem_remove_prime_handles(obj, file_priv);
 	drm_vma_node_revoke(&obj->vma_node, file_priv->filp);
 
-	if (dev->driver->gem_close_object)
-		dev->driver->gem_close_object(obj, file_priv);
-
 	drm_gem_object_handle_unreference_unlocked(obj);
 
 	return 0;

drivers/gpu/drm/rcar-du/rcar_du_crtc.c

@@ -148,8 +148,8 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 	rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0);
 
 	/* Signal polarities */
-	value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : DSMR_VSL)
-	      | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : DSMR_HSL)
+	value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DSMR_VSL : 0)
+	      | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DSMR_HSL : 0)
 	      | DSMR_DIPM_DE | DSMR_CSPM;
 	rcar_du_crtc_write(rcrtc, DSMR, value);
 
@@ -171,7 +171,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 					mode->crtc_vsync_start - 1);
 	rcar_du_crtc_write(rcrtc, VCR,  mode->crtc_vtotal - 1);
 
-	rcar_du_crtc_write(rcrtc, DESR,  mode->htotal - mode->hsync_start);
+	rcar_du_crtc_write(rcrtc, DESR,  mode->htotal - mode->hsync_start - 1);
 	rcar_du_crtc_write(rcrtc, DEWR,  mode->hdisplay);
 }
 

drivers/gpu/drm/rcar-du/rcar_du_kms.c

@@ -642,13 +642,13 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
 	}
 
 	ret = rcar_du_encoder_init(rcdu, enc_type, output, encoder, connector);
-	of_node_put(encoder);
-	of_node_put(connector);
-
 	if (ret && ret != -EPROBE_DEFER)
 		dev_warn(rcdu->dev,
-			 "failed to initialize encoder %s (%d), skipping\n",
-			 encoder->full_name, ret);
+			 "failed to initialize encoder %s on output %u (%d), skipping\n",
+			 of_node_full_name(encoder), output, ret);
+
+	of_node_put(encoder);
+	of_node_put(connector);
 
 	return ret;
 }

drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c

@@ -56,11 +56,11 @@ static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
 		return ret;
 
 	/* PLL clock configuration */
-	if (freq <= 38000)
+	if (freq < 39000)
 		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
-	else if (freq <= 60000)
+	else if (freq < 61000)
 		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
-	else if (freq <= 121000)
+	else if (freq < 121000)
 		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
 	else
 		pllcr = LVDPLLCR_PLLDLYCNT_150M;
@@ -102,7 +102,7 @@ static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
 	/* Turn the PLL on, wait for the startup delay, and turn the output
 	 * on.
 	 */
-	lvdcr0 |= LVDCR0_PLLEN;
+	lvdcr0 |= LVDCR0_PLLON;
 	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 
 	usleep_range(100, 150);

drivers/gpu/drm/rcar-du/rcar_lvds_regs.h

@@ -18,7 +18,7 @@
 #define LVDCR0_DMD			(1 << 12)
 #define LVDCR0_LVMD_MASK		(0xf << 8)
 #define LVDCR0_LVMD_SHIFT		8
-#define LVDCR0_PLLEN			(1 << 4)
+#define LVDCR0_PLLON			(1 << 4)
 #define LVDCR0_BEN			(1 << 2)
 #define LVDCR0_LVEN			(1 << 1)
 #define LVDCR0_LVRES			(1 << 0)

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -294,7 +294,7 @@ static void dw_i2c_plat_complete(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM
-static int dw_i2c_plat_suspend(struct device *dev)
+static int dw_i2c_plat_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
@@ -318,11 +318,21 @@ static int dw_i2c_plat_resume(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_plat_suspend(struct device *dev)
+{
+	pm_runtime_resume(dev);
+	return dw_i2c_plat_runtime_suspend(dev);
+}
+#endif
+
 static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
 	.complete = dw_i2c_plat_complete,
 	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
+	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
+			   dw_i2c_plat_resume,
+			   NULL)
 };
 
 #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)

drivers/iio/common/hid-sensors/hid-sensor-trigger.c

@@ -36,8 +36,6 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 	s32 poll_value = 0;
 
 	if (state) {
-		if (!atomic_read(&st->user_requested_state))
-			return 0;
 		if (sensor_hub_device_open(st->hsdev))
 			return -EIO;
 
@@ -84,6 +82,9 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 				       &report_val);
 	}
 
+	pr_debug("HID_SENSOR %s set power_state %d report_state %d\n",
+		 st->pdev->name, state_val, report_val);
+
 	sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
 			       st->power_state.index,
 			       sizeof(state_val), &state_val);
@@ -107,6 +108,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 		ret = pm_runtime_get_sync(&st->pdev->dev);
 	else {
 		pm_runtime_mark_last_busy(&st->pdev->dev);
+		pm_runtime_use_autosuspend(&st->pdev->dev);
 		ret = pm_runtime_put_autosuspend(&st->pdev->dev);
 	}
 	if (ret < 0) {
@@ -175,8 +177,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 	/* Default to 3 seconds, but can be changed from sysfs */
 	pm_runtime_set_autosuspend_delay(&attrb->pdev->dev,
 					 3000);
-	pm_runtime_use_autosuspend(&attrb->pdev->dev);
-
 	return ret;
 error_unreg_trigger:
 	iio_trigger_unregister(trig);

drivers/iio/imu/adis16480.c

@@ -696,7 +696,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
 		.gyro_max_val = IIO_RAD_TO_DEGREE(22500),
 		.gyro_max_scale = 450,
 		.accel_max_val = IIO_M_S_2_TO_G(12500),
-		.accel_max_scale = 5,
+		.accel_max_scale = 10,
 	},
 	[ADIS16485] = {
 		.channels = adis16485_channels,