mirror of
https://github.com/armbian/linux.git
synced 2026-01-06 10:13:00 -08:00
[POWERPC] 8xx: mpc885ads cleanup
It now uses the new CPM binding and the generic pin/clock functions, and has assorted fixes and cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Scott Wood
Kumar Gala
@@ -2,6 +2,7 @@
|
||||
* MPC885 ADS Device Tree Source
|
||||
*
|
||||
* Copyright 2006 MontaVista Software, Inc.
|
||||
* Copyright 2007 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
@@ -12,7 +13,7 @@
|
||||
|
||||
/ {
|
||||
model = "MPC885ADS";
|
||||
compatible = "mpc8xx";
|
||||
compatible = "fsl,mpc885ads";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
@@ -23,156 +24,188 @@
|
||||
PowerPC,885@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <20>; // 32 bytes
|
||||
i-cache-line-size = <20>; // 32 bytes
|
||||
d-cache-size = <2000>; // L1, 8K
|
||||
i-cache-size = <2000>; // L1, 8K
|
||||
d-cache-line-size = <d#16>;
|
||||
i-cache-line-size = <d#16>;
|
||||
d-cache-size = <d#8192>;
|
||||
i-cache-size = <d#8192>;
|
||||
timebase-frequency = <0>;
|
||||
bus-frequency = <0>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <f 2>; // decrementer interrupt
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
interrupt-parent = <&PIC>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <00000000 800000>;
|
||||
reg = <0 0>;
|
||||
};
|
||||
|
||||
soc885@ff000000 {
|
||||
localbus@ff000100 {
|
||||
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
reg = <ff000100 40>;
|
||||
|
||||
ranges = <
|
||||
0 0 fe000000 00800000
|
||||
1 0 ff080000 00008000
|
||||
5 0 ff0a0000 00008000
|
||||
>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "jedec-flash";
|
||||
reg = <0 0 800000>;
|
||||
bank-width = <4>;
|
||||
device-width = <1>;
|
||||
};
|
||||
|
||||
board-control@1,0 {
|
||||
reg = <1 0 20 5 300 4>;
|
||||
compatible = "fsl,mpc885ads-bcsr";
|
||||
};
|
||||
};
|
||||
|
||||
soc@ff000000 {
|
||||
compatible = "fsl,mpc885", "fsl,pq1-soc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
ranges = <0 ff000000 00100000>;
|
||||
reg = <ff000000 00000200>;
|
||||
ranges = <0 ff000000 00004000>;
|
||||
bus-frequency = <0>;
|
||||
mdio@e80 {
|
||||
device_type = "mdio";
|
||||
compatible = "fs_enet";
|
||||
reg = <e80 8>;
|
||||
|
||||
// Temporary -- will go away once kernel uses ranges for get_immrbase().
|
||||
reg = <ff000000 4000>;
|
||||
|
||||
mdio@e00 {
|
||||
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
|
||||
reg = <e00 188>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
Phy0: ethernet-phy@0 {
|
||||
|
||||
PHY0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
Phy1: ethernet-phy@1 {
|
||||
|
||||
PHY1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
Phy2: ethernet-phy@2 {
|
||||
|
||||
PHY2: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
};
|
||||
|
||||
fec@e00 {
|
||||
ethernet@e00 {
|
||||
device_type = "network";
|
||||
compatible = "fs_enet";
|
||||
model = "FEC";
|
||||
device-id = <1>;
|
||||
compatible = "fsl,mpc885-fec-enet",
|
||||
"fsl,pq1-fec-enet";
|
||||
reg = <e00 188>;
|
||||
mac-address = [ 00 00 0C 00 01 FD ];
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <3 1>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
phy-handle = <&Phy1>;
|
||||
interrupt-parent = <&PIC>;
|
||||
phy-handle = <&PHY0>;
|
||||
linux,network-index = <0>;
|
||||
};
|
||||
|
||||
fec@1e00 {
|
||||
ethernet@1e00 {
|
||||
device_type = "network";
|
||||
compatible = "fs_enet";
|
||||
model = "FEC";
|
||||
device-id = <2>;
|
||||
compatible = "fsl,mpc885-fec-enet",
|
||||
"fsl,pq1-fec-enet";
|
||||
reg = <1e00 188>;
|
||||
mac-address = [ 00 00 0C 00 02 FD ];
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <7 1>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
phy-handle = <&Phy2>;
|
||||
interrupt-parent = <&PIC>;
|
||||
phy-handle = <&PHY1>;
|
||||
linux,network-index = <1>;
|
||||
};
|
||||
|
||||
Mpc8xx_pic: pic@ff000000 {
|
||||
PIC: interrupt-controller@0 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0 24>;
|
||||
device_type = "mpc8xx-pic";
|
||||
compatible = "CPM";
|
||||
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
|
||||
};
|
||||
|
||||
pcmcia@0080 {
|
||||
pcmcia@80 {
|
||||
#address-cells = <3>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
compatible = "fsl,pq-pcmcia";
|
||||
device_type = "pcmcia";
|
||||
reg = <80 80>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
interrupt-parent = <&PIC>;
|
||||
interrupts = <d 1>;
|
||||
};
|
||||
|
||||
cpm@ff000000 {
|
||||
cpm@9c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "cpm";
|
||||
model = "CPM";
|
||||
ranges = <0 0 4000>;
|
||||
reg = <860 f0>;
|
||||
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
|
||||
command-proc = <9c0>;
|
||||
brg-frequency = <0>;
|
||||
interrupts = <0 2>; // cpm error interrupt
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
interrupts = <0>; // cpm error interrupt
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
reg = <9c0 40 2000 1c00>;
|
||||
ranges;
|
||||
|
||||
Cpm_pic: pic@930 {
|
||||
brg@9f0 {
|
||||
compatible = "fsl,mpc885-brg",
|
||||
"fsl,cpm1-brg",
|
||||
"fsl,cpm-brg";
|
||||
reg = <9f0 10>;
|
||||
};
|
||||
|
||||
CPM_PIC: interrupt-controller@930 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupts = <5 2 0 2>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
interrupt-parent = <&PIC>;
|
||||
reg = <930 20>;
|
||||
device_type = "cpm-pic";
|
||||
compatible = "CPM";
|
||||
compatible = "fsl,mpc885-cpm-pic",
|
||||
"fsl,cpm1-pic";
|
||||
};
|
||||
|
||||
smc@a80 {
|
||||
serial@a80 {
|
||||
device_type = "serial";
|
||||
compatible = "cpm_uart";
|
||||
model = "SMC";
|
||||
device-id = <1>;
|
||||
compatible = "fsl,mpc885-smc-uart",
|
||||
"fsl,cpm1-smc-uart";
|
||||
reg = <a80 10 3e80 40>;
|
||||
clock-setup = <00ffffff 0>;
|
||||
rx-clock = <1>;
|
||||
tx-clock = <1>;
|
||||
current-speed = <0>;
|
||||
interrupts = <4 3>;
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
interrupts = <4>;
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
fsl,cpm-brg = <1>;
|
||||
fsl,cpm-command = <0090>;
|
||||
};
|
||||
|
||||
smc@a90 {
|
||||
serial@a90 {
|
||||
device_type = "serial";
|
||||
compatible = "cpm_uart";
|
||||
model = "SMC";
|
||||
device-id = <2>;
|
||||
reg = <a90 20 3f80 40>;
|
||||
clock-setup = <ff00ffff 90000>;
|
||||
rx-clock = <2>;
|
||||
tx-clock = <2>;
|
||||
current-speed = <0>;
|
||||
interrupts = <3 3>;
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
compatible = "fsl,mpc885-smc-uart",
|
||||
"fsl,cpm1-smc-uart";
|
||||
reg = <a90 10 3f80 40>;
|
||||
interrupts = <3>;
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
fsl,cpm-brg = <2>;
|
||||
fsl,cpm-command = <00d0>;
|
||||
};
|
||||
|
||||
scc@a40 {
|
||||
ethernet@a40 {
|
||||
device_type = "network";
|
||||
compatible = "fs_enet";
|
||||
model = "SCC";
|
||||
device-id = <3>;
|
||||
reg = <a40 18 3e00 80>;
|
||||
mac-address = [ 00 00 0C 00 03 FD ];
|
||||
interrupts = <1c 3>;
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
phy-handle = <&Phy2>;
|
||||
compatible = "fsl,mpc885-scc-enet",
|
||||
"fsl,cpm1-scc-enet";
|
||||
reg = <a40 18 3e00 100>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <1c>;
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
phy-handle = <&PHY2>;
|
||||
fsl,cpm-command = <0080>;
|
||||
linux,network-index = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "/soc/cpm/serial@a80";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.23-rc4
|
||||
# Tue Aug 28 21:24:45 2007
|
||||
# Linux kernel version: 2.6.23-rc3
|
||||
# Mon Aug 27 15:23:16 2007
|
||||
#
|
||||
# CONFIG_PPC64 is not set
|
||||
|
||||
@@ -38,6 +38,7 @@ CONFIG_OF=y
|
||||
# CONFIG_PPC_UDBG_16550 is not set
|
||||
# CONFIG_GENERIC_TBSYNC is not set
|
||||
CONFIG_AUDIT_ARCH=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
# CONFIG_DEFAULT_UIMAGE is not set
|
||||
# CONFIG_PPC_DCR_NATIVE is not set
|
||||
# CONFIG_PPC_DCR_MMIO is not set
|
||||
@@ -69,24 +70,25 @@ CONFIG_SYSCTL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_SYSCTL_SYSCALL is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
# CONFIG_BUG is not set
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BUG=y
|
||||
# CONFIG_ELF_CORE is not set
|
||||
# CONFIG_BASE_FULL is not set
|
||||
CONFIG_FUTEX=y
|
||||
# CONFIG_FUTEX is not set
|
||||
CONFIG_ANON_INODES=y
|
||||
# CONFIG_EPOLL is not set
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SIGNALFD=y
|
||||
CONFIG_TIMERFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_SHMEM=y
|
||||
# CONFIG_VM_EVENT_COUNTERS is not set
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
CONFIG_SLUB_DEBUG=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_RT_MUTEXES=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=1
|
||||
# CONFIG_MODULES is not set
|
||||
@@ -100,14 +102,14 @@ CONFIG_BLOCK=y
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_DEFAULT_AS is not set
|
||||
CONFIG_DEFAULT_DEADLINE=y
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||
|
||||
#
|
||||
# Platform support
|
||||
@@ -120,6 +122,7 @@ CONFIG_CPM1=y
|
||||
# CONFIG_MPC8XXFADS is not set
|
||||
# CONFIG_MPC86XADS is not set
|
||||
CONFIG_MPC885ADS=y
|
||||
# CONFIG_PPC_EP88XC is not set
|
||||
|
||||
#
|
||||
# Freescale Ethernet driver platform-specific options
|
||||
@@ -137,6 +140,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
|
||||
#
|
||||
CONFIG_8xx_COPYBACK=y
|
||||
# CONFIG_8xx_CPU6 is not set
|
||||
CONFIG_8xx_CPU15=y
|
||||
CONFIG_NO_UCODE_PATCH=y
|
||||
# CONFIG_USB_SOF_UCODE_PATCH is not set
|
||||
# CONFIG_I2C_SPI_UCODE_PATCH is not set
|
||||
@@ -153,23 +157,23 @@ CONFIG_NO_UCODE_PATCH=y
|
||||
# CONFIG_GENERIC_IOMAP is not set
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
# CONFIG_CPM2 is not set
|
||||
# CONFIG_FSL_ULI1575 is not set
|
||||
CONFIG_PPC_CPM_NEW_BINDING=y
|
||||
|
||||
#
|
||||
# Kernel options
|
||||
#
|
||||
# CONFIG_HIGHMEM is not set
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_100=y
|
||||
# CONFIG_HZ_250 is not set
|
||||
# CONFIG_HZ_300 is not set
|
||||
CONFIG_HZ_1000=y
|
||||
CONFIG_HZ=1000
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=100
|
||||
CONFIG_PREEMPT_NONE=y
|
||||
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
CONFIG_MATH_EMULATION=y
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
@@ -185,11 +189,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_PROC_DEVICETREE is not set
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_SECCOMP is not set
|
||||
# CONFIG_WANT_DEVICE_TREE is not set
|
||||
CONFIG_WANT_DEVICE_TREE=y
|
||||
CONFIG_DEVICE_TREE="mpc885ads.dts"
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
@@ -206,6 +211,7 @@ CONFIG_FSL_SOC=y
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Advanced setup
|
||||
@@ -234,10 +240,6 @@ CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM=y
|
||||
# CONFIG_XFRM_USER is not set
|
||||
# CONFIG_XFRM_SUB_POLICY is not set
|
||||
# CONFIG_XFRM_MIGRATE is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
@@ -257,9 +259,9 @@ CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
@@ -319,22 +321,91 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
# CONFIG_DEBUG_DEVRES is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
# CONFIG_CONNECTOR is not set
|
||||
# CONFIG_MTD is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
# CONFIG_MTD_PARTITIONS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_NOSWAP=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
# CONFIG_MTD_CFI_I1 is not set
|
||||
# CONFIG_MTD_CFI_I2 is not set
|
||||
CONFIG_MTD_CFI_I4=y
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_OTP is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
# CONFIG_MTD_NAND is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
CONFIG_OF_DEVICE=y
|
||||
# CONFIG_PARPORT is not set
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_BLK_DEV is not set
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
@@ -368,16 +439,15 @@ CONFIG_DAVICOM_PHY=y
|
||||
# CONFIG_SMSC_PHY is not set
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
# CONFIG_ICPLUS_PHY is not set
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIXED_MII_10_FDX=y
|
||||
# CONFIG_FIXED_MII_100_FDX is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
# CONFIG_MDIO_BITBANG is not set
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_FS_ENET=y
|
||||
CONFIG_FS_ENET_HAS_SCC=y
|
||||
# CONFIG_FS_ENET_HAS_SCC is not set
|
||||
CONFIG_FS_ENET_HAS_FEC=y
|
||||
CONFIG_NETDEV_1000=y
|
||||
CONFIG_NETDEV_10000=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
|
||||
#
|
||||
# Wireless LAN
|
||||
@@ -397,55 +467,12 @@ CONFIG_NETDEV_10000=y
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
# CONFIG_INPUT_POLLDEV is not set
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
CONFIG_KEYBOARD_ATKBD=y
|
||||
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||
# CONFIG_KEYBOARD_LKKBD is not set
|
||||
# CONFIG_KEYBOARD_XTKBD is not set
|
||||
# CONFIG_KEYBOARD_NEWTON is not set
|
||||
# CONFIG_KEYBOARD_STOWAWAY is not set
|
||||
CONFIG_INPUT_MOUSE=y
|
||||
CONFIG_MOUSE_PS2=y
|
||||
CONFIG_MOUSE_PS2_ALPS=y
|
||||
CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
||||
CONFIG_MOUSE_PS2_SYNAPTICS=y
|
||||
CONFIG_MOUSE_PS2_LIFEBOOK=y
|
||||
CONFIG_MOUSE_PS2_TRACKPOINT=y
|
||||
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TABLET is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_I8042=y
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
@@ -493,20 +520,7 @@ CONFIG_GEN_RTC=y
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_ABITUGURU3 is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
# CONFIG_HWMON is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
@@ -530,7 +544,7 @@ CONFIG_DAB=y
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_FB_IBM_GXT4500 is not set
|
||||
|
||||
@@ -538,22 +552,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_MMC is not set
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
# CONFIG_EDAC is not set
|
||||
@@ -580,19 +579,9 @@ CONFIG_USB_SUPPORT=y
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
@@ -601,10 +590,9 @@ CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_INOTIFY is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
@@ -645,6 +633,7 @@ CONFIG_RAMFS=y
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
CONFIG_CRAMFS=y
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
@@ -711,15 +700,13 @@ CONFIG_MSDOS_PARTITION=y
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_BITREVERSE=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC32 is not set
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_PLIST=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAS_DMA=y
|
||||
@@ -734,11 +721,33 @@ CONFIG_HAS_DMA=y
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_SHIRQ is not set
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
CONFIG_SCHED_DEBUG=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_TIMER_STATS is not set
|
||||
# CONFIG_SLUB_DEBUG_ON is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_MUTEXES is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
# CONFIG_DEBUG_LIST is not set
|
||||
CONFIG_FORCED_INLINING=y
|
||||
# CONFIG_FAULT_INJECTION is not set
|
||||
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||
# CONFIG_DEBUG_PAGEALLOC is not set
|
||||
# CONFIG_DEBUGGER is not set
|
||||
# CONFIG_BDI_SWITCH is not set
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
|
||||
#
|
||||
|
||||
@@ -26,6 +26,7 @@ config MPC86XADS
|
||||
config MPC885ADS
|
||||
bool "MPC885ADS"
|
||||
select CPM1
|
||||
select PPC_CPM_NEW_BINDING
|
||||
help
|
||||
Freescale Semiconductor MPC885 Application Development System (ADS).
|
||||
Also known as DUET.
|
||||
|
||||
@@ -17,25 +17,10 @@
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
|
||||
/* U-Boot maps BCSR to 0xff080000 */
|
||||
#define BCSR_ADDR ((uint)0xff080000)
|
||||
#define BCSR_SIZE ((uint)32)
|
||||
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
|
||||
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
|
||||
#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
|
||||
#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
|
||||
#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
|
||||
|
||||
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
|
||||
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
|
||||
|
||||
#define MPC8xx_CPM_OFFSET (0x9c0)
|
||||
#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET)
|
||||
#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver
|
||||
|
||||
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
|
||||
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
|
||||
|
||||
/* Bits of interest in the BCSRs.
|
||||
*/
|
||||
#define BCSR1_ETHEN ((uint)0x20000000)
|
||||
@@ -64,28 +49,5 @@
|
||||
#define BCSR5_MII1_EN 0x02
|
||||
#define BCSR5_MII1_RST 0x01
|
||||
|
||||
/* Interrupt level assignments */
|
||||
#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
|
||||
#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
|
||||
#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
|
||||
#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
|
||||
|
||||
/* We don't use the 8259 */
|
||||
#define NR_8259_INTS 0
|
||||
|
||||
/* CPM Ethernet through SCC3 */
|
||||
#define PA_ENET_RXD ((ushort)0x0040)
|
||||
#define PA_ENET_TXD ((ushort)0x0080)
|
||||
#define PE_ENET_TCLK ((uint)0x00004000)
|
||||
#define PE_ENET_RCLK ((uint)0x00008000)
|
||||
#define PE_ENET_TENA ((uint)0x00000010)
|
||||
#define PC_ENET_CLSN ((ushort)0x0400)
|
||||
#define PC_ENET_RENA ((ushort)0x0800)
|
||||
|
||||
/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
|
||||
* SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
|
||||
#define SICR_ENET_MASK ((uint)0x00ff0000)
|
||||
#define SICR_ENET_CLKRT ((uint)0x002c0000)
|
||||
|
||||
#endif /* __ASM_MPC885ADS_H__ */
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user